Công tắc hành trình Omron D4N-212G

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: CẢM BIẾN AN TOÀN, OMRON, THIẾT BỊ AN TOÀN Từ khóa: cảm biến áp suất, cảm biến omron, cảm biến omron giá rẻ, đèn báo, đèn báo omron, giá rẻ, nút nhấn, nút nhấn omron

• Dòng sản phẩm bao gồm ba mẫu liên kết với các mẫu liên kết 2NC/1NO và 3NC bên cạnh các mẫu liên kết trước đây 1NC/1NO và 2NC.

• Có sẵn các mẫu đầu nối M12, tiết kiệm nhân công và đơn giản hóa việc thay thế.

• Có thể sử dụng với cả tải tiêu chuẩn và vi tải.

• Tuân thủ các yêu cầu đối với các tiếp điểm an toàn trong EN 115-1, EN 81-20 và EN 81-50 (chỉ dành cho các kiểu hành động chậm).

• Chứng nhận tiêu chuẩn: UL, EN (TÜV), CCC

Đặc điểm

Safety Limit Switches (with Direct Opening Mechanism)

Consult with your OMRON representative when ordering any models that are not listed in this table.

Actuator	Conduit size		Built-in switch mechanism
			1NC/1NO (Slow-action)	2NC (Slow-action)	2NC/1NO (Slow-action)	3NC (Slow-action)
			Model	Model	Model	Model
Roller lever (resin lever, resin roller)	1-conduit	Pg13.5	D4N-1A20R	D4N-1B20R	D4N-1C20R	—
		G1/2	D4N-2A20R	D4N-2B20R	D4N-2C20R	—
		M20	D4N-4A20R	D4N-4B20R	D4N-4C20R	D4N-4D20R
		M12 connector	D4N-9A20R	D4N-9B20R	—	—
	2-conduit	G1/2	D4N-6A20R	D4N-6B20R	—	—
	2-conduit	M20	—	D4N-8B20R	D4N-8C20R	—
Adjustable roller lever, form lock (metal lever, resin roller)	1-conduit	Pg13.5	D4N-1A2GR	D4N-1B2GR	D4N-1C2GR	D4N-1D2GR
		G1/2	D4N-2A2GR	D4N-2B2GR	D4N-2C2GR	D4N-2D2GR
		M20	D4N-4A2GR	D4N-4B2GR	D4N-4C2GR	—
		M12 connector	D4N-9A2GR	D4N-9B2GR	—	—
	2-conduit	G1/2	D4N-6A2GR	D4N-6B2GR	—	—
	2-conduit	M20	D4N-8A2GR	D4N-8B2GR	—	—
Adjustable roller lever, form lock (metal lever, rubber roller)	1-conduit	Pg13.5	D4N-1A2HR	—	—	—
		G1/2	D4N-2A2HR	D4N-2B2HR	D4N-2C2HR	D4N-2D2HR
		M20	D4N-4A2HR	D4N-4B2HR	D4N-4C2HR	—
		M12 connector	D4N-9A2HR	—	—	—
	2-conduit	G1/2	D4N-6A2HR	—	—	—
	2-conduit	M20	—	—	D4N-8C2HR	D4N-8D2HR
Plunger	1-conduit	Pg13.5	D4N-1A31R	D4N-1B31R	D4N-1C31R	—
		G1/2	D4N-2A31R	D4N-2B31R	D4N-2C31R	D4N-2D31R
		M20	D4N-4A31R	D4N-4B31R	D4N-4C31R	—
		M12 connector	D4N-9A31R	D4N-9B31R	—	—
	2-conduit	G1/2	D4N-6A31R	D4N-6B31R	—	—
	2-conduit	M20	D4N-8A31R	—	D4N-8C31R	—
Roller plunger	1-conduit	Pg13.5	D4N-1A32R	D4N-1B32R	—	D4N-1D32R
		G1/2	D4N-2A32R	D4N-2B32R	D4N-2C32R	—
		M20	D4N-4A32R	D4N-4B32R	D4N-4C32R	D4N-4D32R
		M12 connector	D4N-9A32R	D4N-9B32R	—	—
	2-conduit	G1/2	D4N-6A32R	D4N-6B32R	D4N-6C32R	—
	2-conduit	M20	D4N-8A32R	D4N-8B32R	D4N-8C32R	—
One-way roller arm lever (horizontal)	1-conduit	Pg13.5	D4N-1A62R	D4N-1B62R	D4N-1C62R	D4N-1D62R
		G1/2	D4N-2A62R	D4N-2B62R	—	—
		M20	D4N-4A62R	D4N-4B62R	D4N-4C62R	D4N-4D62R
		M12 connector	D4N-9A62R	D4N-9B62R	—	—
	2-conduit	G1/2	D4N-6A62R	D4N-6B62R	D4N-6C62R	D4N-6D62R
	2-conduit	M20	D4N-8A62R	—	—	—
One-way roller arm lever (vertical)	1-conduit	Pg13.5	D4N-1A72R	D4N-1B72R	—	—
		G1/2	D4N-2A72R	D4N-2B72R	—	—
		M20	D4N-4A72R	—	D4N-4C72R	—
	2-conduit	G1/2	D4N-6A72R	D4N-6B72R	—	—
	2-conduit	M20	D4N-8A72R	—	—	—

Thông số kỹ thuật

Standards and EC Directives

Conforms to the following EC Directives:

• Machinery Directive
• Low Voltage Directive
• EN50047
• EN60204-1
• EN ISO 14119
• GS-ET-15

Certified Standards

Certification body	Standards	File No.
TÜV SÜD	EN60947-5-1 (certified direct opening)	*1
UL *2	UL508, CSA C22.2 No.14	E76675
CQC (CCC) *3	GB/T14048.5	*1

*1. Consult your OMRON representative for details.
*2. Certification for CSA C22.2 No. 14 is authorized by the UL mark.
*3. Ask your OMRON representative for information on certified models.

Certified Standard Ratings

TÜV (EN60947-5-1), CCC (GB/T14048.5)

Item	AC-15	DC-13
Rated operating current (I_e)	3 A	0.27 A
Rated operating voltage (U_e)	240 V	250 V

Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device. This fuse is not built into the Switch.

UL/CSA (UL508, CSA C22.2 No. 14)

A300

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
120 VAC	10 A	60	6	7,200	720
240 VAC	10 A	30	3	7,200	720

Q300

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
125 VDC	2.5 A	0.55	0.55	69	69
250 VDC	2.5 A	0.27	0.27	69	69

Characteristics

*Degree of protection 1**		IP67 (EN60947-5-1)
*Durability 2**	Mechanical	1,000,000 operations min.
*Durability 2**	Electrical	500,000 operations min. (3 A resistive load at 250 VAC) *3 300,000 operations min. (10 A resistive load at 250 VAC)
Operating speed		1 to 500 mm/s (D4N-1A20R)
Operating frequency		30 operations/minute max.
Contact resistance		25 mΩ max.
*Minimum applicable load 4**		1 mA resistive load at 5 VDC (N-level reference value)
Rated insulation voltage (Ui)		300 V
Rated frequency		50/60 Hz
Protection against electric shock		Class II (double insulation)
Pollution degree (operating environment)		3 (EN60947-5-1)
Impulse withstand voltage (EN60947-5-1)	Between terminals of same polarity	2.5 kV
	Between terminals of different polarity	4 kV
	Between each terminal and non-current carrying metallic parts	6 kV
Insulation resistance		100 MΩ min.
Contact gap		2 × 2 mm min.
Vibration resistance	Malfunction	10 to 55 Hz, 0.75 mm single amplitude
Shock resistance	Destruction	1,000 m/s²
Shock resistance	Malfunction	300 m/s²
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional free air thermal current (Ith)		10 A (EN60947-5-1)
Ambient operating temperature		-30 to 70°C (with no icing)
Ambient operating humidity		95% max.
Weight		Approx. 92 g (D4N-1A20R)

Note: 1. The above values are initial values.
2. Once a contact has been used to switch a standard load, it cannot be used for a load of a smaller capacity.
Doing so may result in roughening of the contact surface and contact reliability may be lost.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust or water penetration, do not use the D4N-[]R in places where foreign material such as dust, dirt,
oil, water, or chemicals may penetrate through the head. Otherwise, accelerated wear, Switch damage or
malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For more details,
consult your OMRON representative.
*3. Do not pass the 3 A, 250 VAC load through more than 2 circuits.
*4. This value will vary with the switching frequency, environment, and reliability level. Confirm that correct operation is
possible with the actual load beforehand.

Kích thước

(Unit: mm)

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Switches

1-conduit Models

Roller Lever (Resin Lever, Resin Roller)
D4N-1[]20R, D4N-2[]20R, D4N-4[]20R, D4N-9[]20R *

Adjustable Roller Lever, Form Lock (with Metal Lever, Resin Roller)
D4N-1[]2GR, D4N-2[]2GR, D4N-4[]2GR, D4N-9[]2GR *

Adjustable Roller Lever, Form Lock (with Metal Lever, Rubber Roller)
D4N-1[]2HR, D4N-2[]2HR, D4N-4[]2HR, D4N-9[]2HR *

1-conduit M12 Connectors
D4N-9[][][]R

* Refer to “1-conduit M12 connectors” for diagram.

Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts.
Check contact operation.
*1. The operating characteristics of these Switches were measured with the roller lever set at 32 mm.
*2. These PT values are possible when the NC contacts are open (OFF).
*3. These PT values are reference values possible when the NO contacts are closed (ON). (1NC/1NO models only)
*4. Reference value.
*5. For safe use, always make sure that the minimum values or greater are provided.

Plunger
D4N-1[]31R, D4N-2[]31R, D4N-4[]31R, D4N-9[]31R *

Roller Plunger
D4N-1[]32R, D4N-2[]32R, D4N-4[]32R, D4N-9[]32R *

One-way Roller Arm Lever (Horizontal)
D4N-1[]62R, D4N-2[]62R, D4N-4[]62R, D4N-9[]62R *

One-way Roller Arm Lever (Vertical)
D4N-1[]72R, D4N-2[]72R, D4N-4[]72R

* Refer to “1-conduit M12 connectors” for diagram.

Note: Variation occurs in the simultaneity of contact opening/closing operations of 2NC, 2NC/1NO, and 3NC contacts.
Check contact operation.
*1. These PT values are possible when the NC contacts are open (OFF).
*2. These PT values are reference values possible when the NO contacts are closed (ON). (1NC/1NO models only)
*3. Reference value.
*4. For safe use, always make sure that the minimum values or greater are provided.