Liên hệ
| Appearance | Sensing method | Sensing distance | Output type | Output configuration | Model |
|---|---|---|---|---|---|
 | Through-beam type (with slot) | 3.6 mm (slot width) (Infrared light) | NPN output | Dark-ON | EE-SPX301 |
| Light-ON | EE-SPX401 | ||||
Horizontal type | Reflective type | 5 mm (Infrared light) | Dark-ON | EE-SPY301 | |
| Light-ON | EE-SPY401 | ||||
Vertical type | Reflective type | 5 mm (Infrared light) | Dark-ON | EE-SPY302 | |
| Light-ON | EE-SPY40 |
| Type | Cable length | Model | Remarks | |
|---|---|---|---|---|
| Connector | EE-1002 | |||
| Connector | Connector with Cable | 1 m | EE-1003 | |
| NPN/PNP Conversion Connector | 0.46 m ( total length) | EE-2001 | ||
| Connector Hold-down Clip | EE-1003A | For EE-1003 only. | ||
* Refer to Accessories for details.
| Sensing method | Through-beam type (with slot) | Reflective type | |
|---|---|---|---|
| Models | EE-SPX301, EE-SPX401 | EE-SPY301, EE-SPY401 EE-SPY302, EE-SPY402 | |
| Sensing distance | 3.6 mm (slot width) | 5 mm (Reflection factor: 90%; white paper 15 × 15 mm) *1 | |
| Sensing object | Opaque: 1 × 0.5 mm min. | — | |
| Differential distance | 0.05 mm max. | 0.2 mm max. (with a sensing distance of 3 mm, horizontally) | |
| Light source | GaAs infrared LED with a peak wavelength of 940 nm | ||
| Indicator *2 | Light indicator (red) | ||
| Supply voltage | 5 to 24 VDC ±10%, ripple (p-p): 5% max. | ||
| Current consumption | Average: 15 mA max., Peak: 50 mA max. | ||
| Control output | NPN voltage output: Load power supply voltage: 5 to 24 VDC Load current: 80 mA max. OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 1.0 V max. 10 mA load current with a residual voltage of 0.4 V max. | ||
| Response frequency *3 | 500 Hz min. | 100 Hz min. | |
| Ambient illumination | 3,000 lx max. with incandescent light or sunlight on the surface of the receiver | ||
| Ambient temperature range | Operating: – 10 to +55 ° C Storage: – 25 to +65 ° C (with no icing) | ||
| Ambient humidity range | Operating: 5% to 85% Storage: 5% to 95% (with no condensation) | ||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions | ||
| Shock resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions | ||
| Degree of protection | IEC IP50 | ||
| Connecting method | Special connector (soldering not possible) | ||
| Weight | Approx. 2.6 g | ||
| Material | Case | Polycarbonate | |
*1. Operation may not be possible near the Sensor.
*2. The indicator is a GaP red LED (peak wavelength: 700 nm).
*3. The response frequency was measured by detecting the following rotating disk.
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | EE-SPX301/ 401, EE-SPY30/ 40 | Item list of EE-SPX301/ 401, EE-SPY30/ 40 |
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | EE-SPX301/ 401, EE-SPY30/ 40 |  |
Đánh giá
Chưa có đánh giá nào.