Chưa có sản phẩm trong giỏ hàng.
Consult with your OMRON representative when ordering any models that are not listed in this table.
Công tắc cửa an toàn Omron D4BS
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Phím vận hành đặc biệt kích hoạt cơ chế mở trực tiếp để mở các tiếp điểm và tắt các mạch điều khiển khi các cửa bảo vệ được mở trên máy công cụ hoặc thiết bị khác.
• Tuân thủ các tiêu chuẩn EN (TÜV) tương ứng với dấu CE.
• Được chứng nhận bởi tiêu chuẩn UL và CSA.
• Tiếp điểm Công tắc được mở bằng cơ chế mở trực tiếp (chỉ tiếp điểm NC) khi nắp bảo vệ được mở. Cơ chế mở trực tiếp được EN chứng nhận được biểu thị 
trên Công tắc.
• Các trục trặc và vận hành sai được ngăn chặn bằng Phím vận hành đặc biệt.
• Thông số kỹ thuật dải nhiệt độ rộng: −40 đến 80°C.
• Cấp bảo vệ hộp công tắc: IP67 (EN60947-5-1).
Đặc điểm
Switches (Operation Keys are sold separately.)
| Type | Mounting direction | Conduit outlet | 1NC/1NO (Slow-action) | 2NC (Slow-action) | |
|---|---|---|---|---|---|
| 1-conduit type | Front-side mounting |  | Pg13.5 | D4BS-15FS | D4BS-1AFS |
| G1/2 | D4BS-25FS | D4BS-2AFS | |||
| M20 | D4BS-45FS | D4BS-4AFS | |||
Operation Keys
| Type | Model | |
|---|---|---|
| Horizontal mounting |  | D4BS-K1 |
| Vertical mounting |  | D4BS-K2 |
| Adjustable mounting (Horizontal) |  | D4BS-K3 |
Thông số kỹ thuật
Standards and EC Directives
Conforms to the following EC Directives:
・Machinery Directive
・EN50041
・EN ISO 14119
・EN 60204-1
Certified Standards
| Certification body | Standard | File No. |
|---|---|---|
| TÜV Rheinland | EN60947-5-1 (certified direct opening) GS-ET-15 | Consult your OMRON representative for details. |
| UL | UL508 | E76675 |
| CSA | CSA C22.2 No. 14 | LR45746 |
| CQC (CCC) | GB/T 14048.5 | Consult your OMRON representative for details. |
Certified Standard Ratings
TÜV (EN60947-5-1), CCC (GB/T 14048.5)
| Utilization category | AC-15 |
|---|---|
| Rated operating current (Ie) | 0.75 A |
| Rated operating voltage (Ue) | 240 V |
Note: Use a 10 A fuse type a gI or gG that conforms to IEC60269 as a short-circuit protection device.
UL/CSA (UL508, CSA C22.2 No. 14) (A600)
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 120 VAC 240 VAC 480 VAC 600 VAC | 10 A | 60 30 15 12 | 6 3 1.5 1.2 | 7,200 | 720 |
Characteristics
| Interlock type | Type 2 (EN ISO 14119) | |
|---|---|---|
| Coding level | Low level coded (EN ISO 14119) | |
| Degree of protection *1 | IP67 (EN60947-5-1) | |
| Durability *2 | Mechanical | 1,000,000 operations min. |
| Electrical | 500,000 operations min. (10 A resistive load at 250 VAC) | |
| Operating speed | 0.1 m/s to 0.5 m/s | |
| Operating frequency | 30 operations/minute max. | |
| Direct opening force *3 | 19.61 N min. (EN60947-5-1) | |
| Direct opening travel *3 | 20 mm min. (EN60947-5-1) | |
| Contact resistance | 25 mΩ max. | |
| Rated insulation voltage (Ui) | 600 V (EN60947-5-1) | |
| Rated frequency | 50/60 Hz | |
| Protection against electric shock | Class I (with ground terminal) | |
| Pollution degree (operating environment) | 3 (EN60947-5-1) | |
| Impulse withstand voltage (Uimp) (EN60947-5-1) | Between terminals of same polarity | 4 kV |
| Between terminals of different polarity | ||
| Between each terminal and ground | ||
| Insulation resistance | 100 MΩ min. (at 500 VDC) between terminals of same or different polarity, between each terminal and ground, and between each terminal and non-current-carrying metal part | |
| Contact gap | 2 × 2 mm min. | |
| Vibration resistance | Malfunction | 10 to 55 Hz, 0.65 mm single amplitude |
| Shock resistance | Destruction | 1,000 m/s2 min. (IEC68-2-27) |
| Malfunction | 300 m/s2 min. (IEC68-2-27) | |
| Conditional short-circuit current | 100 A (EN60947-5-1) | |
| Conventional enclosed thermal current (Ithe) | 20 A (EN60947-5-1) | |
| Ambient operating temperature | -40 to 80°C (with no icing) | |
| Ambient operating humidity | 95% max. | |
| Weight | Approx. 285 g (D4BS-15FS) | |
Note: The above values are initial values.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust, oil, or water penetration, do not use the D4BS in places where dust, oil, water, or chemicals may
enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. Contact your
OMRON sales representative for more detailed information on other operating environments.
*3. These figures are minimum requirements for safe operation.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust, oil, or water penetration, do not use the D4BS in places where dust, oil, water, or chemicals may
enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. Contact your
OMRON sales representative for more detailed information on other operating environments.
*3. These figures are minimum requirements for safe operation.
Kích thước
(Unit: mm)
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Switches
1-conduit type
D4BS-1[]FS
D4BS-2[]FS
D4BS-4[]FS
Note: There are fluctuations in the contact ON/OFF timing for 2NC contacts. Confirm performance before application.
* Conduit outlet
D4BS-1[]FS :Pg 13.5
D4BS-2[]FS :G1/2
D4BS-4[]FS: M20
* Conduit outlet
D4BS-1[]FS :Pg 13.5
D4BS-2[]FS :G1/2
D4BS-4[]FS: M20
Operation Keys
D4BS-K1
D4BS-K2
D4BS-K3
With Operation Key Inserted
D4BS + D4BS-K1
D4BS + D4BS-K2
D4BS + D4BS-K3
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
*1. The insertion radii apply when the rotational center of the Operation Key in on surface A in the figures.
*2. The insertion radii apply when the rotational center of the Operation Key in on the Operation Key installation surface.
MODEL
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | D4BS | Item list ofD4BS |
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | D4BS |  |
Hãy là người đầu tiên nhận xét “Công tắc cửa an toàn Omron D4BS”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.