Bộ mã hóa vòng quay Omron E6H-C

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: BỘ MÃ HÓA VÒNG QUAY, CẢM BIẾN OMRON, OMRON Từ khóa: cảm biến omron, cảm biến omron giá rẻ, cảm biến tiệm cận, cảm biến vi quang

Bộ mã hóa trục rỗng

• Mô hình tăng dần.

• Đường kính ngoài 40 mm.

• Độ phân giải lên đến 3.600 ppr.

• Thiết kế mỏng chỉ dày 26 mm.

Đặc điểm

Encoders

Power supply voltage	Output configuration	Resolution (pulses/rotation)	Model
5 to 24 VDC	Open-collector output	300, 360, 500, 600, 720, 800, 1,000, 1,024	E6H-CWZ6C (resolution) 0.5M Example: E6H-CWZ6C 300P/R 0.5M
		1,200, 1,500, 1,800, 2,000, 2,048
		2,500, 3,600
5 to 12 VDC	Voltage output	300, 360, 500, 600, 720, 800, 1,000, 1,024	E6H-CWZ3E (resolution) 0.5M Example: E6H-CWZ3E 300P/R 0.5M
		1,200, 1,500, 1,800, 2,000, 2,048
		2,500, 3,600
5 to 12 VDC	Line-driver output	300, 360, 500, 600, 720, 800, 1,000, 1,024	E6H-CWZ3X (resolution) 0.5M Example: E6H-CWZ3X 300P/R 0.5M
		1,200, 1,500, 1,800, 2,000, 2,048
		2,500, 3,600

Thông số kỹ thuật

Model		E6H-CWZ6C	E6H-CWZ3E	E6H-CWZ3X
Power supply voltage		5 VDC -5% to 24 VDC +15%, ripple (p-p): 5% max.	5 VDC -5% to 12 VDC +10%, ripple (p-p): 5% max.
*Current consumption 1**		100 mA max.		150 mA max.
Resolution (pulses/rotation)		300, 360, 500, 600, 720, 800, 1,000, 1,024, 1,200, 1,500, 1,800, 2,000, 2,048, 2,500, 3,600
Output phases		Phases A, B, and Z
Output configuration		Open-collector output	Voltage output	Line-driver output *4
Output capacity		Applied voltage: 35 VDC max. Sink current: 35 mA max. Residual voltage: 0.7 V max. (at sink current of 35 mA)	Output resistance: 1 kΩ Sink current: 30 mA max. Residual voltage: 0.7 V max. (at sink current of 30 mA)	Output current: High level: Io = -10 mA Low level: Is = 10 mA Output voltage: Vo = 2.5 V min. Vs = 0.5 V
Maximum response frequency *2		100 kHz
Phase difference between outputs		90°±45° between A and B (1/4 T ± 1/8 T)
Rise and fall times of output		1 μs max. (Control output voltage: 5 V, Load resistance: 1 kΩ, Output cable: 500 mm)		1 μs max. (Io = -10 mA, Is = 10 mA, Output cable: 500 mm)
Starting torque		1.5 mNm max.
Moment of inertia		2 × 10^-6 kgm² max.
Shaft loading	Radial	29.4 N
Shaft loading	Thrust	4.9 N
Maximum permissible speed		10,000 r/min
Ambient temperature range		Operating: -10 to 70°C (at 90% humidity max.), Storage: -30 to 85°C (with no icing)
Ambient humidity range		Operating/Storage: 95% max. (with no condensation)
Insulation resistance		Excluded because of capacitor ground.
Dielectric strength		Excluded because of capacitor ground.
Vibration resistance		Destruction: 10 to 500 Hz, 100 m/s² or 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		300 m/s² for 11 ms 3 times each in X, Y, and Z directions (excluding shock to the shaft)
*Degree of protection 3**		IEC 60529 IP50
Connection method		Pre-wired Models (Standard cable length: 0.5 m)
Material		Case: Iron, Main unit: Aluminum, Pressboard panel: SUS304
Weight (packed state)		Approx. 120 g
Accessories		Instruction manual

*1. An inrush current of approximately 6 A will flow for approximately 0.3 ms when the power is turned ON.
*2. The maximum electrical response speed is determined by the resolution and maximum response frequency as
follows:

This means that the Rotary Encoder will not operate electrically if its speed exceeds the maximum electrical
response speed.
*3. No protection is provided against water or oil.
*4. The line driver output is a data transmission circuit compatible with RS-422A and long-distance transmission is
possible with a twisted-pair cable. The quality is equivalent to AM26LS31.