Chưa có sản phẩm trong giỏ hàng.
| Actuator | Model | |
|---|---|---|
| Roller lever |  | HL-5000 * |
| Adjustable roller lever |  | HL-5030 * |
| Adjustable rod lever |  | HL-5050 * |
| Sealed plunger |  | HL-5100 * |
| Sealed roller plunger |  | HL-5200 |
| Coil spring |  | HL-5300 |
Công tắc hành trình Omron HL-5000
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Công tắc giới hạn thu nhỏ, kinh tế tự hào với cấu trúc cứng nhắc
• Đầu, Hộp và Nắp kết hợp với các bề mặt có gờ để duy trì độ bền.
• Cấu trúc Đầu độc đáo cung cấp OT lớn để vận hành trơn tru.
• Thiết kế lỗ luồn dây luồn dễ dàng.
• Lý tưởng cho ứng dụng trong máy in, máy tạo hình và máy nhẹ.
(Công tắc cao có đặc tính bịt kín cao, chẳng hạn như Công tắc WL hoặc D4C, ở những vị trí chịu dầu, nước hoặc mưa.)
• Các kiểu máy có đầu tiếp đất phù hợp với dấu CE.
Đặc điểm
* HL-5000 Limit Switches are offered with a choice of ground terminal/M5 tapping on the rear side conforming to various
standards. When placing an order, add the code to the model number to indicate if ground terminal/M5 tapping on the
rear side is required.
-G: with ground terminal/M5 tapping on the rear side.
standards. When placing an order, add the code to the model number to indicate if ground terminal/M5 tapping on the
rear side is required.
-G: with ground terminal/M5 tapping on the rear side.
Thông số kỹ thuật
Approved Standards
| Agency | Standard | File No. |
|---|---|---|
| CCC (CQC) | GB/T14048.5 | Contact your OMRON representative for details. |
Note: Ask your OMRON representative for information on approved models.
Ratings
| Rated voltage | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125 VAC 250 VAC | 5 5 | 1.5 1 | 0.7 0.5 | 3 3 | 2 1.5 | 1 0.8 | ||
| 12 VDC 24 VDC 125 VDC 250 VDC | 5 5 | 3 3 | 4 4 | 3 3 | ||||
| 0.4 0.4 | 0.2 0.2 | – | – | – | ||||
Note: 1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
| Inrush current | NC | 24 A max. |
|---|---|---|
| NO | 12 A max. |
Approved Standard Ratings
CCC (GB/T14048.5)
| Applicable category and ratings |
|---|
| AC-15 3 A/250 VAC |
Characteristics
| Degree of protection | IP65 | |
|---|---|---|
| Durability * | Mechanical | 10,000,000 operations min. (under rated conditions) |
| Electrical | See the following Electrical Durability. | |
| Operating speed | 5 mm/s to 0.5 m/s | |
| Operating frequency | Mechanical | 120 operations/min |
| Electrical | 30 operations/min | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact resistance | 25 mΩ max. (initial value) | |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity | |
| 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground | ||
| 1,500 VAC, 50/60 Hz for 1 min between each terminal and non-current-carrying metal part | ||
| Rated frequency | 50/60 Hz | |
| Vibration resistance | Malfunction | 10 to 55 Hz, 1.5-mm double amplitude |
| Shock resistance | Destruction | 1,000 m/s2 max. |
| Malfunction | 300 m/s2 max. | |
| Ambient operating temperature | -5°C to +65°C (with no icing) | |
| Ambient operating humidity | 35% to 95%RH | |
| Weight | Approx. 130 to 190 g | |
Note: 1. The above figures are initial values.
2. The above characteristics may vary depending on the model. For further details, contact your OMRON sales
representative.
* The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.
Contact your OMRON sales representative for more detailed information on other operating environments.
2. The above characteristics may vary depending on the model. For further details, contact your OMRON sales
representative.
* The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.
Contact your OMRON sales representative for more detailed information on other operating environments.
Kích thước
(Unit: mm)
Switches
(Dimensions not shown are the same as roller lever models.)
Roller Lever
HL-5000
Adjustable Roller Lever
HL-5030
Adjustable Rod Lever
HL-5050
Sealed Plunger
HL-5100
Sealed Roller Plunger
HL-5200
Coil Spring
HL-5300
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
* Measured with the types of the 31.5-mm arm or rod length.
OF and RF measured at the arm length of 75 mm for HL-5030, and 145 mm for HL-5050 (reference values).
MODEL
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | HL-5000 | Item list of HL-5000 |
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | HL-5000 |  |
Hãy là người đầu tiên nhận xét “Công tắc hành trình Omron HL-5000”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.