Chưa có sản phẩm trong giỏ hàng.
| Appearance | Sensing distance (Adjustable range) | Output configuration | Model/Operation mode | |
|---|---|---|---|---|
| NO | NC | |||
Flat Unshielded | 10 mm | DC 3-wire NPN | E2K-F10MC1 2M | E2K-F10MC2 2M |
| 10 mm (4 to 10 mm) | E2K-F10MC1-A 2M | E2K-F10MC2-A 2M | ||
Cảm biến điện dung Omron E2K-F
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Cảm biến điện dung phẳng với độ dày chỉ 10 mm
Đặc điểm
Sensors
Thông số kỹ thuật
| Model | E2K-F10MC[]-A | E2K-F10MC[] | |
|---|---|---|---|
| Sensing distance | 10 mm (Sensing distance adjustable range: 4 to 10 mm) | 10 mm ±10% | |
| Set distance | 0 to 7.5 mm * | ||
| Differential travel | 15% max. of sensing distance | ||
| Detectable object | Conductors and dielectrics | ||
| Standard sensing object | Grounded metal plate: 50 × 50 × 1 mm | ||
| Response frequency | 100 Hz | ||
| Power supply voltage (operating voltage range) | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
| Current consumption | 10 mA max. at 24 VDC | ||
| Control output | Load current | NPN open collector, 100 mA max. (at 30 VDC) | |
| Residual voltage | 1.5 V max. (Load current: 100 mA, Cable length: 2 m) | ||
| Indicators | Detection indicator (red) | ||
| Number of turns of sensitivity adjustment | 11 turns | – | |
| Operation mode (with sensing object approaching) | NO (Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.) | ||
| Protection circuits | Reverse polarity protection, Surge suppressor | ||
| Ambient temperature range | Operating/Storage: -10 to 55°C (with no icing or condensation) | ||
| Ambient humidity range | Operating/Storage: 35% to 95% | Operating/Storage: 35% to 95% | |
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | ||
| Voltage influence | ±2.5% max. of sensing distance at rated voltage at rated voltage ±10% | ||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
| Dielectric strength | 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case | ||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | ||
| Degree of protection | IP64 (IEC) | IP66 (IEC) | |
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
| Weight (packed state) | Approx. 35 g | ||
| Materials | Case | Heat-resistant ABS | |
| Sensing surface | |||
| Accessories | Adjustment screwdriver, Instruction manual | ||
* The value for the E2K-F10MC[]-A is when it is adjusted to 10 mm.
Kích thước
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
E2K-F
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | E2K-F |  |
Hãy là người đầu tiên nhận xét “Cảm biến điện dung Omron E2K-F”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.