Đồng hồ đo dòng diện Hanyoung MP641H

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

MP34NH

MP64NH

MP341H

MP641H

– Máy đo tần số độc quyền
– Đo tần số bằng tín hiệu đầu vào điện áp AC
– Dải hiển thị rộng, 4 chữ số (-1999~9999)

· Suffix code

Model	Code				Content
MP					Digital Frequency Meter
Appearance	3				96 x 48 mm
Appearance	6				72 x 36 mm
Display digit		4			4 digits (9999)
Output (optional)			N		Display only
Output (optional)			1		Relay output (HI, GO, LO)
Measured input signal				H	AC input frequency measurement

※ Output optional specification can only be selected if MP6-4.

· Specification

[Input]

[Performance]

Accuracy	Max. ±5 digit
Insulation Resistance	Min. 100 ㏁ (500 V d.c.)
Dielectric strength	1500 V a.c. for 1 min (between input terminal and case)

[Functions]

Input range	(5 V ac, 50 V ac, 500 V ac), 0.1 Hz ~ 9999 Hz
Input correction	The measured value is corrected and displayed
Refresh interval	It is difficult to measure the exact value if the change of measured value is severe. In this case, it is possible to average the measured value by changing the refresh interval.
Decimal position	Select the display position of the decimal point
Hold function	Memorize the maximum input value or minimum input value or hold (stop) by an external signal.
Lock function	Limit the setting function of each parameter
Max. value display	The max. value of the measured present value is displayed
Min value display	The min. value of the measured present value is displayed.
High limit setting	Set the high limit set value (HSET) of the high limit output (HI)
Low limit setting	Set the lower limit set value (LSET) of the lower limit output (LO)
Output operation (PSOT) selection	If “OFF” is selected in output operation (OFF, HH, LH, HL, LL, IL), there is no limit on all operations. If you select any other output, only the selected function will operate.
Hysteresis settings	Hysteresis is set to prevent frequent output operation when the measured present value changes slightly near the set value

[Output]

Relay output

11a X 3 contacts (HI, GO, LO), (220 V a.c. 5 A)

※ MP6-4 only

[Specification]

Model	MP3-□H	MP6-□H
Power voltage	100 – 240 V a.c, 50/60 ㎐
Allowable voltage fluctuation range	85 – 264 V a.c
Power consumption	Approx. 5 VA
Weight ( g )	Approx. 180
Ambient temperature & humidity	-10 ~ 65 ℃ , 35 ~ 85 % RH (without condensation)
Storage temperature	-10 ~ 70 ℃
Vibration resistance	10 – 55 ㎐ single amplitude X·Y·Z each direction 2 hours
Shock resistance	300 ㎨, X·Y·Z each direction 3 times