Bộ điều khiển nhiệt độ Hanyoung TD510-10S

– Điều khiển 1,2 kênh
– đa đầu vào (RTD, TC, VDC)
– Chức năng báo động đa dạng
– Tích hợp chức năng giao tiếp (RS485)
– Cấu trúc có thể tháo rời và mở rộng
– Chức năng Digital Recorder (bộ nhớ trong, lưu trữ thẻ SD)
– Đầu vào tiếp điểm (DI) với tối đa 32 tiếp điểm, đầu ra tiếp điểm (DO) với tối đa 32 tiếp điểm
– Màn hình TFT LCD màu với bảng điều khiển cảm ứng (độ phân giải 640 * 480)

· Suffix code

Model	Code				Description
TD51	–				Programmable temperature controller
Display	0				2-channel
	1				1-channel
Display		1			display(5.7″ TFT LCD)
		N			None
Input/output			1		8 input points/6 output points(1 module)+Power module+Control module
			2		8 input points/14 output points(2 modules)+Power module+Control module
			3		16 input points/16 output points(3 modules)+Power module+Control module
			N		No input/output
Language				S	Korean, English, and Chinese(Simplified)
				T	Korean, English, and Chinese(Traditional)

※ This product consists of the display and control(power, control, input, and output modules).

(Up to 32 contact input/output points, respectively)

[Components]

Product	Model	Description
Display	TD510-1N	Display
Control module	TD510-MAIN	Temperature 2-channel control module
	TD510-MAIN	Temperature 1-channel control module
Power module	TM-PWR	Power module
Input module	TM-DI	Module with 16 input points
Output module	TM-DO	Module with 8 output points
Input/output module	TM-DIO	Module with 8 input and 6 output points

· Specification

[Sensor input]

Input type	2 types of thermoresistor (Pt-100, KPt-100), 11 types of thermocouple (K, J, E, T, R, B, S, L, N, U, Wire 5-26) 4 types of DC voltage (-10 – 20 mV, 0 – 100 mV, 1 – 5 V, 0 – 30 V)
Sampling cycle	250 ms
Measured current of thermoresistor(RTD)	Approx. 0.21 mA
Input resistance	Thermocouple : 1 ㏁ or more; DC voltage : 1 ㏁ or more
Allowable wire resistance	Thermoresistor : Max. 100 Ω/wire (For RTD between -100.00 and 150.00, max. 10 Ω/wire) Thermocouple : 200 Ω or less DC voltage : 2 ㏀ or less
Influence of wire resistance	Thermoresistor : ±0.3 ℃/10 Ω (3 wires must have the same wire resistance)
Allowable input voltage	Thermocouple : ±10 V d.c. or less, DC voltage : ±33 V d.c. or less
Error of reference junction contact(RJC) temperature	±1.5 ℃ (0 ~ 50 ℃)
Detection of sensor disconnection(Burn-out)	UP-Scale for disconnection

[Performance]

Display accuracy	RTD, DC voltage : ±0.1 % of FS ±1 Digit TC : ±0.15 % of FS ±1 Digit (Exclude RJC temperature error), Refer to input table for details
Insulation Resistance	20 ㏁ or 500 V dc between power supply terminal and FG terminal.
Internal voltage	Between 1st and 2nd terminals : Min. 1500 V a.c for 1 min Between 1st and FG terminals : Min. 1500 V a.c for 1 min Between 2nd and FG terminals : Min. 1500 V a.c for 1 min 1st terminal : Power terminal (except FG terminal) and relay output terminal 2nd terminal : Sensor input terminal, contact input terminal, communication terminal

[General Specifications]

Power voltage	100 – 240 V a.c.
Voltage fluctuation rate	± 10% of supply voltage
Power Consumption	30 VA max
Ambient temperature	0 ~ 50 ℃
Ambient humidity	20 ~ 90 % RH (However, no condensation )
Storage temperature	-25℃ ~ 70℃
Internal vibration	10 – 55 Hz, amplitude 0.75 mm, 4 directions in 3 directions, 5 minutes / cycle
Internal shock	147 m/s², 3 times in 3 directions
Dimensions	display : 145(W) X 145(H) X 42.3(D), Power module : 50(W) X 107(H) X 112(D) Control module : 40(W) X 107(H) X 112(D)
weight	132 Kg

 

[Control function]

Input	Input calibration(Sensor bias)	EUS (0 ~ 100%)
	Scaling(Scaling)	DC voltage(VDC) : Input scaling according to conversion range
	Input filter(LPF)	0 – 120 S
Control output	control output	Simultaneous heating and cooling control Voltage output (SSR) or current output (4 – 20 ㎃ d.c), relay output selection
Control operation	operating mode	Program control, device control selection
	Pattern	100 patterns(1 pattern/100 segments)
	Segment	2000 segments
	PID group	4 groups per channel (Level PID)
	Auto tuning	Auto tuning according to target setting value
	Proportional band	0.00 – 100.00 % (For 0.00 %, ON/OFF control)
	Integral time	0.0 – 3,000 S (OFF when 0 S)
	Derivative time
	ON/OFF control	Set 0.0 to proportional band(PB)
	Normal Open/Normal Close	According to selection of Normal Open/Normal Close for control output
	Control mode	Heating Control / Cooling Control
	Control method	Channel unused, simultaneous channel operation, individual channel operation selection
	Hysteresis	EUS (0 ~ 100 %)
Transmission output	Temperatre(Ch.1 and 2)	4 – 20 mA d.c. Specific value(PV), Setting value(SV) and Output(MV)
	Scaling	Auto scaling for defined upper/lower limit range(4 – 20 mA d.c.)
Alarm setting	Alarm setting	System alarm : 8 points Assign 4 of 8 pattern alarms to a pattern
	Alarm type	Absolute upper/lower limit, Offset upper/lower limit, and Within/Out of range
	Absolute alarm setting range	EU (0 ~ 100 %)
	Offset information setting range	EUS (-100 ~ 100 %)
	Hysteresis	EUS (0 ~ 100 %)
Memory specifications	Internal memory	Non-volatile memory : 80 MB – Saving of 15 days at 1 S interval
	External memory	SD card(4 GB) : Saving of 2 year at 1 S interval
	Saving interval	1 ~ 360
	Memory information	Program information, setting value, recovery, and temperature setting/specific/output value

[Display specifications]

Display	TFT color LCD (115.2 X 86.4 mm : 5.7″)
Number of Pixels	640 X 480 Pixel
Back light	LED Back light
Life cycle of back light	Approx. 40,000 h
Touch type	Resistive type (4 Wires)
Language	Korean/English/Chinese(Simplified)

[Output specifications]

Contact output(DO)	Up to 32 relay	A Contact	30 V d.c. 3 A max, 250 V a.c. 3 A
		B Contact	NO : 30 V d.c. 5 A max. 250 V a.c. 5 A
Control output	SSR output	ON : 18 V d.c. Pulse voltage(800 Ω or more load resistance)
	SCR output	4 – 20 mA d.c. (600 Ω or less load resistance)
	Relay output	30V d.c. 3A max, 250V a.c. 3A
Transmission output	Current output	4 – 20 ㎃ d.c
	Load resistance	600 Ω or less load resistance
	Output limit	-5.00 ~ 105.00 %
	Output type	Specific value(PV), Setting value(SV), Output(MV), and random
	Refresh interval	250 ㎳

[Contact input]

Max. number of input	32 points
Input type	No-voltage contact input
Operational conditions	During operation/Always

[Communication specifications]

Applied standard	RS485
Max. connection number	1:32 (address 1 – 99)
Communication type	2-wire
Synchronization	Asynchronous
Communication distance	Approx. 1.2 km or less
Communication speed	9600, 19200, 38400, 57600, 115200 bps
Data Length	7/8 Bits
Parity Bit	NONE / EVEN / ODD
Stop Bit	1 / 2 Bit(s)
Protocol	PC-Link / PC-link + SUM / MODBUS ASC / MODBUS RTU
Response Time	0 ~ 100 ㎳

[Range configuration by input type ]

Input type			Measuring range (℃)	Level
Thermoresistor (RTD)	Pt100 Ω	Pt-1	-200.0 ~ 640.0	±0.1 % of FS ±1 Digit
	KPt100 Ω	KPt-1	-200.0 ~ 500.0
Thermocouple (TC)	K	K-0	-200 ~ 1370	±0.15 % of FS ±1 digit
		K-1	-200.0 ~ 1370.0	±0.15 % of FS ±1 digit(*2)
	J		-200.0 ~ 1200.0	±0.15 % of FS ±1 digit(*2)
	E		-200.0 ~ 1000.0	±0.15 % of FS ±1 digit(*2)
	T		-200.0 ~ 400.0	±0.15 % of FS ±1 digit(*3)
	R		0.0 ~ 1700.0	±0.15 % of FS ±1 digit(*4)
	B		0.0 ~ 1800.0	±0.15 % of FS ±1 digit(*1)
	S		0.0 ~ 1700.0	±0.15 % of FS ±1 digit(*4)
	L		-200.0 ~ 900.0	±0.15 % of FS ±1 digit(*2)
	N		-200.0 ~ 1300.0	±0.15 % of FS ±1 digit(*3)
	U		-200.0 ~ 400.0	±0.15 % of FS ±1 digit(*3)
	Wre 5-26		0.0 ~ 2300.0	±0.15 % of FS ±1 digit(*4)
	PL-II		0.0~1390.0	±0.15 % of FS ±1 digit
DC voltage (VDC)	-10 – 20 mV		-10.00 ~ 20.00	±0.1 % of FS ±1 Digit
	0 – 100 mV		0.00 ~ 100.00
	1 – 5 V		1.00 ~ 5.00
	0 – 30 V		0.00 ~ 30.00

(*1) 0 ~ 400 ℃ : ±5 % of FS ±1 digit

(*2) -200 ~ -150 ℃ : ±0.2 % of FS ±1 digit

(*3) -200 ~ -150 ℃ : ±0.4 % of FS ±1 digit, -150 ~ -100 ℃ : ±0.2 % of FS ±1 digit

(*4) 0 ~ 200 ℃ : ±0.2 % of FS ±1 digit