Liên hệ
• Hoạt động với lực vận hành thấp (0,29 N) để phát hiện nhiều loại vật thể bao gồm các vật bằng thủy tinh, nhựa và cao su.
• Có sẵn các mẫu có đầu ra kỹ thuật số cho Bộ B7A và các mẫu có đầu ra tuyến tính từ 4 đến 20 mA tương ứng với dải đo từ 0 đến 5 mm.
• Các mẫu có bộ truyền động dạng quả cầu, dạng phẳng hoặc dạng chốt có sẵn cho nhiều đối tượng khác nhau.
• Đầu nối I/O Cảm biến XS3 giúp kết nối Cảm biến trở nên đơn giản.
| Measurement range | Output specifications | Actuator | Resolution | Model |
|---|---|---|---|---|
| 5 mm | 4 to 20 mA | Ball type | 10 μm | D5VA-3B1 |
| Pin type | D5VA-3P1 | |||
| Flat type (See note 1.) | D5VA-3F1 | |||
| B7A serial communications output (See note 2.) | Ball type | 1 μm | D5VM-3B1 | |
| Pin type | D5VM-3P1 | |||
| Flat type (See note 1.) | D5VM-3F1 |
Note:
1. Flat-type actuators have a hole 5-mm deep for an M2.5 screw in the tip so that an actuator can be mounted externally.
2. Use the D5VM-3[]1 in combination with the B7A Link Terminal Output Unit or a C200H or CQM1 B7A Interface Unit. Use 16- or 32-point Units with a standard transmission delay time (19.2 ms).
Conformance to EN50081-1, pr50082-2
| Rated current | 100 mA |
|---|---|
| Rated voltage | 24 VDC |
| Model | D5VA-3[]1 | D5VM-3[]1 |
|---|---|---|
| Supply voltage | 12 to 24 VDC±10% (See note 1.) | |
| Current consumption | 80 mA max. | |
| Measurement range | 5 mm | |
| Maximum actuator travel distance | Approx. 5.7 mm | |
| Offset adjustment range | ±0.25 mm | |
| Resolution | 10 μm | 1μm |
| Linearity | 0.5% FS max. | |
| Repeat accuracy | 10 μm max. | |
| Response time | 6 ms max. | 37 ms max. (including transmission delay time) |
| Operating force | 0.3 N max. | |
| Output | Linear current output: 4 to 20 mA (Allowable load resistance: 0 to 300 Ω) | B7A serial communications output (See note 2.) (BCD and multipoint ON/OFF output modes) (See note 3.) |
| Mounting method | Two M4 screws | |
| Indicators | Power and overtravel indicators | Power, overtravel, setting, and output indicators |
| Mechanical durability | 10,000,000 operations min. | |
| Temperature influence | ±0.04% FS/°C max. | |
| Operating temperature | -10 to 55 °C (with no icing or condensation) | |
| Storage temperature | -25 to 65 °C (with no icing or condensation) | |
| Humidity range | 35% to 85% (with no icing or condensation) | |
| Insulation resistance | 100 MΩ min. (at 100 VDC) | |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | |
| Noise resistance | 1.5 kV with a pulse width of 100 ns to 1 μs | |
| Vibration resistance | 10 to 55 Hz, 0.75-mm double amplitude | |
| Shock resistance | 196 m/s2 | |
| Connection cable | 2 m (XS3F-M421-402-R provided) | |
| Weight | Approx. 80 g (without cable) | |
| Material | ABS and PC polymer alloy | |
Note:
1. If power is supplied to both the D5VM-3[]1 and B7A Output Link Terminal from a single power supply, the supply voltage must be 24 VDC±10%.
2. Connectable models:
| Model number | Description |
|---|---|
| B7A-R6[][]1 B7AS-R6B[]1 | Screw-terminal models |
| B7A-R[]A[]3-[] | PC-connector models |
| C200H-B7A21 C200H-B7A22 C200H-B7A11 C200H-B7A12 | C200H B7A Interface Units |
| CQM1-B7A21 CQM1-B7A12 CQM1-B7A13 | CQM1 B7A Interface Units |
| CJ1W-B7A22 CJ1W-B7A14 CJ1W-B7A04 | CJW1 B7A Interface Units for use in standard mode only) |
3. BCD or multipoint output mode can be selected with the mode selector.
D5VA-3B1
D5VM-3B1
D5VA-3P1
D5VM-3P1
D5VA-3F1
D5VM-3F1
Đánh giá
Chưa có đánh giá nào.