Bộ đếm/ Hẹn giờ Hanyoung GF-T41N

GF4-P40N

GF4-P41N

GF4-P41S

GF4-T40N

GF4-T41N

GF4-T41S

– Bộ đếm / Hẹn giờ
– Thiết lập chữ số của dấu thập phân
– Lựa chọn đầu vào điện áp / không điện áp
– Phạm vi hẹn giờ 16 loại (10/60hexadecimal chữ số mỗi 8 loại)

· Suffix code

Model	Code				Information
GF4-					Digital counter / Timer (48 X 48 ㎜)
Type	P				Pre-set counter
	T				Total counter
Displayable digits		4			4 digits (9999)
Setting stage			0		None (total counter)
			1		1st stage setting (Preset counter)
Terminal structure				N	Terminal
				S	8 pin structure (suitable for 8 pin socket)

Model	Code				Information
GF7-					digital counter / Timer (72 X 72 ㎜)
Type	P				Pre-set counter
	T				Total counter (6 digits only)
Displayable digits		4			4 digits (9999)
		6			6 digits (999999)
Setting stage			1		1st stage setting
			2		2nd stage setting
			0		Total counter
Pre-scale function				E	Pre-scale function built in (Preset counter)
				N	No Pre-scale (Total counter)

· Specification

Model		GF4-P	GF4-T
Appearance(mm)
In Timer function	Repeat accuracy	±0.01 % ± 0.05 % second Max. (Power supply start) ± 0.005 % ± 0.003 % second Max. (Reset start) Ratio to set value
	Variation due to voltage change
	Variation due to temperature change
Insulation resistance		100 MΩ Min. (at 500 V d.c) (between current – carrying terminal and exposed noncurrent – carrying metal parts, between power supply circuit and control output circuit)
Dielectric strength		2,000 V a.c 50 / 60 Hz for 1 minute (between current – carrying terminal and exposed noncurrent – carrying metal parts, between power supply circuit and control output circuit)
Noise immunity		Square wave noise by simulator AC : ± 2 kV (between power supply terminal board) ± 500 V (between input terminal)
Vibration		Mechanical durability : 10 to 55 Hz : 0.75 mm double amplitude Malfunction durability : 10 to 55 Hz : 0.5 mm double amplitude
Shock		Mechanical durability : 300 m/s² (approx. 30 G) Malfunction durability : 100 m/s² (approx. 10 G)
Life expectancy		Mechanical : 10,000,000 operations Min. Electrical : 100,000 operations Min. (250 V a.c 3 A)
Weight		GF4 – P : 184 gms, GF4 – T : 168 gms (with adaptor), GF4 – P41S : 100 gms
Power supply		100 – 240 V a.c 50 – 60 Hz
Power consumption		GF4 – T : 4.8 V A, GF4 – P : 6.2 V A (240 V a.c 60 Hz)
Reset / Inhibit		Reset by power OFF : Min. power OFF time : 0.5 s External reset or inhibit : Min. reset input signal width : 0.02 s
Control output		SPDT : 250 V a.c 3 A cosØ = 1(resistive load) Open collector : 30 V d.c Max. 100 mA Max.
Ambient temperature		Operating : -10 °C to 55 °C
Humidity		35 to 85 % R.H.

Model		GF7-P	GF7-T
Appearance(mm)
		72(W) x 72(H) x 127.5(D) mm
Sort		Freeset	Display
Display method		7 Segment LED , LED Height : 10mm
Stage of freeset		1 stage, 2stage	–
Display digit		4 digits, 6digits	6digits
Max. Counting speed		30 / 1K / 3K / 5Kcps
Counting input		contact, Non – contact
Reset		External reset : Min. input signal width 0.02sec(contact, Non-contact input ) Power reset : Min. power opening time 0.5sec
Inhibit input		Voltage input ( d.c input ) [H] level 5 ~ 30 V d.c, [L] level 0 ~ 2 V d.c ( input resistance Approx. 4.7 kΩ)
Memory protection		Semi-permanent
Power voltage		100 ~ 240V a.c ( 50 / 60Hz )
Power consumption		Approx. 5V A ( 220V a.c 60Hz )
Sensor voltage		12V d.c 50mA Max
Control output		Contact output : 1c 250V a.c 3 A / Non – contact output : 30V d.c, 100mA Max
Insulation resistance		Min, M廓 ( At 500V d.c ) part of conduction terminal and exposured non-electrify metal part
Dielectric strength		2000V a.c50 / 60Hz for 1minute ( Between + and – charging terminals )
Vibration	Malfunction	2 – 55Hz, X, Y, Z, Each direction for 10 minutes
	Durability	10 – 55Hz, 0.76mm, X, Y, Z Each direction for 2 hours
Shock	Malfunction	100 m/s² 6 positions, Each 3 times
	Durability	300 m/s² 6 positions, Each 3 times
Life	Mechanical	10 millions operations Min ( Relay type )
	Electrical	0.3 million operation Min. ( Relay type )
Ambient temperature and humidity		0 ~ 50 °C(32 ~ 122 °F)ㆍ35 ~ 80 % R.H. (No icing)