• HOTLINE: 0978 63 73 78
  • Email: vpevpe9@gmail.com
    • HOTLINE: 0978 63 73 78

    Công tắc hành trình Omron SHL

    Liên hệ

    phone
    Liên hệ :
    08 88 44 88 99
    phone
    Liên hệ :
    0978 63 73 78
    phone
    Liên hệ :
    0909 63 73 78

    Liên Hệ Tư Vấn




    Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
    Danh mục: , , Từ khóa: , , , , , ,

    • Kết hợp một công tắc với một lò xo cuộn bền trong vỏ cứng, độ chính xác cao.

    • Nhỏ gọn và sử dụng một công tắc cơ bản duy nhất cho các ứng dụng yêu cầu độ bền.

    • Các mô hình cho vi tải và các mô hình với các chỉ báo hoạt động được thêm vào chuỗi.

    • Vỏ bảo vệ đầu cuối có thể được chuyển sang dây cáp từ bên trái hoặc bên phải.

    • Các đặc tính bịt kín đáp ứng mức độ bảo vệ theo tiêu chuẩn IEC IP67.

    Đặc điểm

    Switches

     

    TypeStandardMicro load
    ActuatorModelModel
    Plunger
    331_lu_1_1
    		SHL-D55SHL-D55-01
    Panel mount plunger
    331_lu_1_2
    		SHL-Q55SHL-Q55-01
    Panel mount roller plunger
    331_lu_1_3
    		SHL-Q2255SHL-Q2255-01
    Panel mount crossroller plunger
    331_lu_1_4
    		SHL-Q2155SHL-Q2155-01
    Short hinge lever
    331_lu_1_5
    		SHL-W55SHL-W55-01
    Hinge lever
    331_lu_1_6
    		SHL-W155SHL-W155-01
    Short hinge roller lever
    331_lu_1_7
    		SHL-W255SHL-W255-01
    Hinge roller lever
    331_lu_1_8
    		SHL-W2155SHL-W2155-01
    One-way action short hinge roller lever
    331_lu_1_9
    		SHL-W355SHL-W355-01
    One-way action hinge roller lever
    331_lu_1_10
    		SHL-W3155SHL-W3155-01

     

     

    Note: Models are also available with molded terminals and with molded terminals and operation indicators. Refer to Data
    Sheet.

     

    Molded Terminal Models with Wire Cable

    Without Operation Indicator

     

    TypeStandardMicro load
    Location of
    lead outle    		ActuatorModelModel
    Right-handPlungerSHL-D55-MR VCTF 3MSHL-D55-01MR VCTF 3M
    Panel mount plungerSHL-Q55-MR VCTF 3MSHL-Q55-01MR VCTF 3M
    Panel mount roller plungerSHL-Q2255-MR VCTF 3MSHL-Q2255-01MR VCTF 3M
    Panel mount crossroller plungerSHL-Q2155-MR VCTF 3MSHL-Q2155-01MR VCTF 3M
    Short hinge leverSHL-W55-MR VCTF 3M–
    Hinge leverSHL-W155-MR VCTF 3M–
    Short hinge roller leverSHL-W255-MR VCTF 3MSHL-W255-01MR VCTF 3M
    Hinge roller leverSHL-W2155-MR VCTF 3MSHL-W2155-01MR VCTF 3M
    One-way action short hinge roller leverSHL-W355-MR VCTF 3M–
    Left-handPlungerSHL-D55-ML VCTF 3M–
    Panel mount roller plungerSHL-Q2255-ML VCTF 3MSHL-Q2255-01ML VCTF 3M
    Panel mount crossroller plungerSHL-Q2155-ML VCTF 3M–
    Short hinge leverSHL-W55-ML VCTF 3M–
    Hinge leverSHL-W155-ML VCTF 3M–
    Short hinge roller leverSHL-W255-ML VCTF 3M–
    Hinge roller leverSHL-W2155-ML VCTF 3MSHL-W2155-01ML VCTF 3M
    UndersidePlungerSHL-D55-MD VCTF 3M–
    Panel mount plungerSHL-Q55-MD VCTF 3M–
    Panel mount roller plungerSHL-Q2255-MD VCTF 3MSHL-Q2255-01MD VCTF 3M
    Panel mount crossroller plungerSHL-Q2155-MD VCTF 3M–
    Short hinge leverSHL-W55-MD VCTF 3M–
    Hinge leverSHL-W155-MD VCTF 3M–
    Short hinge roller leverSHL-W255-MD VCTF 3M–
    Hinge roller leverSHL-W2155-MD VCTF 3M–
    One-way action short hinge roller leverSHL-W355-MD VCTF 3M–

     

    Operation Indicator

     

    TypeStandardMicro load
    Location of
    lead outle    		ActuatorVoltage
    specifi-
    cation*    		ModelModel
    Right-handPlungerL3SHL-D55-L3MR VCTF 3MSHL-D55-01L3MR VCTF 3M
    L4SHL-D55-L4MR VCTF 3M–
    Panel mount plungerL3SHL-Q55-L3MR VCTF 3M–
    L4SHL-Q55-L4MR VCTF 3M–
    Panel mount roller plungerL2SHL-Q2255-L2MR VCTF 3M–
    L3SHL-Q2255-L3MR VCTF 3MSHL-Q2255-01L3MR VCTF 3M
    L4SHL-Q2255-L4MR VCTF 3MSHL-Q2255-01L4MR VCTF 3M
    Panel mount crossroller
    plunger    		L3SHL-Q2155-L3MR VCTF 3MSHL-Q2155-01L3MR VCTF 3M
    L4SHL-Q2155-L4MR VCTF 3MSHL-Q2155-01L4MR VCTF 3M
    Hinge leverL3SHL-W155-L3MR VCTF 3M–
    Short hinge roller leverL3SHL-W255-L3MR VCTF 3M–
    L4SHL-W255-L4MR VCTF 3MSHL-W255-01L4MR VCTF 3M
    Hinge roller leverL3SHL-W2155-L3MR VCTF 3M–
    L4SHL-W2155-L4MR VCTF 3MSHL-W2155-01L4MR VCTF 3M
    One-way action short hinge
    roller lever    		L4SHL-W355-L4MR VCTF 3M–
    Left-handPanel mount roller plungerL3SHL-Q2255-L3ML VCTF 3MSHL-Q2255-01L3ML VCTF 3M
    L4SHL-Q2255-L4ML VCTF 3M–
    Short hinge leverL3SHL-W55-L3ML VCTF 3M–
    Hinge leverL3SHL-W155-L3ML VCTF 3M–
    L4SHL-W155-L4ML VCTF 3M–
    Short hinge roller leverL3SHL-W255-L3ML VCTF 3M–
    L4–SHL-W255-01L4ML VCTF 3M
    UndersidePanel mount roller plungerL4SHL-Q2255-L4MD VCTF 3MSHL-Q2255-01L4MD VCTF 3M
    Short hinge roller leverL3SHL-W255-L3MD VCTF 3M–
    L4SHL-W255-L4MD VCTF 3M–
    Hinge roller leverL4SHL-W2155-L4MD VCTF 3M–

     

    * Refer to Voltage rating for voltage specifications on Data Sheet.

    Thông số kỹ thuật

    Approved Standards

     

    AgencyStandardFile No.Approved models
    ULUL508E76675General-purpose models listed on Data Sheet.
    CSACSA C22.2 No. 14LR45746
    TÜV RheinlandEN60947-5-1J50062486All SHL models listed in this datasheet.
    CCC (CQC)GB/T14048.5Contact your OMRON
    representative for details.    		Ask your OMRON representative for information
    on approved models.

     

    Ratings

     

    Rated voltageNon-inductive load (A)Inductive load (A)
    Resistive loadLamp loadInductive loadMotor load
    NCNONCNONCNONCNO
    125 VAC
    250 VAC
    480 VAC    		10
    10
    2    		1.5
    1.5
    –    		3
    2
    –    		2.5
    1.5
    –
    8 VDC
    14 VDC
    30 VDC
    125 VDC
    250 VDC    		10
    10
    5
    0.4
    0.2    		2
    2
    1.5
    0.4
    0.2    		5
    5
    1.5
    0.05
    0.03    		2
    2
    1.5
    0.05
    0.05

     

     

    Inrush currentNC15 A max.
    NO15 A max.

     

     

    Note: 1. The above figures are for steady-state currents.
    2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
    3. Lamp load has an inrush current of 10 times the steady-state current.
    4. Motor load has an inrush current of 6 times the steady-state current.

     

    Micro load models

     

    Rated voltageNon-inductive load (A)
    Resistive load
    NCNO
    125 VAC0.1
    8 VDC
    14 VDC
    30 VDC    		0.1
    0.1
    0.1

     

    Approved Standard Ratings

    TÜV (EN60947-5-1), CCC (GB/T14048.5)

     

    ModelCategory and ratingI the
    SHL-[]55AC-15 2 A/125 V
    DC-12 2 A/48 V    		5 A
    5 A
    SHL-[]55-01AC-14 0.1 A/125 V
    DC-12 0.1 A/48 V    		0.5 A
    0.5 A
    SHL-[]55-LAC-15 2 A/125 V5 A
    SHL-[]55-01LAC-14 0.1 A/125 V0.5 A
    SHL-[]55-01L2DC-12 0.1 A/12 V0.5 A
    SHL-[]55-L3DC-12 2 A/24 V5 A
    SHL-[]55-01L3DC-12 0.1 A/24 V0.5 A
    SHL-[]55-L4DC-12 2 A/24 V5 A
    SHL-[]55-01L4DC-12 0.1 A/24 V0.5 A
    SHL-[]55-L5DC-12 2 A/48 V5 A
    SHL-[]55-01L5DC-12 0.1 A/48 V0.5 A

     

     

    Note: “AC-15 2 A/125 V” indicates the following.
    Application category: AC-16
    Rated operating current (Ie): 2 A
    Rated operating voltage (Ue): 125 V

     

    UL/CSA

    A300

     

    Rated voltageCarry currentCurrent (A)Volt-amperes (V)
    MakeBreakMakeBreak
    120 VAC
    240 VAC    		10 A60
    30    		6
    3    		7,200720

     

    Characteristics (For SHL-W155)

     

    Degree of protections *1IP67 (EN60947-5-1)
    Durability *2Mechanical10,000,000 operations min.
    Electrical500,000 operations min.
    Operating speed0.1 mm/s to 0.5 m/s (hinge lever models)
    Operating
    frequency    		Mechanical120 operations/min
    Electrical30 operations/min
    Rated frequency50/60 Hz
    Insulation resistance100 MΩ min. (at 500 VDC)
    Contact resistance15 mΩ max. (initial value for the built-in switch when tested alone)
    Dielectric
    strength    		Between terminals of the same
    polarity    		1,000 VAC, 50/60 Hz for 1 min
    Between each terminal and
    non-current-carrying metal
    part    		2,000 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN60947-5-1)
    Rated insulation voltage (Ui)150 V (EN60947-5-1)
    Pollution degree (operating environment)3 (EN60947-5-1)
    Short-circuit protective device (SCPD)10 A fuse type gI or gG (IEC60269)
    Conditional short-circuit current100 A (EN60947-5-1)
    Conventional enclosed thermal current (Ithe)5 A (EN60947-5-1)
    Protection against electric shockClass II (grounding not required with double insulation)
    OFF reverse voltage1,000 VAC max., 300 VDC max. (EN60947-5-1)
    Vibration
    resistance    		Malfunction10 to 55 Hz, 1.5-mm double amplitude
    Shock
    resistance    		Destruction1,000 m/s2 max.
    Malfunction300 m/s2 max.
    Ambient operating temperature-10°C to +80°C (with no icing)
    Ambient operating humidity35% to 95%RH
    Weight *3Approx. 62 to 72 g
    Note: 1. The figures at the left are initial values.
    2. The ratings at the left may vary depending on the model. Contact your OMRON representative for further
    details.
    *1. The head section of the plunger type SHL-D(Q)[][] is excluded.
    *2. Durability values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to
    70%RH.
    *3. The values are for the plunger-type models.

    Kích thước

    (Unit: mm)

    Switches

    (Note: Omitted dimensions are the same as those of the plunger models.)

    Plunger
    SHL-D55
    SHL-D55-01

    SHL Dimensions 2

    Please click image to enlarge (open in a new window).

    Panel Mount Plunger
    SHL-Q55
    SHL-Q55-01

    SHL Dimensions 3

    Please click image to enlarge (open in a new window).

    Panel Mount Roller Plunger
    SHL-Q2255
    SHL-Q2255-01

    SHL Dimensions 4

    Please click image to enlarge (open in a new window).

    Panel Mount Crossroller Plunger
    SHL-Q2155
    SHL-Q2155-01

    SHL Dimensions 5

    Please click image to enlarge (open in a new window).

    Short Hinge Lever
    SHL-W55
    SHL-W55-01

    SHL Dimensions 6

    Please click image to enlarge (open in a new window).

    Hinge Lever
    SHL-W155
    SHL-W155-01

    SHL Dimensions 7

    Please click image to enlarge (open in a new window).

    Short Hinge Roller Lever
    SHL-W255
    SHL-W255-01

    SHL Dimensions 8

    Please click image to enlarge (open in a new window).

    Hinge Roller Lever
    SHL-W2155
    SHL-W2155-01

    SHL Dimensions 9

    Please click image to enlarge (open in a new window).

    One-way Action Short Hinge Roller Lever
    SHL-W355
    SHL-W355-01

    SHL Dimensions 10

    Please click image to enlarge (open in a new window).

    One-way Action Hinge Roller Lever
    SHL-W3155
    SHL-W3155-01

    SHL Dimensions 11

    Please click image to enlarge (open in a new window).

    Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

    MODEL

    STTChi tiếtTiêu đềTải xuống
    1DANH SÁCH MODELSHLItem list of SHL

    TÀI LIỆU

    STTChi tiếtTiêu đềTải xuống
    1TÀI LIỆUSHL

    Đánh giá

    Chưa có đánh giá nào.

    Hãy là người đầu tiên nhận xét “Công tắc hành trình Omron SHL”

    SẢN PHẨM LIÊN QUAN

    Cảm biến quang điện Omron E3C-LD11N

    Liên hệ

    Cảm biến quang điện Omron E3C-LDA7N

    Liên hệ

    Cảm biến quang điện Omron E3C-LDA8N

    Liên hệ

    Bộ truyền thông cảm biến bộ khuếch đại sợi quang E3X-DRT21-S VER.3

    Liên hệ

    Cảm biến quang điện Omron E3AS

    Liên hệ

    Bộ khuếch đại Omron E3C-VM

    Liên hệ

    Cảm biến quang điện Omron E3C-LDA51N

    Liên hệ

    Bộ khuếch đại sợi quang Omron E3NX-MA

    Liên hệ
    xem thêm
    Liên hệ nhanh