Bộ ghi Hanyoung GR200-210

· Bảng điều khiển cảm ứng TFT-LCD 5,7 inch 640 x 480
– Đầu vào đa năng (Cặp nhiệt điện, RTD, VDC)
– Chế độ xem xu hướng có sẵn
– Bộ nhớ trong 80M byte và hỗ trợ thẻ nhớ SD/SDHC
– Giao tiếp RS 485/422 ( Modbus, PC-link )

· Suffix code

Model	Code			Information
GR200 –				Graphic recorder 145(W) x 145(H) x 173.5(D) ㎜
Input channel	2			2 channel
	4			4 channel
	8			8 channel
	12			12 channel
External contact input & output (DI / DO)		N		None
		1		DI 2 contact + DO 6 contacts
		2		DI 4 contact + DO 12 contacts
Communication function			0	RS422/485

· Specification

[ Range configuration for the input types ]

Input type			Measurement range(°C)	Measurement range(°F)	Degree
Thermoresistor (RTD)	Pt100Ω	Pt-0	-200 ~ 640	-300 ~ 1180	±0.15 % of F.S ±1digit
		Pt-1	-1 -200.0 ~ 640.0	-300.0 ~ 1180.0
		Pt-2	-200.00 ~ 640.00	-300.0 ~ 1180.0
	KPt100Ω	KPt-0	-200 ~ 500	-300 ~ 1000
		KPt-1	-200.0 ~ 500.0	-300.0 ~ 1000.0
		KPt-2	-100.00 ~ 150.00	-300.0 ~ 1000.0
Thermocouple (TC)	K	K-0	-200 ~ 1370	-300 ~ 2500	±0.15 % of F.S ±1digit
		K-1	-200.0 ~ 1370.0	-300 ~ 2500	±0.15 % of F.S ±1digit(*2)
	J		-200.0 ~ 1200.0	-300 ~ 2300	±0.15 % of F.S ±1digit(*2)
	E		-200.0 ~ 1000.0	-300 ~ 1800	±0.15 % of F.S ±1digit(*2)
	T		-200.0 ~ 400.0	-300 ~ 750	±0.15 % of F.S ±1digit(*3)
	R		0.0 ~ 1700.0	0 ~ 3100	±0.15 % of F.S ±1digit(*4)
	B		0.0 ~ 1800.0	0 ~ 3300	±0.15 % of F.S ±1digit (*1)
	S		0.0 – 1700.0	0 ~ 3100	±0.15 % of F.S ±1digit(*4)
	L		-200.0 ~ 900.0	-300 ~ 1300	±0.15 % of F.S ±1digit(*2)
	N		-200.0 ~ 1300.0	-300 ~ 2400	±0.15 % of F.S ±1digit(*3)
	U		-200.0 ~ 400.0	-300 ~ 750	±0.15 % of F.S ±1digit(*3)
	Wre 5-26		0.0 ~ 2300.0	0 ~ 4200	±0.15 % of F.S ±1digit(*4)
	PL-Ⅱ		0.0 ~ 1390.0	0 ~ 2500	±0.15 % of F.S ±1digit
VDC	-10 – 20 ㎷		-10.00 ~ 20.00		±0.15 % of F.S ±1digit * The current input (4~20㎃ DC) is available when you use resistance 250Ω (0.5W/0.1%) on input terminals
	0 – 100 ㎷		0.00 ~ 100.00
	1 – 5 V		1.00 ~ 5.00
	0 – 30 V		0.00 ~ 30.00

(*1) 0 ~ 400℃ : ±5% of F.S ± 1digit	(*3) -200 ~ -150℃ : ±0.4% of F.S ± 1digit
(*2) -200 ~ -150℃ : ±0.2% of F.S ± 1digit	-150 ~ -100℃ : ±0.2% of F.S ± 1digit
	(*4) 0 ~ 200℃ : ±0.2% of F.S ± 1digit

[ Specification for the input ]

VDC	Thermocouple (TC)	K, J, E, T, R, S, B, N	IEC 584
		PL-Ⅱ, Wre 5-26	ASTM E988
		U, L	DIN 43710, IEC 751
	Thermoresistor (RTD)	Pt100 Ω	DIN IEC 751
		KPt100 Ω	JIS C1604-1989 (OLD)

[Power input]

Power voltage	100 – 240 V AC Voltage fluctuation rate ±10 %
Power frequency	50 – 60 ㎐
Power consumption	22 VA max
Maximum internal fuse ratings	250 V AC
Internal voltage	Primary terminal* and secondary terminal** : Minimum 1500 VAC for 1 minute Primary terminal* and FG terminal : Minimum 1500 VAC for 1 minute Secondary terminal** and FG terminal : Minimum 1500 VAC for 1 minute Secondary terminal** and secondary terminal** : Minimum 500 VAC for 1 minute * Primary terminal : Power terminal (except the FG terminal) and the relay output terminal ** Secondary terminal : Sensor input terminal, contact input terminal, communication terminal
Insulation resistor	20 ㏁ between the power terminal and the FG terminal or 500 VDC

[Sensor input]

Number of channels	2, 4, 8, 12 (Refer to the type configuration)
Input type	2 thermoresistors (Pt-100, KPt-100) 12 thermocouples (K, J, E, T, R, B, S, L, N, U, Wre 5-26, PL-II) 4 VDC (-10 – 20 mV, 0 – 100 mV, 1 – 5V, 0 – 30 V)
Sampling period	250 ㎳
Current to measure the thermoresistor (RTD)	About 0.21 ㎃
Input resistor	Thermocouple : More than 1 ㏁, VDC : More than 1 ㏁
Allowable wiring resistor	Thermoresistor : Maximum 100Ω/wire (The RTD is up to 10Ω/wire for the range of -100.00 – .150.00) Thermocouple : Less than 200 Ω VDC : Less than 2 ㏀
Impact of the wiring resistor	Thermoresistor : ±0.3 °C/10 Ω (The 3 lines have the same wiring resistors)
Allowable input voltage	Thermocouple : Less than ±10 V DC, VDC : Less than ±33 V DC
Degree	±0.15 % of F.S, ±1 digit (Except the RJC temperature error) ※ Refer to the input table
The error in the reference junction compensation (RJC)	±2.0 ℃ (0 ~ 50 ℃)
Sensor short detection (Burn-out)	UP-Scale for the short

[Contact input]

Maximum input	4
Input method	No voltage contact input
On/Off detection resistor	Consider on less than 1 ㏀ minimum and off larger than 10 ㏀
Minimum detection time	0.25 second

[Alarm output]

Maximum number of outputs	12
Output type	Relay output
Maximum ratings	5 A 250 V AC, 5 A 30 V DC
Recommended ratings	3 A 250 V AC, 3 A 30 V DC
Relay life	50,000 times at the maximum ratings, 100,000 times at the recommended ratings

[Display specification]

Display	TFT color LCD (115.2 × 86.4 ㎜, resolution : 640 × 480 pixel, LED Backlight)
Backlight life	40,000 hours
Language in use	Korean, English, Chinese (simplified)

[Memory specification]

Save function	Internal memory – volatile memory : 900 KB – Save up to 4 hours with the interval of 1 second – Non-volatile memory : 80 MB . Save up to 15 days with the interval of 1 second External memory – SD card (8GB) : Save up to a 4 years with the interval of 1 second ※ Support the SDHC
Save period	User configuration (1, 2, 5, 10, 20, 30, 60, 120 seconds)
Memory information	Measurement from each channel, Burn-out, DI (contact input), ALARM, relay output status

[Use environment]

Ambient temperature	0 ~ 50 °C
Temperature change	10 °C/h or below
Ambient humidity	20 ~ 90 % RH (no condensation)

[Storage environment]

Ambient temperature	-20 ~ 70 °C
Temperature change	Less than 20 °C/h
Ambient humidity	5 – 95 % RH (no condensation)

[Impact from the ambient temperature]

VDC, thermocouple sensor	±0.01 % of F.S / °C
Thermoresistor sensor	±0.06 °C/°C