Cảm biến Hanyoung UP8RM-1.5N

– Ứng dụng IC độc quyền cho C-MOS
– Dải điện áp nguồn rộng (5-35 V DC : Loại DC 3 dây)
– Mạch tăng cường tiếng ồn bên trong
– Áp dụng loại 2 dây gần nhau không phân cực

· Suffix code

Model	Code						Information
UP		–					inductive type proximity sensor
Sensing area size	8						M8
	12						M12
	18						M18
	30						M30
Structure type		RM					Round type Shield
		RD					Round type None Shield
		RLM					Long round type shield(M8 and M12 are excluded)
		RLD					Long round type None shield (M8 and M12 are excluded)
Sensing Distance			1.5				Only for UP8-RM1.5
			2				Only for UP8-RD2, UP12-RM2
			4				Only for UP12-RD4
			5				Only for UP18-RM5, UP18-RLM5
			8				Only for UP18-RD, UP18-RLD
			10				Only for UP30-RM10, UP30-RLM10
			15				Only for UP30-RD15, UP30-RLD15
Power and Output type				N			D.C NPN output
				P			D.C PNP output
				A			A.C 2 wire type
				T			D.C 2 wire type(Polarity)
				U			D.C 2 wire type(No polarity) ※ But M8 is excluded
Output state					A		Normal open(N.O)
					C		Normal close(N.C)
Connection structure						*	No indication (Cable type)
						CR	Relay connector type
						C	Connector type

· Specification

Inductive D.C 3 Wire type

Model	NPN	UP8RM-1.5N	UP8RD-2N	UP12RM-2N	UP12RD-4N	UP18RM-5N	UP18RD-8N
	PNP	UP8RM-1.5P	UP8RD-2P	UP12RM-2P	UP12RD-4P	UP18RM-5P	UP18RD-8P
	Size	M8		M12		M18
Shield		Shield	None shield	Shield	None shield	Shield	None shield
Standard sensing object (mm)		Iron 8 X 8 X 1		Iron 12 X 12 X 1		Iron 18X18X1	Iron 25 X 25 X 1
Sensing distance		1.5 mm	2 mm	2 mm	4 mm	5 mm	8 mm
Setting distance		0 ~ 1.2 mm	0 ~ 1.6 mm	0 ~ 1.6 mm	0 ~ 3.2 mm	0 ~ 4 mm	0 ~ 6.4 mm
Hysteresis		Less than 10% of sensing distance
Response frequency		800 Hz		800 Hz	400 Hz	350 Hz	200 Hz
Power supply voltage		12 ~ 24 V d.c (Usable voltage range 5 – 35V d.c)
Control output		Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage : Max 1.5 V
Current consumption		Max 6 mA
Operation indication		Red LED
Protective circuit		Power reversely comeded prodective circuit, surge prote ctive circuit and over current protective circuit are built in.
connection structure		Cable type (standard cable length 2m), Relay connector type, Connector type
Material		Case: stainless, Sensing surface: PBT, Cable holder: Polyester elastomer		Case: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer
Weight	Cable type	approx. 60g	approx. 60g	approx. 70g	approx. 70g	approx. 120g	approx. 120g
	Relay connector type	None	None	approx. 30g	approx. 30g	approx. 80g	approx. 80g
	Connector type	None	None	approx. 30g	approx. 30g	approx. 60g	approx. 60g

Inductive D.C 3 Wire type

Model	NPN	UP18RLM-5N	UP18RLD-8N	UP30RM-10N	UP30RD-15N	UP30RLM-10N	UP30RLD-15N
	PNP	UP18RLM-5P	UP18RLD-8P	UP30RM-10P	UP30RD-15P	UP30RLM-10P	UP30RLD-15P
	Size	M18		M30		M30
Shield		Shield	None shield	Shield	None shield	Shield	None shield
Standard sensing object (mm)		Iron 18 X 18 X 1	Iron 25 X 25 X 1	Iron 30 X 30 X 1	Iron 45 X 45 X 1	Iron 30 X 30 X 1	Iron 45 X 45 X 1
Sensing distance		5 mm	8 mm	10 mm	15 mm	10 mm	15 mm
Setting distance		0 ~ 4 mm	0 ~ 6.4 mm	0 ~ 8 mm	0 ~ 12 mm	0 ~ 8 mm	0 ~ 12 mm
Hysteresis		Less than 10% of sensing distance
Response frequency		350 Hz	200 Hz	250 Hz	100 Hz	250 Hz	100 Hz
Power supply voltage		12 ~ 24 V d.c (Usable voltage range 5 – 35V d.c)
Control output		Open/Close capacitance : 200 mA Max. (Resistive load), Residual : Max1.5 V
Current consumption		Max 6 mA
Operation indication		Red LED
Protective circuit		Power reversely connected protective circuit, Surge protective circuit and over current protective circuit are bult in.
connection structure		Cable type (standard cable length 2m), Relay connector type, Connector type
Material		Case : brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer
Weight	Cable type	approx. 140g	approx. 140g	approx. 170g	approx. 170g	approx. 220g	approx. 220g
	Relay connector type	approx. 100g	approx. 100g	approx. 130g	approx. 130g	approx. 180g	approx. 180g
	Connector type	approx. 80g	approx. 80g	approx. 150g	approx. 150g	approx. 200g	approx. 200g

Inductive D.C 2 wire type (Polrity/No polarity)

Model	Polarity	UP8RM-1.5T	UP8RD-2T	UP12RM-2T	UP12RD-4T	UP18RM-5T	UP-18RD-8T
	Non Polarity	–	–	UP12RM-2U	UP12RD-4U	UP18RM-5U	UP-18RD-8U
	Size	M8		M12		M18
Shield		Shield	None shield	Shield	None shield	Shield	None shield
Standard sensing object (mm)		Iron 8 X 8 X 1		Iron 12 X 12 X 1		Iron 18X18X1	Iron 25X25X1
Sensing distance		1.5 mm	2 mm	2 mm	4 mm	5 mm	8 mm
Setting distance		0 ~ 1.2 mm	0 ~ 1.6 mm	0 ~ 1.6 mm	0 ~ 3.2 mm	0 ~ 4 mm	0 ~ 6.4 mm
Hysteresis		Less than 10% of sensing distance
Response frequency		800 Hz		800 Hz	400 Hz	350 Hz	200 Hz
Power supply voltage		12 ~ 24 V d.c (Usable voltage range 10 – 30 V d.c)
Control output		Open/Close capacitance : 100 mA Max.(Resistive load), Residual voltage: T (polarty) : max 3.5 V, U (No polarity): max5V
Leakage current		Max 1 mA
Operation indication		Red LED
Protective circuit		Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built in.
connection structure		Cable type(standard cable length 2 m), Relay connector type, Connector type
Material		Case: stainless, Sensing surface:PBT, Cable holder: Polyester elastomerr		Case: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer
Weight	Cable type	approx. 60g		approx. 70g		approx. 120g	approx. 120g
	Relay connector type	None		approx. 30g		approx. 80g	approx. 80g
	Connector type	None		approx. 30g		approx. 60g	approx. 60g

Inductive D.C 2 wire type

Model	Polarity	UP18RLM-5T	UP18RLD-8T	UP30RM-10T	UP30RD-15T	UP30RLM-10T	UP30RLD-15T
	Non Polarity	UP18RLM-5U	UP18RLD-8U	UP30RM-10U	UP30RD-15U	UP30RLM-10U	UP30RLD-15U
	Size	M18		M30		M30
Shield		Shield	None shield	Shield	None shield	Shield	None shield
Standard sensing object (mm)		iron 18 X 18 X 1	iron 25 X 25 X 1	iron 30 X 30 X 1	iron 45 X 45 X 1	iron 30 X 30 X 1	iron 45 X 45 X 1
Sensing distance		5 mm	8 mm	10 mm	15 mm	10 mm	15 mm
Setting distance		0 ~ 4 mm	0 ~ 6.4 mm	0 ~ 8 mm	0 ~ 12 mm	0 ~ 8 mm	0 ~ 12 mm
Hysteresis		Less than 10% of sensing distance
Response frequency		350 Hz	200 Hz	250 Hz	100 Hz	250 Hz	100 Hz
Power supply voltage		12 ~ 24 V d.c (Usable voltage range 10 – 30 V d.c)
Control output		Open/Close capacitance : 100 mA Max. (Resistive load), Residual voltage: T(Polarity) : max 3.5 V, U(No polarity) :max 5 V
Leakage current		Max 1 mA
Operation indication		Red LED
Protective circuit		Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built in.
connection structure		Cable type(standard cable length2 m), Relay connector type, Connector type
Material		Case: brass(chrome plating), Sensing surface: PBT, Cable holder : Polyester elastomer
Weight	Cable type	approx. 140g	approx. 140g	approx. 170g		approx. 220g
	Relay connector type	approx. 100g	approx. 100g	approx. 130g		approx. 180g
	Connector type	approx. 80g	approx. 80g	approx.110g		approx. 200g

Inductive A.C 2 wire type

Model	For A.C	UP12RM-2A	UP12RD-4A	UP18RM-5A	UP18RD-8A	UP18RLM-5A
	Size	M12		M18		M18
Shield		Shield	None shield	Shield	None shield	Shield
Standard sensing object (mm)		Iron 12 x 12 x 1 mm		Iron 18 x 18 x 1 mm	Iron 25 x 25 x 1 mm	Iron 18 x 18 x 1 mm
Sensing distance		2 mm	4 mm	5 mm	8 mm	5 mm
Setting distance		0 ~ 1.6 mm	0 ~ 3.2 mm	0 ~ 4.0 mm	0 ~ 6.4 mm	0 ~ 4.0 mm
Hysteresis		Less than 10% of sensing distance
Response frequency		20 Hz
Power supply voltage		100 ~ 240 V a.c(Usable voltage range 90 – 250 V a.c)
Control output		Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V
Leakage current		Max 2.2 mA
Operation indication		Red LED
Protective circuit		Surge Protective circuit built in.
connection structure		Cable type(standard cable length 2 m), Relay connector type, Connector type
Material		Case: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer
Weight	Cable type	approx. 70g	approx. 70g	approx. 120g		approx. 140g
	Relay connector type	approx. 30g	approx. 30g	approx. 80g		approx. 100g
	Connector type	approx. 30g	approx. 30g	approx. 60g		approx. 80g

Inductive A.C 2 wire type

Model	For A.C	UP18RLD-8A	UP30RM-10A	UP30RD-15A	UP30RLM-10A	UP30RLD-15A
	Size	M18	M30		M30
Shield		None shield	Shield	None shield	Shield	None shield
Standard sensing object (mm)		Iron 25 x 25 x 1 mm	Iron 30 x 30 x 1 mm	Iron 45 x 45 x 1 mm	Iron 30 x 30 x 1 mm	Iron 45 x 45 x 1 mm
Sensing distance		8 mm	10 mm	15 mm	10 mm	15 mm
Setting distance		0 ~ 6.4 mm	0 ~ 8.0 mm	0 ~ 12.0 mm	0 ~ 8.0 mm	0 ~ 12.0 mm
Hysteresis		Less than 10% of sensing distance
Response frequency		20 Hz
Power supply voltage		100 ~ 240 V a.c(Usable voltage range 90 – 250 V a.c)
Control output		Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V
Leakage current		Max 2.2 mA
Operation indication		Red LED
Protective circuit		Surge Protective circuit built in.
connection structure		Cable type(standard cable length 2 m), Relay connector type, Connector type
Material		Case: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer
Weight	Cable type	approx. 140g	approx. 170g	approx. 170g	approx. 220g	approx. 220g
	Relay connector type	approx. 100g	approx. 130g	approx. 130g	approx. 180g	approx. 180g
	Connector type	approx. 80g	approx. 150g	approx. 150g	approx. 200g	approx. 200g