Chưa có sản phẩm trong giỏ hàng.
Các mô hình với khả năng chống bắn tóe được cải thiện lý tưởng cho hàn cũng có sẵn.
Cảm biến tiệm cận Omron E2EC-Q
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Cải thiện độ bền với đầu cảm biến bằng thép không gỉ
Cải thiện độ bền với đầu cảm biến bằng thép không gỉ
E2EC-M
E2EC-Q
Sensing Surface có khả năng chống mài mòn gấp 10 lần so với các mẫu trước đây.
E2EC-M
E2EC-Q
Đầu cảm biến có chiều dài 18 mm. Lý tưởng để sử dụng nhúng trong các thiết bị.
E2EC-Q
Ngăn chặn sự bám dính của vết hàn vào Đầu cảm biến. (Mô hình chống bắn tóe cải tiến)
E2EC-Q
Sử dụng cáp florua (Mô hình chống bắn tóe cải tiến)
Đặc điểm
Sensors
| Appearance | Sensing distance | Output configuration | Model | |
|---|---|---|---|---|
| Operation mode: NO | ||||
Shielded When mounting to an iron surface | 8 dia. | 2 mm | DC 3-wire PNP | E2EC-MC2B1 2M |
| DC 2-wire (polarity) | E2EC-MC2D1 2M | |||
| DC 2-wire (no polarity) (3)-(4) pin arrangement | E2EC-QC2D1-M1GJ-T 0.3M | |||
Accessories (Order Separately)
Sensor I/O Connector
Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.
| Appearance | Cable length | Sensor I/O Connector model | Applicable Proximity Sensors | |
|---|---|---|---|---|
| Straight |  | 2 m | XS2F-D421-DD0 | E2EC-QC2D1-M1GJ-T |
| 5 m | XS2F-D421-GD0 | |||
| L-shape |  | 2 m | XS2F-D422-DD0 | |
| 5 m | XS2F-D422-GD0 | |||
Note: The Sensor I/O Connector models in the previous table are for standard cables. Be sure to use a heat-resistant
cable (XS2F-D42[]-[]80F) when using the Sensor in environments susceptible to spatter.
cable (XS2F-D42[]-[]80F) when using the Sensor in environments susceptible to spatter.
Thông số kỹ thuật
| Type | DC 3-Wire PNP Models | DC 2-Wire Models | DC 2-Wire Models (no polarity) (spatter-resistant type) | ||
|---|---|---|---|---|---|
| Size | 8 dia. (Sensing Head) | ||||
| Shielding | Shielded | ||||
| Model | E2EC-MC2B1 | E2EC-MC2D1 | E2EC-QC2D1-M1GJ-T | ||
| Sensing distance | 2 mm ± 15% | 2 mm ± 10% | |||
| Set distance | 0 to 1.2 mm | 0 to 1.4 mm | |||
| Differential travel | 15% max. of sensing distance | ||||
| Detectable object | Ferrous metals (The sensing distance will decreases with non-ferrous metal. Refer to Engineering Data (Reference Value) on Data Sheet.) | ||||
| Standard sensing object | Iron, 8 × 8 × 1 mm | ||||
| Response frequency | 100 Hz | ||||
| Power supply voltage (operating voltage range) | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) | ||||
| Current consumption | 10 mA max. | — | |||
| Leakage current | — | 0.8 mA max. | |||
| Control output | Load current | 100 mA max. | 3 to 50 mA | ||
| Residual voltage | 2 V max. (Load current: 100 mA, Cable length: 2 m) | 3 V max. (Load current: 50 mA, Cable length: 2 m) | 5 V max. (Load current: 50 mA, Cable length: 2 m) | ||
| Indicators | Operation indicator (yellow) | Operation indicator (red), Setting indicator (green) | |||
| Operation mode (with sensing object approaching) | NO (normally open) Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details. | ||||
| Protection circuits | Power supply reverse polarity protection, Surge suppressor, Load short-circuit protection, Reversed output polarity protection | Surge suppressor, Load short-circuit protection | |||
| Ambient temperature range | Operating and storage: – 25 to 70 ° C (with no icing or condensation) | ||||
| Ambient humidity range | Operating and storage: 35% to 95% (with no condensation) | ||||
| Temperature influence | ± 20% max. of sensing distance at 23 ° C in the temperature range of – 25 to 70 ° C | ||||
| Voltage influence | ± 5% max. of sensing distance at rated voltage in the rated voltage ± 15% range | ± 1% max. of sensing distance at the rated voltage range in the voltage range of ± 15% | |||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
| Dielectric strength | 1,000 VAC for 1 min between current carrying-parts and case | ||||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, Z directions | ||||
| Degree of protection | IEC IP67, In-house standards: oil-resistant (For Sensor Head only) | ||||
| Connection method | Pre-wired Connector Models (Standard cable length: 2 m) | Connector Models (Standard cable length: 0.3 m) | |||
| Weight (packed state) | Approx. 65 g | Approx. 95 g | |||
| Materials | Sensor Head | Case | Stainless steel (SUS303) | Stainless steel (SUS303) Fluororesin coated | |
| Sensing surface (thickness) | Stainless steel (SUS303) (0.2 mm) | Stainless steel (SUS303) Fluororesin coated (0.2 mm) | |||
| Cable | Polyester elastomer (TPEE) (Shielded) | Fluoro-rubber (Shielded) | |||
| Cable Amplifier | Case | ABS resin | Stainless steel (SUS303) | ||
| Cable | Polyvinyl chloride (PVC) | Fluorocarbon cable (flame-resistant) | |||
| Accessories | Amplifier Mounting Bracket, instruction manual | ||||
Note: Time is required for the sensing distance to stabilize after the power supply is turned ON. Confirm operation
sufficiently in the actual operating environment and use the Sensor within the set distance to obtain a sufficient
sensing distance.
sufficiently in the actual operating environment and use the Sensor within the set distance to obtain a sufficient
sensing distance.
Kích thước
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Sensors
E2EC-MC2B1, E2EC-MC2D1
E2EC-QC2D1-M1GJ-T
Sensing Head Mounting Hole Dimensions
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | E2EC-Q |  |
Hãy là người đầu tiên nhận xét “Cảm biến tiệm cận Omron E2EC-Q”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.