Chưa có sản phẩm trong giỏ hàng.
Chỉ cần quan sát các chỉ báo trên và dưới sáng lên khi điều chỉnh hoàn tất.
Có thể sử dụng con trỏ laser và đèn tùy chọn để giảm thời gian cần thiết để thiết lập màn chắn sáng.
Cảm biến an toàn Omron F3SG-RA-02TS
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
[Cài đặt nhanh chóng và dễ dàng] Thiết kế trực quan và thông minh giúp thiết lập nhanh chóng
Điều chỉnh chùm tia đơn giản
Dấu ngoặc vuông
Bốn loại giá đỡ cung cấp khả năng điều chỉnh theo chiều dọc hoặc chiều dọc và chiều ngang ngay cả sau khi lắp, giúp điều chỉnh chùm sáng dễ dàng hơn.
Đồng bộ quang học – Không cần đường đồng bộ
Đồng bộ hóa quang loại bỏ nhu cầu đi dây để đồng bộ hóa giữa bộ phát và bộ thu.
Kết quả là hệ thống dây linh hoạt làm giảm rủi ro ngắt kết nối và tránh các nguồn tiếng ồn.
đồng bộ hóa quang học
Kết nối cáp Smartclick để thiết lập nhanh
Không cần điều khiển mô-men xoắn:
đầu nối Smartclick kết nối cáp chỉ với một vòng 1/8 đầu nối chống nước M12.
* Smartclick là nhãn hiệu đã đăng ký của Tập đoàn OMRON.
Đi dây đơn giản nhờ giảm đầu nối dây
Hệ thống dây điện đơn giản giúp cài đặt nhanh hơn.
Ít dây cáp hơn giúp giảm nguy cơ ngắt kết nối và rắc rối về tiếng ồn.
[Vận hành ổn định và bảo trì dự đoán] Trực quan hóa giúp loại bỏ thời gian ngừng hoạt động của máy
Đèn thông báo cường độ ánh sáng thấp
Đèn thông báo khi độ sáng tới giảm do bụi bẩn, mp hich tránh dừng đột ngột.
Ghi nhật ký dữ liệu để khắc phục sự cố nhanh chóng
Có thể tải nhật ký lỗi được lưu trữ trong F3SG-RA xuống PC được kết nối với F3SG-RA bằng bộ giao diện chuyên dụng. Công cụ cấu hình SD Manager2 có thể được sử dụng để phân tích lỗi nhằm xác định nguyên nhân và giải pháp. Dữ liệu về cường độ ánh sáng, thời gian BẬT nguồn và tần số chuyển đổi cũng có thể được thu thập thường xuyên để bảo trì dự đoán.
Bluetooth® cho phép kiểm tra trạng thái mà không cần dừng đường dây
SD Manager2 có thể được sử dụng để kiểm tra không dây trạng thái của màn chắn sáng an toàn sau khi ghép nối màn chắn sáng an toàn với PC qua Bluetooth®, giúp giảm thời gian bảo trì.
Kết nối không dây
– Giám sát trong quá trình vận hành
– Không có khả năng chặn tia
– Không cần thao tác sau khi hoàn thành kiểm tra
– Giám sát từ mọi nơi
– Số sê-ri để chọn rèm chắn sáng an toàn phù hợp trong số nhiều lắp đặt trên dây chuyền
[Dành cho sử dụng toàn cầu] Dễ dàng triển khai trên toàn thế giới
Lựa chọn PNP/NPN
F3SG-RA được thiết kế để sử dụng trong nhiều môi trường khác nhau trên khắp thế giới, phù hợp với các tiêu chuẩn quốc tế.
Sản xuất và giao hàng toàn cầu
Omron đã tăng cường các cơ sở sản xuất toàn cầu và các dịch vụ địa phương tại Nhật Bản, Trung Quốc, Hoa Kỳ và Châu Âu để cung cấp các sản phẩm Omron một cách nhanh chóng và đáng tin cậy. Mạng lưới bán hàng của chúng tôi với khoảng 150 văn phòng tại 40 quốc gia và khu vực hỗ trợ khách hàng của chúng tôi.
Khắc phục sự cố bằng tám ngôn ngữ*
Bạn có thể tìm nguyên nhân và giải pháp cho các lỗi xảy ra trong quá trình vận hành trên trang web khắc phục sự cố bằng tám ngôn ngữ. Các nhà khai thác trên toàn thế giới có thể kiểm tra chi tiết lỗi bằng ngôn ngữ địa phương của họ, điều này sẽ giúp họ giảm thiểu thời gian khắc phục sự cố.
* Tiếng Anh, tiếng Trung, tiếng Ý, tiếng Hàn, tiếng Pháp, tiếng Đức, tiếng Tây Ban Nha và tiếng Nhật
[Điều chỉnh dễ dàng] Tăng năng suất bằng cách phát hiện phôi chính xác
tắt tiếng
F3SG-RA cung cấp chức năng Tắt tiếng nâng cao giúp vô hiệu hóa các tia phát hiện sự hiện diện của phôi hoặc vị trí của máy hoặc rô-bốt.
Phôi gia công có thể đi vào và ra khỏi vùng nguy hiểm mà không cần dừng máy.
[Công nghệ cảm biến đa tia cho phôi rung] Bộ truyền động ngắt thông minh F3W-MA
Bộ truyền động ngắt thông minh mở rộng các chức năng của F3SG-R trong các ứng dụng mà phôi đang rung tiến và lùi. Điều này giúp ngăn chặn thời gian ngừng hoạt động của máy bất ngờ và giảm đáng kể thời gian điều chỉnh.
[Tự động ngắt từng phần cho các phôi gia công có chiều cao khác nhau] Dynamic Muting
Khi các phôi gia công có chiều cao khác nhau được chuyển tải trên cùng một đường, chức năng ngắt động sẽ tự động thiết lập các dầm phù hợp, dựa trên chiều cao của đối tượng.
* Tắt tiếng một phần: Một chức năng cho phép vô hiệu hóa các dầm cụ thể (ví dụ: các dầm bị chặn bởi phôi), giữ cho các dầm khác hoạt động, ngay cả trong khi tắt tiếng.
[Cấu hình và bảo trì dễ dàng] Dễ sử dụng | Công cụ cấu hình SD Manager2
Giảm thiểu lỗi cài đặt và phát hiện
Công cụ cấu hình SD Manager2 trực quan hóa các vị trí cài đặt và cài đặt bằng cách ghi nhật ký các điều kiện hoạt động của cảm biến ngắt của F3SG-R. Nó giúp đảm bảo cấu hình đúng, đáng tin cậy ngay lần đầu tiên.
Từ cấu hình và điều chỉnh đến bảo trì
SD Manager2 giúp bạn thực hiện và thay đổi cài đặt.
Đặc điểm
Main Units
Safety Light Curtain
Hand and arm protection
| Number of beams | Protective height (mm) | Model |
|---|---|---|
| 8 | 185 | F3SG-4RA0185-25-01TS |
| 12 | 265 | F3SG-4RA0265-25-01TS |
| 16 | 345 | F3SG-4RA0345-25-01TS |
| 20 | 425 | F3SG-4RA0425-25-01TS |
| 24 | 505 | F3SG-4RA0505-25-01TS |
| 28 | 585 | F3SG-4RA0585-25-01TS |
| 32 | 665 | F3SG-4RA0665-25-01TS |
| 36 | 745 | F3SG-4RA0745-25-01TS |
| 40 | 825 | F3SG-4RA0825-25-01TS |
| 44 | 905 | F3SG-4RA0905-25-01TS |
| 48 | 985 | F3SG-4RA0985-25-01TS |
| 52 | 1,065 | F3SG-4RA1065-25-01TS |
| 56 | 1,145 | F3SG-4RA1145-25-01TS |
| 60 | 1,225 | F3SG-4RA1225-25-01TS |
| 64 | 1,305 | F3SG-4RA1305-25-01TS |
| 68 | 1,385 | F3SG-4RA1385-25-01TS |
| 72 | 1,465 | F3SG-4RA1465-25-01TS |
| 76 | 1,545 | F3SG-4RA1545-25-01TS |
| 80 | 1,625 | F3SG-4RA1625-25-01TS |
| 84 | 1,705 | F3SG-4RA1705-25-01TS |
| 88 | 1,785 | F3SG-4RA1785-25-01TS |
| 92 | 1,865 | F3SG-4RA1865-25-01TS |
| 96 | 1,945 | F3SG-4RA1945-25-01TS |
Accessories (Sold separately)
Safety light curtain connecting cable
Single-Ended Cable (2 cables per set, one for emitter and one for receiver) *
| Appearance | Cable length | Specifications | Model |
|---|---|---|---|
 | 3m |  | F39-JD3A |
| 7m | F39-JD7A | ||
| 10m | F39-JD10A | ||
| 15m | F39-JD15A | ||
| 20m | F39-JD20A |
* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end of the model number when you order.
Single-Ended Cable for Emitter: F39-JD[]A-L, Single-Ended Cable for Receiver: F39-JD[]A-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable.
Doble-Ended Cable (2 cables per set, one for emitter and one for receiver) *
For cable extension
| Appearance | Cable length | Specifications | Model |
|---|---|---|---|
 | 0.5 m |  | F39-JDR5B |
| 1 m | F39-JD1B | ||
| 3 m | F39-JD3B | ||
| 5 m | F39-JD5B | ||
| 7 m | F39-JD7B | ||
| 10 m | F39-JD10B | ||
| 15 m | F39-JD15B | ||
| 20 m | F39-JD20B |
* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end
of the model number when you order.
Double-Ended Cable for Emitter: F39-JD(R)[]B-L, Double-Ended Cable for Receiver: F39-JD(R)[]B-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable to the F39-JD[]A Single-
Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two F39-JD20B (20 m) cables and one F39-JD10A (10 m)
cable.
of the model number when you order.
Double-Ended Cable for Emitter: F39-JD(R)[]B-L, Double-Ended Cable for Receiver: F39-JD(R)[]B-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable to the F39-JD[]A Single-
Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two F39-JD20B (20 m) cables and one F39-JD10A (10 m)
cable.
Connection example
Cascading Cable (2 cables per set, for emitter and receiver)
| Appearance | Type | Cable length | Specifications | Model |
|---|---|---|---|---|
 | Cap (8-pin), M12 connector (8-pin) | 0.2m |  | F39-JGR2WTS |
Note: The Double-Ended Cable (up to 10 m: F39-JD10B) can be added to extend the cable length between the series-connected sensors. Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable)
Connection example
Reduced Wiring Connector System (Order the F39-CN5 and Cables for Reduce Wiring.)
Reduced Wiring Connector
| Appearance | Specifications | Model |
|---|---|---|
 | IP67 rated when mated. | F39-CN5 |
Note: When using the Reduced Wiring Connector (F39-CN5), the following functions are not available.
– External Device Monitoring
– Auxiliary Output
Cable for Reduce Wiring* (2 cables per set, one for emitter and one for receiver)
| Appearance | Cable length | Specifications | Remarks | Model |
|---|---|---|---|---|
 | Emitter: 3 m Receiver: 3 m | IP67 rated when mated. | Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD3A-D | F39-JD0303BA |
| Emitter: 3 m Receiver: 7 m | Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD7A-D | F39-JD0307BA | ||
| Emitter: 3 m Receiver: 10 m | Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD10A-D | F39-JD0310BA | ||
| Emitter: 5 m Receiver: 3 m | Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD3A-D | F39-JD0503BA | ||
| Emitter: 5 m Receiver: 7 m | Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD7A-D | F39-JD0507BA | ||
| Emitter: 5 m Receive: 10m | Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD10A-D | F39-JD0510BA | ||
| Emitter: 10 m Receiver: 3 m | Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD3A-D | F39-JD1003BA | ||
| Emitter: 10 m Receiver: 7 m | Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD7A-D | F39-JD1007BA | ||
| Emitter: 10 m Receiver: 10 m | Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD10A-D | F39-JD1010BA |
Note: A combination of emitter and receiver cables of other lengths than the above is also available. For details, contact your Omron representative.
* Double-Ended Cable for emitter and Single-Ended Cable for receiver.
Sensor Mounting Brackets
| Appearance | Specification | Application | Model |
|---|---|---|---|
 | Standard Fixed Bracket | Bracket to mount the F3SG-RA-01TS. Side mounting and backside mounting possible. (Sold separately as a set of two Brackets. Refer to note *1 for the number of sets required for each model.) | F39-LGF |
 | Standard Adjustable Bracket | Bracket to mount the F3SG-RA-01TS. Beam alignment after mounting possible. The angle adjustment range is ±15°. Side mounting and backside mounting possible. (Sold separately as a set of two Brackets. Refer to note *1 for the number of sets required for each model.) | F39-LGA |
 | Top/Bottom Adjustable Bracket *2 | Bracket to mount the F3SG-RA-01TS. Use this bracket at the top and bottom positions of the F3SG-RA-01TS. Beam alignment after mounting possible. The angle adjustment range is ±22.5°. Side mounting and backside mounting possible. (Sold separately. 4 brackets per set.) | F39-LGTB |
 | Top/Bottom Adjustable Bracket *2 (For user-made mounting part) | Top/Bottom Adjustable Bracket without a bracket to mount to the wall. Use the user’s own wall mounting part to suit the machine. (Sold separately. 4 brackets per set.) | F39-LGTB-1 |
*1. Protective height of 0185 to 1225: 2 sets, Protective height of 1305 to 1945: 3 sets
*2. Top/Bottom Adjustable Bracket cannot be used with the Standard Fixed Bracket. Use with the Standard Adjustable
Bracket.
Using Top/Bottom Adjustable Brackets with Standard Adjustable Brackets
Protective height of 1065 or less:
The Standard Adjustable Bracket is not required.
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)).
Protective height of 1145 to 1945:
Please purchase 1 set of Top/Bottom Adjustable Brackets (F39-LGTB(-1)) and 1 set of Standard Adjustable Brackets (F39-LGA).
Interface units and configuration tool SD Manager 2 *
| Appearance | Type | Specifications | Model |
|---|---|---|---|
 | SD Manager 2 | The Configuration Tool SD Manager 2 is available to download from our website at http://www.ia.omron.com/f3sg-r_tool. | – |
 | Interface Unit | F39-GIF interface unit to connect the F3SG-RA-01TS receiver to a USB port of the PC Accessories: 0.3-m Dedicated Cable 1 (1), 2-m Dedicated Cable 2 (1), Instruction Manual | F39-GIF |
 | Bluetooth Communication Unit | F39-BT bluetooth unit to enable bluetooth on the F3SG-RA IP67 rated when mated. | F39-BT |
* The F3SG-RA-01TS provides only the monitoring functionality.
Lamp
| Appearance | Type | Specifications | Model |
|---|---|---|---|
 | Lamp unit | The lamp can be connected to a receiver and turned ON based on the operation of F3SG-RA. The lamp output pattern is set as follows: Red (ON): Inverted signal of safety output information Orange (Blink once): Inverted signal of stable-state information Green (ON): Safety output information IP67 rated when mated. | F39-LP |
| Lamp and Bluetooth Communication Unit | F39-BTLP |
End Cap *
| Appearance | Specifications | Model |
|---|---|---|
 | Housing color: Black For both emitter and receiver (Attached to the F3SG-RA-01TS. The End Cap can be purchased if lost.) IP67 rated when mated. | F39-CNM |
* This accessory can also be used with the F3SG-RA-02TS.
Laser Pointer for F3SG-R
| Appearance | Specifications | Model |
|---|---|---|
 | The laser pointer is attached on the optical surface of the F3SG-R to help coarse adjustment of beams. | F39-PTG |
Spatter Protection Cover (2 covers per set, one for emitter and one for receiver)
Spatter Protection Covers include mounting brackets.
| Appearance | Safety Light Curtain Model | Model |
|---|---|---|
| Hand protection | ||
 | F3SG-4RA0185-25-01TS | F39-HGA0200 |
| F3SG-4RA0265-25-01TS | F39-HGA0280 | |
| F3SG-4RA0345-25-01TS | F39-HGA0360 | |
| F3SG-4RA0425-25-01TS | F39-HGA0440 | |
| F3SG-4RA0505-25-01TS | F39-HGA0520 | |
| F3SG-4RA0585-25-01TS | F39-HGA0600 | |
| F3SG-4RA0665-25-01TS | F39-HGA0680 | |
| F3SG-4RA0745-25-01TS | F39-HGA0760 | |
| F3SG-4RA0825-25-01TS | F39-HGA0840 | |
| F3SG-4RA0905-25-01TS | F39-HGA0920 | |
| F3SG-4RA0985-25-01TS | F39-HGA1000 | |
| F3SG-4RA1065-25-01TS | F39-HGA1080 | |
| F3SG-4RA1145-25-01TS | F39-HGA1160 | |
| F3SG-4RA1225-25-01TS | F39-HGA1240 | |
| F3SG-4RA1305-25-01TS | F39-HGA1320 | |
| F3SG-4RA1385-25-01TS | F39-HGA1400 | |
| F3SG-4RA1465-25-01TS | F39-HGA1480 | |
| F3SG-4RA1545-25-01TS | F39-HGA1560 | |
| F3SG-4RA1625-25-01TS | F39-HGA1640 | |
| F3SG-4RA1705-25-01TS | F39-HGA1720 | |
| F3SG-4RA1785-25-01TS | F39-HGA1800 | |
| F3SG-4RA1865-25-01TS | F39-HGA1880 | |
| F3SG-4RA1945-25-01TS | F39-HGA1960 |
Note:
1. The operating range of the Safety Light Curtain attached with the product is 10% shorter than the rating.
2. The product extends over the DIP Switch cover of the Safety Light Curtain. Be sure to use the product only after all required settings are made to the DIP Switch.
Test Rod
| Diameter | Model |
|---|---|
| 25 mm dia. | F39-TRD25 |
F3SG-RA-02TS
Main Units
Safety Light Curtain
Hand and arm protection
| Number of beams | Protective height (mm) | Model |
|---|---|---|
| 12 | 240 | F3SG-4RA0240-25-02TS |
| 16 | 320 | F3SG-4RA0320-25-02TS |
| 20 | 400 | F3SG-4RA0400-25-02TS |
| 24 | 480 | F3SG-4RA0480-25-02TS |
| 28 | 560 | F3SG-4RA0560-25-02TS |
| 32 | 640 | F3SG-4RA0640-25-02TS |
| 36 | 720 | F3SG-4RA0720-25-02TS |
| 40 | 800 | F3SG-4RA0800-25-02TS |
| 44 | 880 | F3SG-4RA0880-25-02TS |
| 48 | 960 | F3SG-4RA0960-25-02TS |
| 52 | 1,040 | F3SG-4RA1040-25-02TS |
| 56 | 1,120 | F3SG-4RA1120-25-02TS |
| 60 | 1,200 | F3SG-4RA1200-25-02TS |
| 64 | 1,280 | F3SG-4RA1280-25-02TS |
| 68 | 1,360 | F3SG-4RA1360-25-02TS |
| 72 | 1,440 | F3SG-4RA1440-25-02TS |
| 76 | 1,520 | F3SG-4RA1520-25-02TS |
| 80 | 1,600 | F3SG-4RA1600-25-02TS |
| 84 | 1,680 | F3SG-4RA1680-25-02TS |
| 88 | 1,760 | F3SG-4RA1760-25-02TS |
| 92 | 1,840 | F3SG-4RA1840-25-02TS |
| 96 | 1,920 | F3SG-4RA1920-25-02TS |
Accessories (Sold separately)
Safety light curtain connecting cable
Single-Ended Cable (Oil-Resistant Cable)
| Appearance | Type | Cable length | Specifications | Model |
|---|---|---|---|---|
 | For emitter M12 connector (8-pin), 5 wires Color: Gray | 3m |  IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * F3SG-RA-02TS meets the degree of protection when this cable is correctly connected with the power cable of the F3SG-RA-02TS. The degree of protection is not satisfied with the part where cable wires are uncovered. | F39-JD3RA-L |
| 7m | F39-JD7RA-L | |||
| For receiver M12 connector (8-pin), 8 wires Color: Black | 3m | F39-JD3RA-D | ||
| 7m | F39-JD7RA-D |
Note: To extend the cable length to more than 7 m, add the F39-JD[]B Double-Ended Cable.
When the Double-Ended Cable is used, protect it from cutting oil.
Single-Ended Cable (2 cables per set, one for emitter and one for receiver) *
| Appearance | Cable length | Specifications | Model |
|---|---|---|---|
 | 3m |  IP67* rated when mated. * When the accessory is used, protect it from cutting oil. | F39-JD3A |
| 7m | F39-JD7A | ||
| 10m | F39-JD10A | ||
| 15m | F39-JD15A | ||
| 20m | F39-JD20A |
* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end of the model number when you order.
Single-Ended Cable for Emitter: F39-JD[]A-L, Single-Ended Cable for Receiver: F39-JD[]A-D
Note:
1. Use the F39-JD[]RA-L/-D for applications where cutting oil resistance is required.
2. To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable.
Double-Ended Cable (2 cables per set, one for emitter and one for receiver) *
| Appearance | Cable length | Specifications | Model |
|---|---|---|---|
 | 0.5m |  IP67* rated when mated. * When the accessory is used, protect it from cutting oil. | F39-JDR5B |
| 1m | F39-JD1B | ||
| 3m | F39-JD3B | ||
| 5m | F39-JD5B | ||
| 7m | F39-JD7B | ||
| 10m | F39-JD10B | ||
| 15m | F39-JD15B | ||
| 20m | F39-JD20B |
* The cable for emitter and the cable for receiver are available separately. Add ‘-L’ for emitter or ‘-D’ for receiver to the end
of the model number when you order.
Double-Ended Cable for Emitter: F39-JD[]B-L, Double-Ended Cable for Receiver: F39-JD[]B-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable to the F39-JD[]A Single-
Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two F39-JD20B (20 m) cables and one F39-JD10A (10 m)
cable.
of the model number when you order.
Double-Ended Cable for Emitter: F39-JD[]B-L, Double-Ended Cable for Receiver: F39-JD[]B-D
Note: To extend the cable length to more than 20 m, add the F39-JD[]B Double-Ended Cable to the F39-JD[]A Single-
Ended Cable.
To extend the cable length to more than 40 m, add several Double-Ended Cables to the Single-Ended Cable.
Example: To extend the cable length to 50 m, connect two F39-JD20B (20 m) cables and one F39-JD10A (10 m)
cable.
Connection example
Reduced Wiring Connector System (Order the F39-CN5 and Cables for Reduce Wiring.)
Reduced Wiring Connector
| Appearance | Specifications | Model |
|---|---|---|
 | IP67* rated when mated. * When the accessory is used, protect it from cutting oil. | F39-CN5 |
Note: When using the Reduced Wiring Connector (F39-CN5), the following functions are not available.
– External Device Monitoring
– Auxiliary Output
Cable for Reduce Wiring* (2 cables per set, one for emitter and one for receiver
| Appearance | Cable length | Specifications | Remarks | Model |
|---|---|---|---|---|
 | Emitter: 3 m Receiver: 3 m | IP67* rated when mated. * When the accessory is used, protect it from cutting oil | Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD3A-D | F39-JD0303BA |
| Emitter: 3 m Receiver: 7 m | Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD7A-D | F39-JD0307BA | ||
| Emitter: 3 m Receiver: 10 m | Double-Ended Cable: F39-JD3B-L Single-Ended Cable: F39-JD10A-D | F39-JD0310BA | ||
| Emitter: 5 m Receiver: 3 m | Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD3A-D | F39-JD0503BA | ||
| Emitter: 5 m Receiver: 7 m | Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD7A-D | F39-JD0507BA | ||
| Emitter: 5 m Receiver: 10 m | Double-Ended Cable: F39-JD5B-L Single-Ended Cable: F39-JD10A-D | F39-JD0510BA | ||
| Emitter: 10 m Receiver: 3 m | Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD3A-D | F39-JD1003BA | ||
| Emitter: 10 m Receiver: 7 m | Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD7A-D | F39-JD1007BA | ||
| Emitter: 10 m Receiver: 10 m | Double-Ended Cable: F39-JD10B-L Single-Ended Cable: F39-JD10A-D | F39-JD1010BA |
Note: A combination of emitter and receiver cables of other lengths than the above is also available. For details, contact your Omron representative.
* Double-Ended Cable for emitter and Single-Ended Cable for receiver.
Cascading Cable (2 cables per set, one for emitter and one for receiver)
| Appearance | Type | Cable length | Specifications | Model |
|---|---|---|---|---|
 | Cap (8-pin), M12 connector (8-pin) | 0.2m |  * When the accessory is used, protect it from cutting oil. | F39-JGR2WTS |
Note: The Double-Ended Cable (up to 10 m: F39-JD10B) can be added to extend the cable length between the series-connected sensors.
Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable)
Sensor Mounting Brackets
| Appearance | Specifications | Application | Model |
|---|---|---|---|
 | Free-Location Bracket (Intermediate Bracket) | Beam alignment after mounting possible. The angle adjustment range is ±15°. Side mounting and backside mounting possible. (Sold separately as a set of 2 brackets. Refer to note *1 for the number of sets required for each model.) | F39-LGRA |
 | Top/Bottom Bracket *2 | Use this bracket at the top and bottom positions of the F3SG-RA-02TS. Beam alignment after mounting possible. The angle adjustment range is ±22.5°. Side mounting and backside mounting possible. (Sold separately as a set of 4 brackets.) | F39-LGRTB |
 | Top/Bottom Bracket *2 | The part of this bracket to contact with a wall surface has a different shape from the F39-LGRTB Top/Bottom Bracket. Use this bracket when replacing an existing safety light curtain with the F3SG-RA-02TS. (Sold separately as a set of 4 brackets.) Select a bracket that fit into the existing mounting hole. | F39-LGRTB-2 |
 | Top/Bottom Bracket *2 | F39-LGRTB-3 |
*1. Protective height of 0240 to 1200 mm: 2 sets, Protective height of 1280 to 1920 mm: 3 sets
*2. Use the Top/Bottom Bracket in combination with the Intermediate Bracket.
Protective height of 1040 or less:
The Intermediate Bracket is not required. Please purchase 1 set of Top/Bottom Brackets (F39-LGRTB(-2/-3)).
Protective height of 1120 to 1920:
Please purchase 1 set of Top/Bottom Brackets (F39-LGRTB(-2/-3)) and 1 set of Intermediate Brackets (F39-LGRA).
Interface units and configuration tool SD Manager 2 *1 *2
| Appearance | Type | Specifications | Model |
|---|---|---|---|
 | SD Manager 2 | The Configuration Tool SD Manager 2 is available to download from our website at http://www.ia.omron.com/f3sg-r_tool | – |
 | Interface Unit | F39-GIF-1 interface unit to connect the F3SG-RA-02TS receiver to a USB port of the PC Accessories: F39-CN1 Branch Connector (1), Connector Cap (1), 2-m Dedicated Cable (1), Instruction Manual | F39-GIF-1 |
 | Bluetooth Communication Unit | F39-BT bluetooth unit to enable bluetooth on the F3SG-RA IP67 rated when mated. | F39-BT |
*1. The F3SG-RA-02TS provides only the monitoring functionality.
*2. When the accessory is used, protect it from cutting oil.
Lamp *
| Appearance | Type | 仕様 | Model |
|---|---|---|---|
 | Lamp | The lamp can be connected to a receiver and turned ON based on the operation of F3SG-RA. The lamp output pattern is set as follows: Red (ON): Inverted signal of safety output information Orange (Blink once): Inverted signal of stable-state information Green (ON): Safety output information IP67 rated when mated. | F39-LP |
| Lamp and Bluetooth Communication Unit | F39-BTLP |
* When the accessory is used, protect it from cutting oil.
End Cap *1 *2
| Appearance | Specifications | Model |
|---|---|---|
 | Housing color: Black For both emitter and receiver (Attached to the F3SG-RA-02TS. The End Cap can be purchased if lost.) IP67 rated when mated. | F39-CNM |
*1. This accessory can also be used with the F3SG-RA-01TS.
*2. When the accessory is used, protect it from cutting oil.
Laser Pointer for F3SG-R *
| Appearance | Specifications | Model |
|---|---|---|
 | The laser pointer is attached on the optical surface of the F3SG-R to help coarse adjustment of beams. | F39-PTG |
* When the accessory is used, protect it from cutting oil.
Test Rod
| Diameter | Model |
|---|---|
| 25 mm dia. | F39-TRD25 |
Thông số kỹ thuật
F3SG-RA-01TS
Main unit
The [][][][] in the model names indicate the protective heights in millimeters.
| F3SG-4RA[][][][]-25-01TS | |||
|---|---|---|---|
| Perform- ance | Object Resolution (Detection Capability) | Opaque objects | |
| 25-mm dia. | |||
| Beam Gap | 20 mm | ||
| Number of Beams | 8 to 96 | ||
| Lens Size | 6.0×5.0 (W×H) mm | ||
| Protective Height | 185 to 1945 mm (7.3 to 76.6 inch) | ||
| Operating Range | Long | 0.3 to 17.0 m (1 to 56 ft.) | |
| Short | 0.3 to 5.0 m (1 to 16 ft.) | ||
| Response Time | ON to OFF | 8 to 13 ms *1 | |
| OFF to ON | 40 to 65ms *1 | ||
| *1.Response time when used in one segment system or in cascaded connection. Refer to the one segment system. Refer to Safety Light Curtain F3SG-4RA[][][][]-25-01TS Series User’s Manual (ManNo.: Z380) for cascaded connection | |||
| Effective Aperture Angle (EAA) (IEC 61496-2) | Type 4 | ±2.5° max., emitter and receiver at operating range of 3 m or greater | |
| Light Source | Infrared LEDs, Wavelength: 870 nm | ||
| Startup Waiting Time | 2 s max. | ||
| Elec- trical | Power Supply Voltage (Vs) | SELV/PELV 24 VDC±20% (ripple p-p 10% max.) | |
| Current Consumption | Refer to “List of Models/Response Time/Current Consumption/Weight”. | ||
| Safety Outputs (OSSD) | Two PNP or NPN transistor outputs (PNP or NPN is selectable by DIP Switch.) | ||
| Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable extension), Capacitive load of 1 μF max., Inductive load of 2.2 H max. *1 Leakage current of 1 mA max. (PNP), 2 mA max. (NPN) *2*1.*The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. *2.*These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor. | |||
| Auxiliary Output | One PNP or NPN transistor output (Safety Output and homopolarity) Load current of 100 mA max., Residual voltage of 2 V max . | ||
| Output Operation Mode | Safety Output | Light-ON (Safety output is enabled when the receiver receives an emitting signal.) | |
| Auxiliary Output | Reverse output of safety output | ||
| Input Voltage | External device monitoring input (Lockout reset input) | PNP ON voltage: Vs-3 V to Vs (short circuit current: approx. 6.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 8.0 mA) * NPN ON voltage: 0 to 3 V (short circuit current: approx. 8.0 mA) * OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 6.5 mA) * | |
| Test input | 24 V inactive setting ON voltage: 0 to 3 V or open (short circuit current: approx. 2.0 mA) OFF voltage: 9 V to Vs (short circuit current: approx. 2.5 mA) * 0 V inactive setting ON voltage: 9 V to Vs or open (short circuit current: approx. 2.5 mA) OFF voltage: 0 to 3 V (short circuit current: approx. 2.0 mA) | ||
| * The Vs indicates a supply voltage value in your environment. | |||
| Overvoltage Category (IEC 60664-1) | II | ||
| Indicators | Refer to “Indicator”. | ||
| Protective Circuit | Output short protection, Power supply reverse polarity protection | ||
| Insulation Resistance | 20 MΩ or higher (500 VDC megger) | ||
| Dielectric Strength | 1,000 VAC, 50/60 Hz (1 min) | ||
| Func- tional | Mutual Interference Prevention (Scan Code) | This function prevents mutual interference in up to two F3SG-RA systems. | |
| Cascade Connection | Number of cascaded segments: 3 max. Total number of beams: 255 max. Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable) | ||
| Test Function | Self-test (at power-on, and during operation) External test (light emission stop function by test input) | ||
| Safety-Related Functions | External device monitoring (EDM) Scan code selection PNP/NPN selection | ||
| Environ- mental | Ambient Temperature | Operating | -10 to 55°C (14 to 131°F) (non-icing) |
| Storage | -25 to 70°C (-13 to 158°F) | ||
| Ambient Humidity | Operating | 35% to 85% (non-condensing) | |
| Storage | 35% to 95% | ||
| Ambient Illuminance | Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface | ||
| Degree of Protection (IEC 60529) | IP65 and IP67 | ||
| Vibration Resistance (IEC 61496-1) | 10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes | ||
| Shock Resistance (IEC 61496-1) | 100 m/s2, 1000 shocks for all 3 axes | ||
| Pollution Degree (IEC 60664-1) | Pollution Degree 3 | ||
| Connec- tions | Power cable | Type of Connection | M12 connectors: 8-pin emitter and receiver, IP67 rated when mated, Cables pre-wired to the sensors |
| Number of Wires | On emitter: 5-wire, On receiver: 8-wire | ||
| Cable Length | 0.3 m | ||
| Cable Diameter | 6 mm | ||
| Minimum Bending Radius | R5 mm | ||
| Cascading cable | Type of Connection | M12 connectors: 8-pin emitter and receiver, IP67 rated when mated | |
| Number of Wires | On emitter: 5-wire, On receiver: 8-wire | ||
| Cable Length | 0.2 m | ||
| Cable Diameter | 6 mm | ||
| Minimum Bending Radius | R5 mm | ||
| Extension cable – Single- Ended Cable – Double- Ended Cable | Type of Connection | M12 connectors: 8-pin emitter and receiver, IP67 rated when mated | |
| Number of Wires | On emitter and receiver: 8-wire | ||
| Cable Length | Refer to Lineup. | ||
| Cable Diameter | 6.6 mm | ||
| Minimum Bending Radius | R36 mm | ||
| Extension of Power Cable | 100 m max.(Emitter/Receiver) | ||
| Material | Material | Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin Cable: Oil-resistant PVC resin FE plate: Stainless steel | |
| Weight | Refer to “List of Models/Response Time/Current Consumption/Weight”. | ||
| Included Accessories | Safety Precautions, Quick Installation Manual, Troubleshooting Guide Sticker, | ||
| Con- formity | Conforming standards | Refer to “Legislation and Standards”. | |
| Type of ESPE (IEC 61496-1) | Type 4 | ||
| Performance Level (PL)/ Safety category | PL e/Category 4 (EN ISO 13849-1:2015) | ||
| PFHD | 1.1 × 10-8 (IEC 61508) | ||
| Proof test interval TM | Every 20 years (IEC 61508) | ||
| SFF | 99% (IEC 61508) | ||
| HFT | 1 (IEC 61508) | ||
| Classification | Type B (IEC 61508-2) | ||
Bluetooth Communication Unit
| Communication System | Bluetooth Version 3.0 |
|---|---|
| Communication Profile | SPP (Serial Port Profile) |
| Transmission Distance | Approx. 10 m max. (Output power: Class 2) * |
* It depends on use environment conditions.
List of Models/Response Time/Current Consumption/Weight
| Model | Number of Beams | Pro- tective Height [mm] | Response Time [ms] *1 | Current Consumption [mA] | Weight [kg] | ||||
|---|---|---|---|---|---|---|---|---|---|
| ON → OFF *2 | OFF (Syn- chronized) → ON | OFF (Not synchro- nized) → ON | Emitter | Receiver | Net *3 | Gross *4 | |||
| F3SG-4RA0185-25-01TS | 8 | 185 | 8 | 40 | 140 | 35 | 75 | 0.7 | 1.4 |
| F3SG-4RA0265-25-01TS | 12 | 265 | 8 | 40 | 140 | 35 | 75 | 0.9 | 1.6 |
| F3SG-4RA0345-25-01TS | 16 | 345 | 8 | 40 | 140 | 40 | 75 | 1.1 | 1.9 |
| F3SG-4RA0425-25-01TS | 20 | 425 | 8 | 40 | 140 | 45 | 75 | 1.3 | 2.2 |
| F3SG-4RA0505-25-01TS | 24 | 505 | 8 | 40 | 140 | 50 | 75 | 1.5 | 2.5 |
| F3SG-4RA0585-25-01TS | 28 | 585 | 8 | 40 | 140 | 50 | 75 | 1.7 | 2.7 |
| F3SG-4RA0665-25-01TS | 32 | 665 | 8 | 40 | 140 | 55 | 75 | 1.9 | 3.0 |
| F3SG-4RA0745-25-01TS | 36 | 745 | 8 | 40 | 140 | 60 | 80 | 2.1 | 3.3 |
| F3SG-4RA0825-25-01TS | 40 | 825 | 8 | 40 | 140 | 65 | 80 | 2.3 | 3.6 |
| F3SG-4RA0905-25-01TS | 44 | 905 | 13 | 65 | 165 | 50 | 80 | 2.5 | 3.8 |
| F3SG-4RA0985-25-01TS | 48 | 985 | 13 | 65 | 165 | 50 | 80 | 2.8 | 4.1 |
| F3SG-4RA1065-25-01TS | 52 | 1065 | 13 | 65 | 165 | 55 | 80 | 3.0 | 4.4 |
| F3SG-4RA1145-25-01TS | 56 | 1145 | 13 | 65 | 165 | 55 | 85 | 3.2 | 4.7 |
| F3SG-4RA1225-25-01TS | 60 | 1225 | 13 | 65 | 165 | 55 | 85 | 3.4 | 5.0 |
| F3SG-4RA1305-25-01TS | 64 | 1305 | 13 | 65 | 165 | 60 | 85 | 3.6 | 5.2 |
| F3SG-4RA1385-25-01TS | 68 | 1385 | 13 | 65 | 165 | 60 | 85 | 3.8 | 5.5 |
| F3SG-4RA1465-25-01TS | 72 | 1465 | 13 | 65 | 165 | 65 | 85 | 4.0 | 5.8 |
| F3SG-4RA1545-25-01TS | 76 | 1545 | 13 | 65 | 165 | 65 | 90 | 4.2 | 6.0 |
| F3SG-4RA1625-25-01TS | 80 | 1625 | 13 | 65 | 165 | 70 | 90 | 4.4 | 6.3 |
| F3SG-4RA1705-25-01TS | 84 | 1705 | 13 | 65 | 165 | 70 | 90 | 4.6 | 6.6 |
| F3SG-4RA1785-25-01TS | 88 | 1785 | 13 | 65 | 165 | 70 | 90 | 4.9 | 6.9 |
| F3SG-4RA1865-25-01TS | 92 | 1865 | 13 | 65 | 165 | 75 | 90 | 5.1 | 7.1 |
| F3SG-4RA1945-25-01TS | 96 | 1945 | 13 | 65 | 165 | 75 | 95 | 5.3 | 7.4 |
*1. The maximum speed of movement of a test rod up to which the detection capability is maintained is 2.0 m/s.
*2. The response times are values when Scan Code is set at Code B. The response times for Code A are 1 ms shorter than these values.
*3. The net weight is the weight of an emitter and a receiver.
*4. The gross weight is the weight of an emitter, a receiver, included accessories and a package.
Legislation and Standards
1. The F3SG-RA-01TS does not receive type approval provided by Article 44-2 of the Industrial Safety and Health Act of
Japan. When using the F3SG-RA-01TS in Japan as a “safety system for pressing or shearing machines” prescribed in
Article 42 of that law, the machine control system must receive type approval.
Japan. When using the F3SG-RA-01TS in Japan as a “safety system for pressing or shearing machines” prescribed in
Article 42 of that law, the machine control system must receive type approval.
2. The F3SG-RA-01TS is electro-sensitive protective equipment (ESPE) in accordance with European Union (EU) Machinery
Directive Index Annex V, Item 2.
Directive Index Annex V, Item 2.
3. EU Declaration of Conformity
OMRON declares that the F3SG-RA-01TS is in conformity with the requirements of the following EU Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
OMRON declares that the F3SG-RA-01TS is in conformity with the requirements of the following EU Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
4. Conforming Standards
(1) European standards
EN61496-1 (Type 4 and Type 2 ESPE), EN 61496-2 (Type 4 and Type 2 AOPD), EN61508-1 through -4 (SIL 3 for
Type 4 and SIL 1 for Type 2), EN ISO 13849-1:2015 (PL e, Category 4 for Type 4 and PL c, Category 2 for Type 2)
(2) International standards
IEC61496-1 (Type 4 and Type 2 ESPE), IEC61496-2 (Type 4 and Type 2 AOPD), IEC61508-1 through -4 (SIL 3 for
Type 4 and SIL 1 for Type 2), ISO 13849-1:2015 (PL e, Category 4 for Type 4 and PL c, Category 2 for Type 2)
(3) JIS standards
JIS B 9704-1 (Type 4 and Type 2 ESPE), JIS B 9704-2 (Type 4 and Type 2 AOPD)
(4) North American standards
UL61496-1(Type 4 and Type 2 ESPE), UL61496-2(Type 4 and Type 2 AOPD), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
(1) European standards
EN61496-1 (Type 4 and Type 2 ESPE), EN 61496-2 (Type 4 and Type 2 AOPD), EN61508-1 through -4 (SIL 3 for
Type 4 and SIL 1 for Type 2), EN ISO 13849-1:2015 (PL e, Category 4 for Type 4 and PL c, Category 2 for Type 2)
(2) International standards
IEC61496-1 (Type 4 and Type 2 ESPE), IEC61496-2 (Type 4 and Type 2 AOPD), IEC61508-1 through -4 (SIL 3 for
Type 4 and SIL 1 for Type 2), ISO 13849-1:2015 (PL e, Category 4 for Type 4 and PL c, Category 2 for Type 2)
(3) JIS standards
JIS B 9704-1 (Type 4 and Type 2 ESPE), JIS B 9704-2 (Type 4 and Type 2 AOPD)
(4) North American standards
UL61496-1(Type 4 and Type 2 ESPE), UL61496-2(Type 4 and Type 2 AOPD), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
5. Third-Party Certifications
(1) TÜV SÜD
• EC Type-Examination certificate:
EU Machinery Directive, Type 4 and Type 2 ESPE (EN61496-1), Type 4 and Type 2 AOPD (EN 61496-2)
• Certificate:
Type 4 and Type 2 ESPE (EN61496-1), Type 4 and Type 2 AOPD (EN61496-2), EN 61508-1 through -4 (SIL 3
for Type 4 and SIL 1 for Type 2), EN ISO 13849-1:2015 (PL e, Category 4 for Type 4, and PL c, Category 2 for
Type 2)
(2) UL
• UL Listing:
Type 4 and Type 2 ESPE (UL61496-1), Type 4 and Type 2 AOPD (UL61496-2), UL508, UL1998, CAN/CSA C22.2
No.14, CAN/CSA C22.2 No.0.8
(1) TÜV SÜD
• EC Type-Examination certificate:
EU Machinery Directive, Type 4 and Type 2 ESPE (EN61496-1), Type 4 and Type 2 AOPD (EN 61496-2)
• Certificate:
Type 4 and Type 2 ESPE (EN61496-1), Type 4 and Type 2 AOPD (EN61496-2), EN 61508-1 through -4 (SIL 3
for Type 4 and SIL 1 for Type 2), EN ISO 13849-1:2015 (PL e, Category 4 for Type 4, and PL c, Category 2 for
Type 2)
(2) UL
• UL Listing:
Type 4 and Type 2 ESPE (UL61496-1), Type 4 and Type 2 AOPD (UL61496-2), UL508, UL1998, CAN/CSA C22.2
No.14, CAN/CSA C22.2 No.0.8
6. Other Standards
The F3SG-RA-01TS is designed according to the standards listed below. To make sure that the final system complies
with the following standards and regulations, you are asked to design and use it in accordance with all other related
standards, laws, and regulations. If you have any questions, consult with specialized organizations such as the body
responsible for prescribing and/or enforcing machinery safety regulations in the location where the equipment is to
be used.
• European Standards: EN415-4, EN691-1, EN692, EN693, IEC 62046
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.212
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA R15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
• Japan Ministry of Health, Labour and Welfare “Guidelines for Comprehensive Safety Standards of Machinery”,
Standard Bureau’s Notification No. 0731001 dated July 31, 2007.rms and Conditions Agreement
The F3SG-RA-01TS is designed according to the standards listed below. To make sure that the final system complies
with the following standards and regulations, you are asked to design and use it in accordance with all other related
standards, laws, and regulations. If you have any questions, consult with specialized organizations such as the body
responsible for prescribing and/or enforcing machinery safety regulations in the location where the equipment is to
be used.
• European Standards: EN415-4, EN691-1, EN692, EN693, IEC 62046
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.212
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA R15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
• Japan Ministry of Health, Labour and Welfare “Guidelines for Comprehensive Safety Standards of Machinery”,
Standard Bureau’s Notification No. 0731001 dated July 31, 2007.rms and Conditions Agreement
Indicator
Emitter
| Name of Indicator | Color | Illuminated | Blinking |
|---|---|---|---|
| TEST | Green | – | External Test is being performed |
| LONG | Green | Long range mode is selected | Lockout state due to DIP Switch setting error or Operating range selection setting error |
| POWER | Green | Power is ON. | Error due to noise |
| LOCKOUT | Red | – | Lockout state due to error in emitter |
Receiver
| Name of Indicator | Color | Illuminated | Blinking |
|---|---|---|---|
| TOP | Blue | The top beam is unblocked | Lockout state due to Cap error or Other sensor error |
| NPN | Green | NPN mode is selected by DIP Switch | – |
| CFG | Green | – | Lockout state due to Cascading Configuration error |
| EDM | Green | EDM input is in ON state * | Lockout state due to EDM error |
| INTERNAL | Red | – | Lockout state due to Internal error, or error due to abnormal power supply or noise |
| LOCKOUT | Red | – | Lockout state due to error in receiver |
| STB | Green | Incident light level is 170% or higher of ON-threshold | Safety output is instantaneously turned OFF due to ambient light or vibration. |
| ON/OFF | Green | Safety output is in ON state | – |
| Red | Safety output is in OFF state | Lockout state due to Safety Output error, or error due to abnormal power supply or noise | |
| COM | Green | Synchronization between emitter and receiver is maintained | Lockout state due to Communication error, or error due to abnormal power supply or noise |
| BTM | Blue | The bottom beam is unblocked | Lockout state due to DIP Switch setting error |
* The LED is illuminated when the EDM input is in ON state regardless of wiring with EDM used or unused.
Interface Unit
| Main unit | PC/AT compatible machine (computer that runs Microsoft Windows) |
|---|---|
| Operating system (OS) | Windows 7 (32-bit/64-bit), Windows 8, 8.1 (32-bit/64-bit), Windows 10 (32-bit/64-bit) |
| Communication port | USB port ×1 |
| Ambient temperature | Operating: -10 to 55°C, Storage: -30 to 70°C(non-icing and non-condensing) |
| Ambient humidity | Operating: 35% to 85%, Storage: 35% to 95%(non-condensing) |
Lamp
| Item | F39-LP |
|---|---|
| Applicable Sensor | F3SG-[]RA Series Safety Light Curtain (Receiver) |
| LED Light Color | Red/Orange/Green |
| Power Supply Voltage | 24 VDC±20%, ripple p-p 10% max.(shares sensor’s power supply) |
| Current Consumption | 25 mA max. (shares sensor′s power supply.) |
| Ambient Temperature | Operating: -10 to 55°C, Storage: -25 to 70°C |
| Ambient Humidity | Operating: 35% to 85%, Storage: 35% to 95% |
| Vibration Resistance | 10 to 55 Hz, Multiple amplitude of 0.7 mm,20 sweeps for all 3 axes |
| Shock Resistance | 100 m/s2 , 1000 shocks for all 3 axes |
| Degree of Protection | IP65 and IP67(When attached to F3SG) |
| Type of Connection | Connectable to F3SG-RA’s terminal connector |
| Material | Lighting element: PC, Other body parts: PBT |
| Weight | 45 g (when packaged) |
F3SG-RA-02TS
Main unit
The [][][][] in the model names indicate the protective heights in millimeters.
| F3SG-4RA[][][][]-25-02TS | |||
|---|---|---|---|
| Perform- ance | Object Resolution (Detection Capability) | Opaque objects | |
| 25-mm dia. | |||
| Beam Gap | 20 mm | ||
| Number of Beams | 12 to 96 | ||
| Lens Size | 6.0 × 5.0 (W × H) mm | ||
| Protective Height | 240 to 1920 mm | ||
| Operating Range | 0.3 to 17.0 m | ||
| Response Time | ON to OFF | Normal mode: 8 to 13 ms *1 | |
| OFF to ON | Normal mode: 40 to 90ms (synchronized), 140 to 190ms (not synchronized) *1 | ||
| *1.Response time when used in one segment system or in cascaded connection. Refer to the one segment system. Refer to Safety Light Curtain F3SG-4RA[][][][]-25-02TS Series User’s Manual (ManNo.: Z391) for cascaded connection. | |||
| EffectiveApertureAngle (EAA) (IEC 61496-2) | ±2.5° max., emitter and receiver at operating range of 3 m or greater | ||
| Light Source | Infrared LEDs, Wavelength: 870 nm | ||
| Startup Waiting Time | 2 s max. | ||
| Elec- trical | Power Supply Voltage (Vs) | SELV/PELV 24 VDC±20% (ripple p-p 10% max.) | |
| Current Consumption | Refer to “List of Models/Response Time/Current Consumption/Weight”. | ||
| Safety Outputs (OSSD) | Two PNP transistor outputs | ||
| Load current of 300 mA max., Residual voltage of 2 V max. (except for voltage drop due to cable extension), Capacitive load of 1 μF max., Inductive load of 2.2 H max. *1 Leakage current of 1 mA max.*1. The load inductance is the maximum value when the safety output frequently repeats ON and OFF. When you use the safety output at 4 Hz or less, the usable load inductance becomes larger. *2. These values must be taken into consideration when connecting elements including a capacitive load such as a capacitor. | |||
| Auxiliary Output | One PNP transistor output | ||
| Load current of 100 mA max., Residual voltage of 2 V max . | |||
| Output Operation Mode | Safety Output | Light-ON (Safety output is enabled when the receiver receives an emitting signal.) | |
| Auxiliary Output | Reverse output of safety output | ||
| Input Voltage | External device monitoring input (Lockout reset input) | ON voltage: Vs-3 V to Vs (short circuit current: approx. 6.5 mA) * OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 8.0 mA) * | |
| Test input | 24 V Active setting: ON voltage: 9 V to Vs (short circuit current: approx. 2.5 mA) * OFF voltage: 0 V to 3 V or open (short circuit current: approx. 2.0 mA) 0 V Active setting: ON voltage: 0 V to 3 V (short circuit current: approx. 2.0 mA) OFF voltage: 9 V to Vs or open (short circuit current: approx. 2.5 mA) * | ||
| * The Vs indicates a supply voltage value in your environment. | |||
| Overvoltage Category (IEC 60664-1) | II | ||
| Indicators | Refer to “Indicator”. | ||
| Protective Circuit | Output short protection, Power supply reverse polarity protection | ||
| Insulation Resistance | 20 MΩ or higher (500 VDC megger) | ||
| Dielectric Strength | 1,000 VAC, 50/60 Hz (1 min) | ||
| Func- tional | Mutual Interference Prevention (Scan Code) | This function prevents mutual interference in up to two F3SG-RA-25-02TS systems. | |
| Cascade Connection | Number of cascaded segments: 3 max. (only among F3SG-4RA[][][][]-25-02TS’s) | ||
| Total number of beams: 255 max. Cable length between sensors: 10 m max. (not including cascading cable (F39-JGR2WTS) and power cable) | |||
| Test Function | Self-test (at power-on, and during operation) External test (light emission stop function by test input) | ||
| Safety-Related Functions | External device monitoring (EDM) Scan code selection | ||
| Environ- mental | Ambient Temperature | Operating | -10 to 55°C (14 to 131°F) (non-icing) |
| Storage | -25 to 70°C (-13 to 158°F) | ||
| Ambient Humidity | Operating | 35% to 85% (non-condensing) | |
| Storage | 35% to 95% | ||
| Ambient Illuminance | Incandescent lamp: 3,000 Ix max. on receiver surface Sunlight: 10,000 Ix max. on receiver surface | ||
| Degree of Protection (IEC 60529) | IEC 60529: IP65 and IP67, JIS C 0920 Annex 1: IP67G | ||
| Vibration Resistance (IEC 61496-1) | 10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes | ||
| Shock Resistance (IEC 61496-1) | 100 m/s2, 1000 shocks for all 3 axes | ||
| Pollution Degree (IEC 60664-1) | Pollution Degree 3 | ||
| Connec- tions | Power cable | Type of Connection | M12 connectors: 8-pin emitter and receiver. Cables prewired to the sensors. IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated. * F3SG-RA-25-02TS meets the degree of protection when it is correctly connected withan F39-JD[][]RA-[] Oil-Resistant extension cable. |
| Number of Wires | Emitter: 5, Receiver: 8 | ||
| Cable Length | 0.3 m | ||
| Cable Diameter | 6 mm | ||
| Minimum Bending Radius | R36 mm | ||
| Cascading cable | Type of Connection | M12 connectors: 8-pin emitter and receiver. IP67 rated when mated. | |
| Number of Wires | Emitter: 5, Receiver: 8 | ||
| Cable Length | 0.3 m | ||
| Cable Diameter | 6 mm | ||
| Minimum Bending Radius | R5 mm | ||
| F39-JD[]RA-[] Oil- Resistant cable – Single- Ended Cable | Type of Connection | M12 connectors: 8-pin emitter and receiver. Cables prewired to the sensors. IP67 and IP67G (JIS C 0920 Annex 1)* rated when mated. * F3SG-RA-25-02TS meets the degree of protection when it is correctly connected with the power cable. The degree of protection is not satisfied with the part where cable wires are uncovered. | |
| Number of Wires | Emitter: 5, Receiver: 8 | ||
| Cable Length | Refer to Lineup. | ||
| Cable Diameter | 6 mm | ||
| Minimum Bending Radius | R36 mm | ||
| Extension cable – Single- Ended Cable (F39-JD[]A) – Double- Ended Cable (F39-JD[]B) | Type of Connection | M12 connectors: 8-pin emitter and receiver. IP67 rated when mated. | |
| Number of Wires | Emitter: 8, Receiver: 8 | ||
| Cable Length | Refer to Lineup. | ||
| Cable Diameter | 6.6 mm | ||
| Minimum Bending Radius | R36 mm | ||
| Extension of Power Cable | 100 m max. (Emitter/Receiver) | ||
| Material | Material | Housing: Aluminum alloy Cap: PBT resin Front window: Acrylic resin Cable: Fluororesin FE plate: Stainless steel | |
| Weight | Refer to “List of Models/Response Time/Current Consumption/Weight”. | ||
| Included Accessories | Safety Precautions, Quick Installation Manual, Troubleshooting Guide Sticker, End Cap (for switching External Test Input function) | ||
| Con- formity | Conforming standards | Refer to “Legislation and Standards”. | |
| Performance Level (PL)/ Safety category | PL e/Category 4 (EN ISO 13849-1:2015) | ||
| PFHD | 1.1 × 10-8(IEC 61508) | ||
| Proof test interval TM | Every 20 years (IEC 61508) | ||
| SFF | 99% (IEC 61508) | ||
| HFT | 1 (IEC 61508) | ||
| Classification | Type B (IEC 61508-2) | ||
Bluetooth Communication Unit
| Communication System | Bluetooth Version 3.0 |
|---|---|
| Communication Profile | SPP (Serial Port Profile) |
| Transmission Distance | Approx. 10 m max. (Output power: Class 2) * |
* It depends on use environment conditions.
List of Models/Response Time/Current Consumption/Weight
| Model | Number of Beams | Pro- tective Height [mm] | Response Time [ms] *1 | Current Consumption [mA] | Weight [kg] | ||||
|---|---|---|---|---|---|---|---|---|---|
| ON → OFF *2 | OFF (Syn- chronized) → ON | OFF (Not synchro- nized) → ON | Emitter | Receiver | Net *3 | Gross *4 | |||
| F3SG-4RA0240-25-02TS | 12 | 240 | 8 | 40 | 140 | 35 | 75 | 0.7 | 1.6 |
| F3SG-4RA0320-25-02TS | 16 | 320 | 8 | 40 | 140 | 40 | 75 | 0.9 | 1.9 |
| F3SG-4RA0400-25-02TS | 20 | 400 | 8 | 40 | 140 | 45 | 75 | 1.1 | 2.1 |
| F3SG-4RA0480-25-02TS | 24 | 480 | 8 | 40 | 140 | 50 | 75 | 1.3 | 2.4 |
| F3SG-4RA0560-25-02TS | 28 | 560 | 8 | 40 | 140 | 50 | 75 | 1.5 | 2.7 |
| F3SG-4RA0640-25-02TS | 32 | 640 | 8 | 40 | 140 | 55 | 75 | 1.7 | 3.0 |
| F3SG-4RA0720-25-02TS | 36 | 720 | 8 | 40 | 140 | 60 | 80 | 1.9 | 3.2 |
| F3SG-4RA0800-25-02TS | 40 | 800 | 8 | 40 | 140 | 65 | 80 | 2.1 | 3.5 |
| F3SG-4RA0880-25-02TS | 44 | 880 | 13 | 65 | 165 | 50 | 80 | 2.3 | 3.8 |
| F3SG-4RA0960-25-02TS | 48 | 960 | 13 | 65 | 165 | 50 | 80 | 2.5 | 4.0 |
| F3SG-4RA1040-25-02TS | 52 | 1040 | 13 | 65 | 165 | 55 | 80 | 2.7 | 4.3 |
| F3SG-4RA1120-25-02TS | 56 | 1120 | 13 | 65 | 165 | 55 | 85 | 2.9 | 4.6 |
| F3SG-4RA1200-25-02TS | 60 | 1200 | 13 | 65 | 165 | 55 | 85 | 3.1 | 4.9 |
| F3SG-4RA1280-25-02TS | 64 | 1280 | 13 | 65 | 165 | 60 | 85 | 3.3 | 5.1 |
| F3SG-4RA1360-25-02TS | 68 | 1360 | 13 | 65 | 165 | 60 | 85 | 3.5 | 5.4 |
| F3SG-4RA1440-25-02TS | 72 | 1440 | 13 | 65 | 165 | 65 | 85 | 3.7 | 5.7 |
| F3SG-4RA1520-25-02TS | 76 | 1520 | 13 | 65 | 165 | 65 | 90 | 3.9 | 5.9 |
| F3SG-4RA1600-25-02TS | 80 | 1600 | 13 | 65 | 165 | 70 | 90 | 4.1 | 6.2 |
| F3SG-4RA1680-25-02TS | 84 | 1680 | 13 | 65 | 165 | 70 | 90 | 4.3 | 6.5 |
| F3SG-4RA1760-25-02TS | 88 | 1760 | 13 | 65 | 165 | 70 | 90 | 4.5 | 6.7 |
| F3SG-4RA1840-25-02TS | 92 | 1840 | 13 | 65 | 165 | 75 | 90 | 4.7 | 7.0 |
| F3SG-4RA1920-25-02TS | 96 | 1920 | 13 | 65 | 165 | 75 | 95 | 4.9 | 7.3 |
*1. The maximum speed of movement of a test rod up to which the detection capability is maintained is 2.0 m/s.
*2. The response times are values when Scan Code is set at Code B. The response times for Code A are 1 ms shorter than these values.
*3. The net weight is the weight of an emitter and a receiver.
*4. The gross weight is the weight of an emitter, a receiver, included accessories and a package.
Legislation and Standards
1. The F3SG-RA-02TS does not receive type approval provided by Article 44-2 of the Industrial Safety and Health Act of
Japan. When using the F3SG-RA-02TS in Japan as a “safety system for pressing or shearing machines” prescribed in
Article 42 of that law, the machine control system must receive type approval.
Japan. When using the F3SG-RA-02TS in Japan as a “safety system for pressing or shearing machines” prescribed in
Article 42 of that law, the machine control system must receive type approval.
2. The F3SG-RA-02TS is electro-sensitive protective equipment (ESPE) in accordance with European Union (EU) Machinery
Directive Index Annex V, Item 2.
Directive Index Annex V, Item 2.
3. EC/EU Declaration of Conformity
OMRON declares that the F3SG-RA-02TS is in conformity with the requirements of the following EC/EU Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
OMRON declares that the F3SG-RA-02TS is in conformity with the requirements of the following EC/EU Directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
4. Conforming Standards
(1) European standards
EN61496-1 (Type 4 ESPE), EN 61496-2 (Type 4 AOPD), EN61508-1 through -4 (SIL 3),
EN ISO 13849-1:2015 (PL e, Category 4)
(2) International standards
IEC61496-1 (Type 4 ESPE), IEC61496-2 (Type 4 AOPD), IEC61508-1 through -4 (SIL 3),
ISO 13849-1:2015 (PL e, Category 4)
(3) JIS standards
JIS B 9704-1 (Type 4 ESPE), JIS B 9704-2 (Type 4 AOPD)
(4) North American standards
UL61496-1 (Type 4 ESPE), UL61496-2 (Type 4 AOPD), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
(1) European standards
EN61496-1 (Type 4 ESPE), EN 61496-2 (Type 4 AOPD), EN61508-1 through -4 (SIL 3),
EN ISO 13849-1:2015 (PL e, Category 4)
(2) International standards
IEC61496-1 (Type 4 ESPE), IEC61496-2 (Type 4 AOPD), IEC61508-1 through -4 (SIL 3),
ISO 13849-1:2015 (PL e, Category 4)
(3) JIS standards
JIS B 9704-1 (Type 4 ESPE), JIS B 9704-2 (Type 4 AOPD)
(4) North American standards
UL61496-1 (Type 4 ESPE), UL61496-2 (Type 4 AOPD), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
5. Third-Party Certifications
(1) TÜV SÜD
• EC Type-Examination certificate:
EU Machinery Directive, Type 4 ESPE (EN61496-1), Type 4 AOPD (EN 61496-2)
• Certificate:
Type 4 ESPE (EN61496-1), Type 4 AOPD (EN61496-2), EN 61508-1 through -4 (SIL 3),
EN ISO 13849-1:2015 (PL e, Category 4)
(2) UL
• UL Listing:
Type 4 and ESPE (UL61496-1), Type 4 AOPD (UL61496-2), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
(1) TÜV SÜD
• EC Type-Examination certificate:
EU Machinery Directive, Type 4 ESPE (EN61496-1), Type 4 AOPD (EN 61496-2)
• Certificate:
Type 4 ESPE (EN61496-1), Type 4 AOPD (EN61496-2), EN 61508-1 through -4 (SIL 3),
EN ISO 13849-1:2015 (PL e, Category 4)
(2) UL
• UL Listing:
Type 4 and ESPE (UL61496-1), Type 4 AOPD (UL61496-2), UL508, UL1998,
CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
6. Other Standards
The F3SG-RA-02TS is designed according to the standards listed below. To make sure that the final system complies
with the following standards and regulations, you are asked to design and use it in accordance with all other related
standards, laws, and regulations. If you have any questions, consult with specialized organizations such as the body
responsible for prescribing and/or enforcing machinery safety regulations in the location where the equipment is to
be used.
• European Standards: EN415-4, EN691-1, EN692, EN693, IEC 62046
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.212
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA R15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
• Japan Ministry of Health, Labour and Welfare “Guidelines for Comprehensive Safety Standards of Machinery”,
Standard Bureau’s Notification No. 0731001 dated July 31, 2007.rms and Conditions Agreement
The F3SG-RA-02TS is designed according to the standards listed below. To make sure that the final system complies
with the following standards and regulations, you are asked to design and use it in accordance with all other related
standards, laws, and regulations. If you have any questions, consult with specialized organizations such as the body
responsible for prescribing and/or enforcing machinery safety regulations in the location where the equipment is to
be used.
• European Standards: EN415-4, EN691-1, EN692, EN693, IEC 62046
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.212
• U.S. Occupational Safety and Health Standards: OSHA 29 CFR 1910.217
• American National Standards: ANSI B11.1 to B11.19
• American National Standards: ANSI/RIA R15.06
• Canadian Standards Association CSA Z142, Z432, Z434
• SEMI Standards SEMI S2
• Japan Ministry of Health, Labour and Welfare “Guidelines for Comprehensive Safety Standards of Machinery”,
Standard Bureau’s Notification No. 0731001 dated July 31, 2007.rms and Conditions Agreement
Indicator
Emitter
| Name of Indicator | Color | Illuminated | Blinking | |
|---|---|---|---|---|
| Test | TEST | Green | – | External Test is being performed |
| Operating range | LONG | Green | Always illuminated | Lockout state due to Scan code setting error |
| Power | POWER | Green | Power is ON. | Error due to noise |
| Lockout | LOCKOUT | Red | – | Lockout state due to error in emitter |
Receiver
| Name of Indicator | Color | Illuminated | Blinking | |
|---|---|---|---|---|
| Top-beam-state | TOP | Blue | The top beam is unblocked | Lockout state due to Cap error or Other sensor error |
| PNP/NPN mode | NPN | Green | Always illuminated | – |
| Configuration | CFG | Green | – | Lockout state due to Parameter error or Cascading Configuration error |
| External device monitoring | EDM | Green | EDM input is in ON state * | Lockout state due to EDM error |
| Internal error | INTERNAL | Red | – | Lockout state due to Internal error, or error due to abnormal power supply or noise |
| Lockout | LOCKOUT | Red | – | Lockout state due to error in receiver |
| Stable-state | STB | Green | Incident light level is 170% or higher of ON-threshold | Safety output is instantaneously turned OFF due to ambient light or vibration |
| ON/OFF | ON/OFF | Green | Safety output is in ON state | – |
| Red | Safety output is in OFF state | Lockout state due to Safety Output error, or error due to abnormal power supply or noise | ||
| Communication | COM | Green | Synchronization between emitter and receiver is maintained | Lockout state due to Communication error, or error due to abnormal power supply or noise |
| Bottom-beam state | BTM | Blue | The bottom beam is unblocked | Lockout state due to Scan code setting error |
Note: TOP, CFG, LOCKOUT, STB and ON/OFF indicators are illuminated when the receiver of the F3SG-RA-02TS is in Setting mode.
* The EDM indicator is illuminated when the EDM input is in the ON state regardless of the use of the EDM function.
Interface Unit
| Main Unit | PC/AT compatible machine (computer that runs Microsoft Windows) |
|---|---|
| Operating System (OS) | Windows 7 (32-bit/64-bit), Windows 8, 8.1 (32-bit/64-bit), Windows 10 (32-bit/64-bit) |
| Communication Port | USB port ×1 |
| Ambient Temperature | Operating: -10 to 55°C, Storage: -30 to 70°C (non-icing and non-condensing) |
| Ambient Humidity | Operating: 35% to 85%, Storage: 35% to 95% (non-condensing) |
Lamp
| Item | F39-LP |
|---|---|
| Applicable Sensor | F3SG-[]RA Series Safety Light Curtain (Receiver) |
| LED Light Color | Red/Green/Orange |
| Power Supply Voltage | 24 VDC±20%, ripple p-p 10% max. (shares sensor’s power supply) |
| Current Consumption | 25 mA max. (shares sensor’s power supply.) |
| Ambient Temperature | Operating: -10 to 55°C, Storage: -25 to 70°C |
| Ambient Humidity | Operating: 35% to 85%, Storage: 35% to 95% |
| Vibration Resistance | 10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes |
| Shock Resistance | 100 m/s2 , 1000 shocks for all 3 axes |
| Degree of Protection | IP65 and IP67 (When attached to F3SG) |
| Type of Connection | Connectable to F3SG-RA’s terminal connector |
| Material | Lighting element: PC, Other body parts: PBT |
| Weight | 45 g (when packaged) |
Kích thước
(Unit: mm)
F3SG-RA-01TS
Mounted with Standard Fixed Brackets (F39-LGF)
Backside Mounting
Side Mounting
Mounted with Standard Adjustable Brackets (F39-LGA)
Backside Mounting
Side Mounting
Mounted with Top/Bottom Adjustable Brackets (F39-LGTB) and Standard Adjustable Brackets (F39-LGA)
Dimensions when using the F3SG-RA Series except the F3SG-4RA0185-25-01TS.
Refer to Safety Light Curtain F3SG-4RA[][][][]-25-01TS Series User’s Manual for the dimensions when using the F3SG-4RA0185-25-01TS.
Backside Mounting
Side Mounting
Accessories
Sensor Mounting Brackets
Standard Fixed Bracket (F39-LGF)
Standard Adjustable Bracket (F39-LGA, sold separately)
Top/Bottom Adjustable Bracket (F39-LGTB, sold separately)
Safety light curtain connecting cable
Single-Ended Cable for Emitter (F39-JD[]A-L, sold separately)
Single-Ended Cable for Receiver (F39-JD[]A-D, sold separately)
Double-Ended Cable for Emitter: Cable for extension (F39-JD[]B-L, sold separately)
Double-Ended Cable for Receiver: Cable for extension (F39-JD[]B-D, sold separately)
Reduced Wiring Connector (F39-CN5, sold separately)
Cascading Cable for Emitter (F39-JGR2WTS-L, sold separately)
Cascading Cable for Receiver (F39-JGR2WTS-D, sold separately)
Interface Unit (F39-GIF, sold separately)
Spatter Protection Cover (F39-HGA, sold separately)
Bluetooth Communication Unit (F39-BT, sold separately)
Lamp and Bluetooth Communication Unit (F39-BTLP, sold separately)
Lamp (F39-LP, sold separately)
F3SG-RA-02TS
Mounted with Free-Location Brackets (F39-LGRA)
Backside Mounting
Side Mounting
Mounted with Top/Bottom Brackets (F39-LGRTB) and Intermediate Bracket (F39-LGRA)
Backside Mounting
Side Mounting
Mounted with Top/Bottom Brackets (F39-LGRTB-2) and Intermediate Bracket (F39-LGRA)
Backside Mounting
Side Mounting
Mounted with Top/Bottom Brackets (F39-LGRTB-3) and Intermediate Bracket (F39-LGRA)
Backside Mounting
Side Mounting
Accessories
Sensor Mounting Brackets
Free-Location Bracket / Intermediate Bracket (F39-LGRA, sold separately
Top/Bottom Bracket (F39-LGRTB, sold separately)
Top/Bottom Bracket (F39-LGRTB-2, sold separately)
Top/Bottom Bracket (F39-LGRTB-3, sold separately)
Safety light curtain connecting cable
Single-Ended Cable for Emitter (Oil-Resistant Cable) (F39-JD[]RA-L, sold separately)
Single-Ended Cable for Receiver (Oil-Resistant Cable) (F39-JD[]RA-D, sold separately)
Single-Ended Cable for Emitter (F39-JD[]A-L, sold separately)
Single-Ended Cable for Receiver (F39-JD[]A-D, sold separately)
Double-Ended Cable for Emitter: Cable for extension (F39-JD[]B-L, sold separately)
Double-Ended Cable for Receiver: Cable for extension (F39-JD[]B-D, sold separately)
Reduced Wiring Connector (F39-CN5, sold separately)
Cascading Cable for Emitter (F39-JGR2WTS-L, sold separately)
Cascading Cable for Receiver (F39-JGR2WTS-D, sold separately)
Interface Unit (F39-GIF-1, sold separately)
Bluetooth Communication Unit (F39-BT, sold separately)
Lamp and Bluetooth Communication Unit (F39-BTLP, sold separately)
Lamp (F39-LP, sold separately)
MODEL
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | F3SG-RA-01TS/ 02TS | Item list of F3SG-RA-01TS/ 02TS |
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | F3SG-RA-01TS/ 02TS |  |
Hãy là người đầu tiên nhận xét “Cảm biến an toàn Omron F3SG-RA-02TS”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.