Bộ điều khiển nhiệt độ Hanyoung TD500-21

TD300 Programmable Temperature Controller

– Màn hình LCD màu với bảng điều khiển cảm ứng
– Điều khiển 2 kênh
– Lên tới 100 mẫu, 100 phân đoạn/mẫu (tổng cộng 2.400 phân đoạn)
– Điều khiển PID
– Chức năng cảnh báo đa dạng (đầu ra: 4 tiếp điểm, hoạt động: 20 loại)
– 8 tiếp điểm ngõ vào số (DI), 8 tiếp điểm ngõ ra số (DO)
– Chức năng giao tiếp (RS485 hoặc RS232, tùy thuộc vào mã hậu tố)
– Lưu trữ dữ liệu và sao lưu thông số qua thẻ SD

· Suffix code

MODEL	CODE		DESCRIPTION
TD300-			2 CHANNLE PROGRAMMABLE TEMPERATURE CONTROLLER 96(W)×96(H)×100(D)
Communication	1		RS485/422
	2		RS232C
language		1	Korean / English (Standard)
		2	English / Chinese (Simplified)

· Specification

[ Input Specification ]

Input (2 channels)	Pt100 (IEC751)	-200.0 ~ 640.0 ℃, ± 0.1 % of F.S
	TC_K	-200.0 ~ 1370.0 ℃, ± 0.1 % of F.S
	TC_J	-200.0 ~ 1200.0 ℃, ± 0.1 % of F.S
	TC_E	-200.0 ~ 1000.0 ℃, ± 0.1 % of F.S
	TC_T	-200.0 ~ 400.0 ℃, ± 0.1 % of F.S
	TC_R	0 ~ 1700.0 ℃, ± 0.1 % of F.S
	TC_S	0 ~ 1700.0 ℃, ± 0.1 % of F.S
	mV	0 ~ 100 mV or -10 ~ 20 mV (-999.9 ~ 9999.9), ± 0.1 % of F.S
	V DC	0 – 10 V (Signal Input Range setup is available, -999.9 ~ 9999.9), ±0.1 % of FS
	4 – 20 mA	Use 250 Ω external resistance, V DC Use after setup of V DC 1 – 5 V
Input Resolution		24 bit
Accuracy of indication		0.1 %
Sampling cycle		500 msec
Input Resistance		More than 1 ㏁
Maximum allowable resistance of line		Less than 50 Ω / Line (Resistance of lines is a same condition)
RJC		±1.5 ℃

[ Output Specification ]

Control Output (2 channels)	SCR	4 – 20 mA DC(Resistive load : less than 600 Ω) Output Resolution : 16 bit Accuracy of Output : ±0.1 % of FS Output Ripple : 0.2 % of FS
	SSR	24 V DC Pulse (Resistive load : More than 600Ω) Min. Pulse Range : 10 ms Cycle Time : Available to select 1 – 1000 s
	Relay Output	Kind of Internal Relay : N/O -> 250 V AC 5 A / 30 V DC 5 A
Transmission Output (4 – 20 mA)		Avaliable to select PV/SV/H.MV/C.MV of each channel Output Accuracy : ±0.1 % of FS In case of heating/cooling control, if control output of heating is SCR or SSR, this channel can not use transmission output.
Transmission Output Period of outputrenewal		Each channel 500 ms

[ Functions ]

Screen	3.5” TFT-LCD
Pattern	Max 100 , Available to operate each channel’s pattern
Segment	Max 2,400 ( Max 100 per segment)
Waiting Mode	Setup per pattern and setup of using or not using per segment
Repetition & Connection	Available to use Pattern Repetition and Section Repeat Loof Setup (Max. 20) Free connecting operation among patterns is available
PID Group	Each channel 4 Zones, Selectable between manual or automatic
Control Method	Heating control or Heating/Cooling control in each channel. PID or ON/OFF control
Auto Tuning	Optimal PID GAIN is automatically calculated according to Set Value. It could be operated by each channel
Proportional Band	0.0 ~ 1000.0 ℃ ( If “0” = On/Off control, Not “0” = PID control)
Integral Time	0 ~ 6000 sec ( “0” = No Integral Calculation)
Differential Time	0 ~ 6000 sec ( “0” = No Differential Calculation)
ON/OFF control	Available to select Dead zone 0.1 ~ 1000.0 ℃
Event Log	Max 40 Event Logs could be saved depend on various situations
LCD protection	Back light will be off according to designated time of not using touch panel
Password	Password is available to prevent other people from changing system setup
Protection of Over-Integral and Differential	ARW Zone setup ( 50 ~ 200 % of proportional band)
Fuzzy Function	Control overshoot
RAMP	Available to select SV changing ratio in case of fixing operation
Restrict MV changing ratio	Function to control sudden change of MV
Alarm Setup	4 points, High, Low, Deviation etc. 20 kinds
Inner Signal	8 points, object, range and delayed time setup are available
Time Signal	8 points when program mode operation
Graph Function	PV, SV of each channel could be display by graph
Fixing Operation Hour	Available to set fixing operation hour up
Reservation Operation Fuction	Available to use reservation operation time by using built in timer.
User Logo Display	User logo could be shown for 3 sec after power on. Download through communication port
Screen Capture	Upload is available through communication port
Language	Korean and English (Or Chinese / English optional)
Contact Input	RUN/STOP, STEP, HOLD and Error Input (Stop operation, Delayed/ setup is available)
Contact Output	Output of various signals
Storage in Power Failure	Various setting and operation information memory
Blackout return	STOP / COLD / HOT return when power failure is restored

[ Communication ]

Applied Standard	EIA-RS232C, EIA-RS422/485, USB
Max.Connection Number	RS232	1 : 1
	RS422 / 485	1 : 256
Communication Method	RS232	Full Duplex
	RS422 / 485	4 wired Half Duple, 2 wired Half Duplex
Synchronous Method	RS232 RS422 / 485	asynchronous
Communication Distance	RS232	Within approximately 10 m
	RS422 / 485	Within approximately 1.2 Km
Communication Speed	RS232 RS422 / 485	2400 ~ 115200 bps
Length of Data	RS232 RS422 / 485	PCLINK : 8 bit / Modbus-ASCII : 7 bit
Parity Bit	RS232 RS422 / 485	PCLINK : NONE / Modbus-ASCII : EVEN
Stop Bit	RS232 RS422 / 485	1 bit
Communication Protocol	RS232 RS422 / 485	PCLINK, Modbus-ASCII
Delayed Response Time	RS232 RS422/485	1 + (0 ~ 250) ㎳

[ Ratings ]

Rated Voltage	100 – 240 V AC, Valiable Voltage Ratio : ±10 %
Frequecy	50 – 60 Hz
Power Consumption	Max. 10 W
Insulation resistance	Between 1st & 2nd Terminal 1st/2nd and Earth Terminal	More than 20 ㏁ /500 V DC
Dielectric strength	Between 1st & 2nd Terminal 1st/2nd and Earth Terminal	2500 V ac, 50 / 60 Hz, 1 분간
Power output	24 V d.c, 1A Max. (TD500 only)

[Operation Environment]

Installation	Continuous Vibration	Vibration Wide : Bleow 1.2 mm (5 – 14 Hz) Below 4.9 ㎧ (4 – 150 Hz)
	Short time Vibration	Below 14.7 ㎧ 15 sec(Each 3 directions)
	Shock	Below 147 ㎧ 11 msec (Each 6 directions, 3 times)
Normal Operation Condition	Surrounding Temperature	0 ~ 50 ℃
	Surrounding Humidity	20 ~ 90 % RH (No Condensation)
	Magnetic Effect	Less than 400 AT/m
	Preheating	More than 10 minute
Effectof surrounding temperature	Voltage/TC Input	± 1 uV / ℃ or ± 0.01 % of F.S / ℃
	RTD Input	Less than ±0.05 ℃ / ℃
	Analog Output	Less than ±0.05 % of FS / ℃

[Condition of Transport and Storage]

Temperature	-25 ~ 70 ℃
Humidity	5 ~ 95 % RH (No condensation)
Shock	Less than 1 m when dropping the packed product