• HOTLINE: 0978 63 73 78
  • Email: vpevpe9@gmail.com
    • HOTLINE: 0978 63 73 78

    Cảm biến khuếch đại sợi quang Omron E3X-SD

    Liên hệ

    phone
    Liên hệ :
    08 88 44 88 99
    phone
    Liên hệ :
    0978 63 73 78
    phone
    Liên hệ :
    0909 63 73 78

    Liên Hệ Tư Vấn




    Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
    Danh mục: , ,

    GIGA RAY đã cài đặt

    Nhận ra sức mạnh và độ chính xác cao nhất trên thế giới.
    Có khả năng phát hiện ổn định trong môi trường bụi, dầu hoặc các vật thể nhỏ.

    Tính năng E3X-SD / NA 2

    Hoạt động dễ dàng

    Đã cài đặt Quick-Tuning

    Chỉ bằng thao tác nhấp hai lần, cảm biến sẽ tối ưu hóa cường độ ánh sáng và tự động đặt giá trị ngưỡng.
    Nó cũng hữu ích khi cường độ ánh sáng đạt đến mức bão hòa.

    Tính năng E3X-SD / NA 4

    Một phím = Một chức năng

    Thao tác dễ dàng bằng ‘Một phím = Một chức năng’ và các nút ‘Lớn’ thoải mái. Không phức tạp.

    Mô hình kỹ thuật số

    Tính năng E3X-SD / NA 6

    Mô hình cài đặt điều chỉnh và hiển thị thanh

    Tính năng E3X-SD / NA 7

    Đặc điểm

    Fiber Amplifier Units

    Digital Display and Direct Key Setting

     

    ItemAppearanceConnection methodRatings and
    Specifications    		Model
    NPN outputPNP output
    Standard models
    		Pre-wired (2 m)—E3X-SD21 2ME3X-SD51 2M
    		Wire-saving connectorE3X-SD7E3X-SD9

    *An Amplifier Unit Connector (sold separately) is required.

     

    Bar Display and Adjuster Setting

     

    ItemAppearanceConnection methodRatings and
    Specifications    		Model
    NPN outputPNP output
    Standard models
    		Pre-wired (2 m)—E3X-NA11 2ME3X-NA41 2M
    		Wire-saving connectorE3X-NA6E3X-NA8
    High-speed
    detection models
    		Pre-wired (2 m)Response time:
    20 μs    		E3X-NA11F 2ME3X-NA41F 2M
    Water-resistant
    models
    		Pre-wired (2 m)Degree of
    protection: IP66    		E3X-NA11V 2ME3X-NA41V 2M
    		Connector (M8)E3X-NA14VE3X-NA44V
    *1. An Amplifier Unit Connector (sold separately) is required.
    *2. A Sensor I/O Connector (sold separately) is required.

     

    Accessories (sold separately)

    Amplifier Unit Connectors (Required for models for Wire-saving Connectors.)

    Note: Protective seals provided.

    ItemAppearanceCable lengthNo. of conductorsModel
    Master Connector
    		2 m3E3X-CN11
    Slave Connector
    		1E3X-CN12

     

    Ordering Precautions for Amplifier Units Connectors

    A Connector is not provided with the Amplifier Unit.
    Refer to the tables at the right when placing an order.

     

    Fiber Amplifier UnitsApplicable Connectors (sold separately)
    TypeNPNPNPMaster ConnectorSlave Connector
    Standard modelsE3X-SD7E3X-SD9E3X-CN11 (3-wire)E3X-CN12 (1-wire)
    E3X-NA6E3X-NA8

     

    When Using 5 Amplifier Units

     

    5 Fiber Amplifier Units+1 Master Connector + 4 Slave Connectors

     

    Sensor I/O Connectors (Required for models with M8 Connectors.)

    (Models for Connectors: A Connector is not provided with the Amplifier Unit. Be sure to order a Connector separately.)

    SizeCable specificationsAppearanceCable typeModel
    M8Standard cableStraight connector
    		2 mFour-conductor cableXS3F-M421-402-A
    5 mXS3F-M421-405-A
    L-shaped connector
    		2 mXS3F-M422-402-A
    5 mXS3F-M422-405-A

     

    Mounting Brackets

    A Mounting Bracket is not provided with the Fiber Amplifier Unit. Order a Mounting Bracket separately if required.

    AppearanceApplicable modelsModelQuantity
    		E3X-SD[] E3X-NA[] E3X-NA[]FE39-L1431
    		E3X-NA[]VE39-L148

     

    End Plate

    End Plates are not provided with the Fiber Amplifier Unit. Order End Plates separately if required.

    AppearanceModelQuantity
    		PFP-M1

    Thông số kỹ thuật

    Fiber Amplifier Units

     

    TypeDigital display and direct key
    setting    		Bar display and adjuster setting
    Standard modelsStandard
    models    		High-speed
    detection
    models    		Water-resistant
    models
    ModelE3X-SD[]E3X-NA[]E3X-NA[]FE3X-NA[]V
    Light source
    (wavelength)    		Red, 4-element LED (625 nm)Red,
    4-element
    LED (624 nm)    		Red,
    4-element
    LED (625 nm)    		Red LED (680 nm)
    Power supply voltage12 to 24 VDC ±10%, ripple (p-p): 10% max.
    Power consumption/
    Current consumption    		At Power Supply Voltage of 24 VDC
    960 mW max./40 mA max.
    At Power Supply Voltage of 12 VDC
    960 mW max./80 mA max.    		At Power Supply Voltage of 24 VDC
    840 mW max./35 mA max.
    At Power Supply Voltage of 12 VDC
    420 mW max./35 mA max.
    Control outputOpen-collector output (NPN or PNP)
    Load power supply: 26.4 V max.,
    Load current: 50 mA max.
    (Residual voltage: 1.5 V max.)
    Light-ON/Dark-ON mode selector    		Open-collector output (NPN or PNP)
    Load power supply: 26.4 V max.,
    Load current: 50 mA max.
    (Residual voltage: 1 V max.)
    Light-ON/Dark-ON mode selector.
    Response timeOperate or reset: 200 μs max. *1Operate:
    20 μs max.
    Reset:
    30 μs max.    		Operate or reset:
    200 μs max. *1
    Sensitivity adjustmentUP/DOWN direct key setting,
    teaching with/without a workpiece,
    automatic teaching    		8-turn sensitivity adjuster (with indicator)
    Protection circuitsPower supply reverse polarity
    protection,
    output short-circuit protection,
    output reverse polarity protection    		Power supply reverse polarity protection,
    output short-circuit protection
    Timer function—No timer, OFF-delay timer; or Timer selector
    (timer time: 40 ms (fixed))
    Mutual interference
    prevention    		Up to 5 Amplifiers (optically synchronized) *2NoneUp to 5 Amplifiers
    (optically
    synchronized) *2
    Ambient illuminationReceiver side
    Incandescent lamp: 10,000 lux max.
    Sunlight: 20,000 lux max.
    Number of gang-
    mounted Amplifiers    		16 max. (The ambient temperature specification depends on the number of gang-mounted
    Amplifiers.)
    Ambient temperature
    range    		Operating: Groups of 1 to 3 Amplifiers: – 25 °C to 55 °C
    Groups of 4 to 11 Amplifiers: – 25 °C to 50 °C
    Groups of 12 to 16 Amplifiers: – 25 °C to 45 °C
    Storage: – 30 °C to 70 °C (with no icing or condensation)
    Ambient humidity rangeOperating and storage: 35% to 85%
    (with no condensation)    		Operating: 35% to 85%
    Storage: 35% to 95%
    (with no condensation)
    Insulation resistance20 MΩ. min. (at 500 VDC)
    Dielectric strength1,000 VAC at 50/60 Hz for 1 minute *3
    Vibration resistanceDestruction: 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y and Z
    directions
    Shock resistanceDestruction: 500 m/s2, for 3 times each in X, Y and Z directions
    Degree of protectionIEC 60529 IP50 (with Protective Cover attached)IEC 60529 IP66
    (with Protective
    Cover attached)
    Connection methodPre-wired (standard cable length: 2 m), or connector
    Weight (packed state) *4Pre-wired model: Approx. 100 g, Model with connector: Approx. 55 g
    MaterialCasePolybutylene terephthalate (PBT)
    CoverPolycarbonate (PC)Polyethersulfone
    (PES)
    AccessoriesInstruction manual

     

    Amplifier Unit Connectors (Wire-saving Connectors)

     

    ModelE3X-CN11E3X-CN12
    Rated current2.5 A
    Rated voltage50 V
    Contact resistance20 mΩ max. (20 mVDC max., 100 mA max.)
    (The above figure is for connection to the Fiber Amplifier Unit and the adjacent Connector. It
    does not include the conductor resistance of the cable.)
    Number of insertionsDestruction: 50 times (for connection to the Fiber Amplifier Unit and the adjacent Connector)
    MaterialHousingPolybutylene terephthalate (PBT)
    ContactPhosphor bronze/gold-plated nickel
    Weight (packed state)Approx. 55 gApprox. 25 g

     

    Sensing distance

    Threaded Models

     

    Detection methodSensing directionSizeModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beamRight-angleM4E32-T11N 2M530160280
    E32-LT11N 2M1,800600900
    StraightE32-T11R 2M560160280
    E32-LT11 2M2,1007001,050
    E32-LT11R 2M1,800600900
    ReflectiveRight-angleM3E32-C31N 2M257.513
    E32-C21N 2M652132
    M4E32-D21N 2M1705685
    M6E32-C11N 2M1705085
    E32-LD11N 2M1705685
    StraightM3E32-D21R 2M301015
    E32-C31 2M802640
    E32-C31M 1M
    M4E32-D211R 2M301015
    M6E32-D11R 2M1806090
    E32-CC200 2M300100150
    E32-LD11 2M1806090
    E32-LD11R 2M1705685

     

    Cylindrical Models

     

    Detection methodSizeSensing directionModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beam1 dia.Top-viewE32-T223R 2M1203660
    1.5 dia.E32-T22B 2M20060100
    3 dia.E32-T12R 2M560160280
    Side-viewE32-T14LR 2M22066110
    Reflective1.5 dia.Top-viewE32-D22B 2M301015
    1.5 dia. + 0.5 dia.E32-D43M 1M623
    3 dia.E32-D22R 2M301015
    E32-D221B 2M702035
    E32-D32L 2M1605080
    3 dia. + 0.8 dia.E32-D33 2M16410

     

    Flat Models

     

    Detection methodSensing directionModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beamTop-viewE32-T15XR 2M560160280
    Side-viewE32-T15YR 2M22066110
    Flat-viewE32-T15ZR 2M
    ReflectiveTop-viewE32-D15XR 2M1806090
    Side-viewE32-D15YR 2M401020
    Flat-viewE32-D15ZR 2M

     

    Sleeve Models

     

    Detection methodSensing directionModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beamSide-viewE32-T24R 2M601830
    E32-T24E 2M1803660
    Top-viewE32-T21-S1 2M1304365
    E32-T33 1M4013.520
    E32-TC200BR 2M560160280
    ReflectiveSide-viewE32-D24R 2M144.67
    E32-D24-S2 2M26813
    Top-viewE32-D43M 1M623
    E32-D331 2M311.5
    E32-D33 2M16410
    E32-D32-S1 0.5M1447
    E32-D31-S1 0.5M
    E32-DC200F4R 2M301015
    E32-D22-S1 2M571928
    E32-D21-S3 2M
    E32-DC200BR 2M1806090
    E32-D25-S3 2M571928

     

    Small-spot, Reflective

     

    TypeSpot
    diameter    		Center distance
    (mm)    		ModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Variable
    spot    		0.1 to
    0.6 dia.    		6 to 15E32-C42 1M + E39-F3ASpot diameter of 0.1 to 0.6 mm at 6 to 15 mm.
    0.3 to
    1.6 dia.    		10 to 30E32-C42 1M + E39-F17Spot diameter of 0.3 to 1.6 mm at 10 to 30 mm.
    Parallel
    light    		4 dia.0 to 20E32-C31 2M + E39-F3CSpot diameter of 4 mm max. at 0 to 20 mm.
    E32-C31N 2M + E39-F3C
    Integrated
    lens    		0.1 dia.5E32-C42S 1MSpot diameter of 0.1 mm at 5 mm.
    6 dia.50E32-L15 2MSpot diameter of 6 mm at 50 mm.
    Small-
    spot    		0.1 dia.7E32-C41 1M + E39-F3A-5Spot diameter of 0.1 mm at 7 mm.
    0.5 dia.E32-C31 2M + E39-F3A-5Spot diameter of 0.5 mm at 5 mm.
    E32-C31N 2M + E39-F3A-5
    0.2 dia.17E32-C41 1M + E39-F3BSpot diameter of 0.2 mm at 17 mm.
    0.5 dia.E32-C31 2M + E39-F3BSpot diameter of 0.5 mm at 17 mm.
    E32-C31N 2M + E39-F3B
    3 dia.50E32-CC200 2M + E39-F18Spot diameter of 3 mm at 50 mm.
    E32-C11N 2M + E39-F18

     

    High-power Beam

     

    TypeSensing
    direction    		Aperture
    angle    		ModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beam
    Integrated lens    		Right-angle15°E32-LT11N 2M1,800600900
    Top-view10°E32-T17L 10M20,000 *18,40014,000
    15°E32-LT11 2M2,1007001,050
    15°E32-LT11R 2M1,800600900
    Side-view30°E32-T14 2M3,6001,0801,800
    Through-beam
    models with
    lenses    		Right-angle12°E32-T11N 2M + E39-F13,7001,1102,100
    6°E32-T11N 2M + E39-F164,000 *22,0003,600
    Top-view12°E32-T11R 2M + E39-F14,000 *21,2602,100
    6°E32-T11R 2M + E39-F164,000 *22,0003,600
    Side-view60°E32-T11R 2M + E39-F2440130220
    Top-view12°E32-T11 2M + E39-F14,000 *21,2002,000
    6°E32-T11 2M + E39-F164,000 *22,6004,000 *2
    Side-view60°E32-T11 2M + E39-F2720200360
    Top-view12°E32-T51R 2M + E39-F12,0007201,650
    6°E32-T51R 2M + E39-F164,000 *21,5602,900
    Side-view60°E32-T51R 2M + E39-F2360120200
    Top-view12°E32-T81R-S 2M + E39-F11,8006301,100
    6°E32-T81R-S 2M + E39-F164,000 *21,3002,300
    Side-view60°E32-T81R-S 2M + E39-F228084140
    Top-view12°E32-T61-S 2M + E39-F14,000 *21,8003,000
    6°E32-T61-S 2M + E39-F164,000 *22,3403,900
    Side-view60°E32-T61-S 2M + E39-F2780260390
    Top-view12°E32-T51 2M + E39-F1-332,4007201,400
    6°E32-T51 2M + E39-F164,000 *23,1204,000 *2
    Reflective
    Integrated lens    		Top-view4°E32-D16 2M80014040 to 400

     

    Narrow View

     

    Detection methodSensing
    direction    		Aperture angleModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beamSide-view1.5°E32-A03 2M890267445
    E32-A03-1 2M
    3.4°E32-A04 2M340102170
    4°E32-T24SR 2M1170360600
    E32-T24S 2M1400420700
    E32-T22S 2M20006001000

     

    Detection without Background Interference

     

    Detection
    method    		Sensing
    direction    		ModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Limited-
    reflective    		Flat-viewE32-L16-N 2M0 to 150 to 120 to 15
    E32-L24S 2M0 to 4
    Side-viewE32-L25L 2M5.4 to 9 (center 7.2)5.4 to 8 (center 7.2)5.4 to 9 (center 7.2)

     

    Transparent Object Detection (Retro-reflective)

     

    Detection
    method    		FeatureSizeModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Retroreflective
    Sensors    		Film detectionM3E32-C31 2M +
    E39-F3R + E39-RP37    		2205075
    Square–E32-R16 2M1,5001,000150 to 1,500
    Threaded ModelsM6E32-R21 2M10 to 25025010 to 250
    Hex-shapedE32-LR11NP 2M +
    E39-RP1    		600200300

     

    Transparent Object Detection (Limited-reflective)

     

    Detection
    method    		FeatureSensing
    direction    		ModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Retro-
    reflective    		Small sizeFlat-viewE32- L24S 2M0 to 4
    StandardE32-L16-N 2M0 to 150 to 120 to 15
    Glass substrate
    alignment, 70°C    		E32-A08 2M10 to 20
    Standard/
    long-distance    		E32-A12 2M12 to 30––
    Side view formSide-viewE32-L25L 2M5.4 to 9
    (center 7.2)    		5.4 to 8
    (center 7.2)    		5.4 to 9
    (center 7.2)
    Glass substrate
    mapping, 70°C    		Top-viewE32-A09 2M15 to 38 (center 25)

     

    Chemical-resistant, Oil-resistant

     

    Detection
    method    		TypeSensing
    direction    		ModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-
    beam    		Oil-resistantRight-angleE32-T11NF 2M4,000 *1,4002,400
    Chemical/
    oil-resistant    		Top-viewE32-T12F 2M3,2009601,600
    E32-T11F 2M2,1007601,050
    Side-viewE32-T14F 2M400120200
    Chemical/oil-
    resistant at 150°C    		Top-viewE32-T51F 2M1,400400700
    ReflectiveSemiconductors:
    Cleaning, developing,
    and etching; 60°C    		Top-viewE32-L11FP 2M8 to 20 mm from tip of lens (Recommended sensing
    distance: 11 mm), 19 to 31 mm from center of
    mounting hole A (Recommended sensing distance:
    22 mm)
    Semiconductors:
    Resist stripping;
    85°C    		E32-L11FS 2M8 to 20 mm from tip of lens (Recommended sensing
    distance: 11 mm), 32 to 44 mm from center of
    mounting hole A (Recommended sensing distance:
    35 mm)
    Chemical/
    oil-resistant    		E32-D12F 2M1003250
    Chemical-resistant
    cable    		E32-D11U 2M1806090

    *The fiber length is 2 m on each side, so the sensing distance is given as 4,000 mm.

     

    Bending-resistant

     

    Detection methodSizeModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beam1.5 dia.E32-T22B 2M20060100
    M3E32-T21 2M
    M4E32-T11 2M720200360
    SquareE32-T25XB 2M1504075
    Reflective1.5 dia.E32-D22B 2M301015
    M3E32-D21 2M
    3 dia.E32-D221B 2M702035
    M4E32-D21B 2M
    M6E32-D11 2M1806090
    SquareE32-D25XB 2M501625

     

    Heat-resistant

     

    Detection methodHeat-resistant temperatureModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beam100°CE32-T51R 2M400120225
    150°CE32-T51 2M800240400
    200°CE32-T81R-S 2M360100180
    350°CE32-T61-S 2M600180300
    Reflective100°CE32-D51R 2M1404270
    150°CE32-D51 2M24080120
    200°CE32-D81R 2M902745
    300°CE32-A08H2 2M10 to 20
    E32-A09H2 2M20 to 30 (center 25)
    350°CE32-D61 2M902745
    400°CE32-D73 2M601830

     

    Area Beam

     

    Detection methodTypeSensing widthModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beamArea11 mmE32-T16PR 2M800260450
    E32-T16JR 2M700220390
    30 mmE32-T16WR 2M1380400690
    ReflectiveArray11 mmE32-D36P1 2M1505075

     

    Liquid-level Detection

     

    Detection
    method    		Pipe
    diameter    		FeatureModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Tube-mounting3.2/6.4/
    9.5 dia.    		Stable residual
    quantity detection    		E32-A01 5MApplicable tube: Transparent tube with a diameter
    of 3.2, 6.4, or 9.5 mm, Recommended wall
    thickness: 1 mm
    8 to 10 dia.Mounting at multi
    levels    		E32-L25T 2MApplicable tube: Transparent tube with a diameter
    of 8 to 10 mm, Recommended wall thickness:
    1 mm
    No re-
    strictions    		Large tubesE32-D36T 2MApplicable tube: Transparent tube (no restrictions
    on diameter)
    Liquid contact
    (heat-resistant
    up to 200°C)    		––E32-D82F1 4MLiquid-contact model

     

    Vacuum-resistant

     

    Detection methodHeat-resistant
    temperature    		ModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Through-beam120°CE32-T51V 1M200–100
    E32-T51V 1M + E39-F1V1200–600
    200°CE32-T84SV 1M500–250

     

    FPD, Semiconductors, and Solar Cells

     

    Detection
    method    		ApplicationOperating
    temperature    		ModelSensing distance (mm)
    E3X-SD[] E3X-NA[]E3X-NA[]FE3X-NA[]V
    Limited-
    reflective    		Glass presence
    detection    		70°CE32-L16-N 2M0 to 150 to 120 to 15
    Glass substrate
    alignment    		E32-A08 2M10 to 20
    300°CE32-A08H2 2M
    70°CE32-A12 2M12 to 30––
    Glass substrate
    mapping    		E32-A09 2M15 to 38 (center 25)
    300°CE32-A09H2 2M20 to 30 (center 25)
    Wet processes:
    Cleaning, Resist
    developing and
    etching    		60°CE32-L11FP 2M8 to 20 mm from tip of lens (Recommended sensing
    distance: 11 mm), 19 to 31 mm from center of
    mounting hole A (Recommended sensing distance:
    22 mm)
    Wet process:
    Resist stripping    		85°CE32-L11FS 2M8 to 20 mm from tip of lens (Recommended sensing
    distance: 11 mm), 32 to 44 mm from center of
    mounting hole A (Recommended sensing distance:
    35 mm)
    Through-
    beam    		Wafer mapping70°CE32-A03 2M890267445
    E32-A03-1 2M
    E32-A04 2M340102170
    E32-T24SR 2M1170360600
    E32-T24S 2M1400420700

    Kích thước

    Fiber Amplifier Units

    Amplifier Units with Cables
    E3X-SD21, E3X-SD51
    E3X-NA11, E3X-NA11F
    E3X-NA41, E3X-NA41F

    E3X-SD / NA Dimensions 2

    Please click image to enlarge (open in a new window).

     

    * There is no hole for E3X-NA[]F models.

    Note: When using E39-L143 Mounting Brackets, there will be small gaps between the Fiber Amplifier Units if they are
    mounted side by side.

     

    Amplifier Units with Connectors
    E3X-SD7, E3X-SD9
    E3X-NA6, E3X-NA8

    E3X-SD / NA Dimensions 3

    Please click image to enlarge (open in a new window).

     

    Note: When using E39-L143 Mounting Brackets, there will be small gaps between the Fiber Amplifier Units if they are
    mounted side by side.

     

    Amplifier Units with Cables, Water-resistant Models
    E3X-NA11V
    E3X-NA41V

    E3X-SD / NA Dimensions 4

    Please click image to enlarge (open in a new window).

    Amplifier Units with Connectors, Water-resistant Models
    E3X-NA14V
    E3X-NA44V

    E3X-SD / NA Dimensions 5

    Please click image to enlarge (open in a new window).

    Amplifier Unit Connectors (Wire-saving Connectors)

    Master Connector
    E3X-CN11

    E3X-SD / NA Dimensions 7

     

    * E3X-CN11: 4 dia. cable/3 conductors/Standard length: 2 m (Conductor cross section: 0.2 mm2 (AWG24), Insulator
    diameter: 1.1 mm)

     

    Slave Connector
    E3X-CN12

    E3X-SD / NA Dimensions 8

     

    * E3X-CN12: 2.6 dia. cable/1 conductor/Standard length: 2 m (Conductor cross section: 0.2 mm2 (AWG24), Insulator
    diameter: 1.1 mm)

     

    Accessories (sold separately)

    Mounting Brackets
    E39-L143

    E3X-SD / NA Dimensions 10

    Material: Stainless steel (SUS304)

    End Plates
    PFP-M

    E3X-SD / NA Dimensions 11

    Đánh giá

    Chưa có đánh giá nào.

    Hãy là người đầu tiên nhận xét “Cảm biến khuếch đại sợi quang Omron E3X-SD”

    SẢN PHẨM LIÊN QUAN

    Cảm biến khuếch đại sợi quang Omron E3X-ZD

    Liên hệ

    Cảm biến quang điện Omron E3C-LD11N

    Liên hệ

    Cảm biến quang điện Omron E3C-LDA21N

    Liên hệ

    Bộ khuếch đại Omron E3C-VS

    Liên hệ

    Bộ khuếch đại sợi quang Omron E3NX-MA

    Liên hệ

    Bộ mã hóa vòng quay Omron E6B2-C

    Liên hệ

    Bộ khuếch đại sợi quang Omron E3NX-FA

    Liên hệ

    Cảm biến khuếch đại sợi quang Omron E32-L11FP

    Liên hệ
    xem thêm
    Liên hệ nhanh