Cảm biến phân tán Omron E3NW

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: BỘ KHUẾCH ĐẠI SỢI QUANG, CẢM BIẾN SỢI QUANG, OMRON

Giảm triệt để chi phí sản xuất

Ngay cả khi bạn triển khai Mạng cảm biến, chi phí giới thiệu sẽ giảm đáng kể.

Vui lòng nhấp vào hình ảnh để phóng to (mở trong một cửa sổ mới).

Giảm đáng kể chi phí giới thiệu so với các mạng cảm biến trước đây

Vui lòng nhấp vào hình ảnh để phóng to (mở trong một cửa sổ mới).

vận hành

Giảm triệt để thời gian vận hành hệ thống

Cài đặt hàng loạt dễ dàng từ Bảng điều khiển cảm ứng

Vui lòng nhấp vào hình ảnh để phóng to (mở trong một cửa sổ mới).

Chuyển đổi dòng cũng dễ dàng với chức năng sao lưu thiết lập

Vui lòng nhấp vào hình ảnh để phóng to (mở trong một cửa sổ mới).

Hoạt động

Tăng năng suất máy một cách triệt để

Giám sát để bảo trì dự đoán

Vui lòng nhấp vào hình ảnh để phóng to (mở trong một cửa sổ mới).

Bạn có thể sử dụng giao tiếp E3NW để tạo chương trình điều khiển hoặc màn hình bảng cảm ứng để thực hiện tất cả các cài đặt và giám sát được mô tả trên Catalog.
Có sẵn các mẫu hiển thị cho Thiết bị đầu cuối có thể lập trình sê-ri OMRON NS (bảng cảm ứng) và lập trình mẫu cho Bộ điều khiển sê-ri OMRON NJ.
Để biết chi tiết, vui lòng liên hệ với đại diện bán hàng OMRON của bạn.

Giảm thời gian ngừng hoạt động khi xảy ra sự cố

Vui lòng nhấp vào hình ảnh để phóng to (mở trong một cửa sổ mới).

Đặc điểm

Communications method and Unit appearance		Model
EtherCAT		E3NW-ECT
CompoNet		E3NW-CRT
CC-Link		E3NW-CCL

Distributed Sensor Unit

Appearance	Model
	E3NW-DS

Note: Use the following DS-Bus communication cable (recommended) when connecting a sensor communications unit and a distributed sensor unit.

Item	Manufacturer	Model
Communication cable	BANDO DENSEN Co., Ltd.	ESVC 0.5X2C, black

Connectable Sensor Amplifier Units

Type	Model
Smart Fiber Amplifier Unit	E3NX-FA0
Smart Fiber Amplifier Unit (Infrared models)	*E3NX-FAH0 1**
Smart Fiber Amplifier Unit (2-channel models)	*E3NX-MA0 1**
Color Fiber Amplifier Unit	*E3NX-CA0 1 2*
Smart Laser Amplifier Unit	E3NC-LA0
Smart Laser Amplifier Unit (CMOS type)	E3NC-SA0
Smart Proximity Amplifier Unit	*E2NC-EA0 1**
	*E2NC-EA10 1**
	*E2NC-EA40 1**
Contact-Type Smart Amplifier Unit	*E9NC-TA0 1**

*1. E3NW-CRT Sensor Communications Units (CompoNet) cannot be used.
*2. E3NW-CCL Sensor Communications Units (CC-Link) cannot be used.

Connector cover for Sensor Communications Unit and Distributed Sensor Unit (provided)

Order a Cover when required, e.g., if you lose the covers.

Model
E39-G27

Thông số kỹ thuật

Sensor Communications Unit

EtherCAT

Model	E3NW-ECT
Connectable Sensor Amplifier Units	N-Smart Smart Fiber Amplifier Unit: E3NX-FA0 Smart Fiber Amplifier Unit (Infrared models): E3NX-FAH0 Smart Fiber Amplifier Unit (2-channel models): E3NX-MA0 Color Fiber Amplifier Unit: E3NX-CA0 1 Smart Laser Amplifier Unit: E3NC-LA0 Smart Laser Amplifier Unit (CMOS type): E3NC-SA0 Smart Proximity Amplifier Unit: E2NC-EA0 E2NC-EA10 E2NC-EA40 Contact-Type Smart Amplifier Unit: E9NC-TA0 2
Power supply voltage	24 VDC (20.4 to 26.4 V)
Power and current consumption	2.4 W max. (Not including the power supplied to Sensors.), 100 mA max. (Not including the current supplied to Sensors.)
Indicators	L/A IN indicator (green), L/A OUT indicator (green), PWR indicator (green), RUN indicator (green), ERROR indicator (red), and SS (Sensor Status) indicator (green/red)
Vibration resistance (destruction)	10 to 60 Hz with a 0.7-mm double amplitude, 50 m/s² at 60 to 150 Hz, for 1.5 hours each in X, Y, and Z directions
Shock resistance (destruction)	150 m/s² for 3 times each in X, Y, and Z directions
Ambient temperature range	Operating: 0 to 55°C; *3 Storage: -30 to 70°C (with no icing or condensation)
Ambient humidity range	Operating and storage: 25% to 85% (with no condensation)
*Maximum connectable Sensors 3 4*	30 (when connected to an OMRON NJ-series Controller, 16 for E2NC-EA10/ EA40)
Maximum connectable Distributed Sensor Units	8
Insulation resistance	20 MΩ min. (at 500 VDC)
Dielectric strength	500 VAC at 50/60 Hz for 1 min
Mounting method	35-mm DIN track – mounting
Weight (packed state/Unit only)	Approx. 185 g/approx. 95 g
Materials	Polycarbonate
Accessories	Power supply connector, communications connector for E3NW-DS connection, DIN Track End Plates (2 pieces), and instruction manual

*1. The E3NX-CA0 is supported for firmware version 1.06 or higher (Sensor Communications Units manufactured in
June 2016 or later).
*2. The E9NC-TA0 is supported for firmware version 1.03 or higher (Sensor Communications Units manufactured in
July 2014 or later).
*3. Temperature Limitations Based on Number of Connected Amplifier Units:
Groups of 1 or 2 Amplifier Units: 0 to 55°C, Groups of 3 to 10 Amplifier Units: 0 to 50°C, Groups of 11 to 16 Amplifier
Units: 0 to 45°C, Groups of 17 to 30 Amplifier Units: 0 to 40°C
*4. This is the total number of Sensors that can be connected to the Sensor Communications Unit and Distributed Sensor
Units.

Communications Specifications

Item	Specification
Communications protocol	Dedicated protocol for EtherCAT
Modulation	Baseband method
Baud rate	100 Mbps
Physical layer	100BASE-TX (IEEE 802.3u)
Topology	Daisy chain
Communications media	STP category 5 or higher
Communications distance	Distance between nodes: 100 m max.
Noise immunity	Conforms to IEC 61000-4-4, 1 kV or higher
Node address setting method	Set with decimal rotary switches or software *1
Node address range	000 to 192 *2

*1. The software setting is used when the node address setting switches are set to 0.
*2. The range depends on the EtherCAT master that is used. Refer to the E3NW-ECT EtherCAT Digital Sensor
Communications Unit Operation Manual (Cat. No. E429) for details.

CompoNet

Model	E3NW-CRT
Connectable Sensor Amplifier Units	N-Smart Smart Fiber Amplifier Unit: E3NX-FA0 Smart Laser Amplifier Unit: E3NC-LA0 Smart Laser Amplifier Unit (CMOS type): E3NC-SA0
Power supply voltage	14 to 26.4 VDC
Power and current consumption	At 24 VDC 1.7 W max. (Not including the power supplied to Sensors.), 70 mA max. (Not including the current supplied to Sensors.)
Indicators	MS (Machine Status) indicator (green/red), NS (Network Status) indicator (green/red), and SS (Sensor Status) indicator (green/red)
Vibration resistance (destruction)	10 to 60 Hz with a 0.7-mm double amplitude, 50 m/s² at 60 to 150 Hz, for 1.5 hours each in X, Y, and Z directions
Shock resistance (destruction)	150 m/s² for 3 times each in X, Y, and Z directions
Ambient temperature range	Operating: 0 to 55°C; *1 Storage: -30 to 70°C (with no icing or condensation)
Ambient humidity range	Operating and storage: 25% to 85% (with no condensation)
*Maximum connectable Sensors 1**	16 *2
Maximum connectable Distributed Sensor Units	8
Insulation resistance	20 MΩ min. (at 500 VDC)
Dielectric strength	500 VAC at 50/60 Hz for 1 min
Mounting method	35-mm DIN track – mounting
Weight (packed state/Unit only)	Approx. 165 g/approx. 70 g
Materials	Polycarbonate
Accessories	Communications connector for E3NW-DS connection, DIN Track End Plates (2 pieces), and instruction manual

*1. Temperature Limitations Based on Number of Connected Amplifier Units:
Groups of 1 or 2 Amplifier Units: 0 to 55°C, Groups of 3 to 10 Amplifier Units: 0 to 50°C, Groups of 11 to 16 Amplifier
Units: 0 to 45°C
*2. This is the total number of Sensors that can be connected to the Sensor Communications Unit and Distributed Sensor
Units.

Communications Specifications

Item	Specifications
Communications method	Dedicated protocol for CompoNet
Types of communications	Remote I/O communications (program-free, constant sharing of data) and message communications (explicit message communications as required)
Baud rate	4 Mbps, 3 Mbps, 1.5 Mbps, 93.75 kbps
Modulation	Baseband method
Coding	Manchester code
Error control	Manchester encoding rules and CRC
Communications media	The following media can be used. Round Cable I Round Cable II Flat Cable I (DCA4-4F10 Standard Flat Cable) Flat Cable II (DCA5-4F10 Sheathed Flat Cable) Note: Round Cable I, Round Cable II, Flat Cable I, and Flat Cable II cables are all treated as different types of cables. When two or more types of cables are used in a single network, a Repeater Unit must be used to separate any two different types of cables between the trunk line and a sub-trunk line.
Communications distance and wiring	Refer to 1-2-1 Cable Types, Maximum Distances, and Number of Slave Units in the CompoNet Master Units Operation Manual (Cat. No. W456).
Signal lines	Two lines: BDH (communications data high) and BDL (communications data low)
Power lines	Two lines: BS+ and BS- (power for communications and internal Slave Unit circuits) Power is supplied from the Master Unit or Repeater Unit.
Connection forms	Round Cable II, Flat Cable I, or Flat Cable II at a baud rate of 93.75 kbps: No restrictions Other cables or baud rates: Trunk line and branch lines
Connection forms	Connections for Slave Units and Repeater Units: T-branch or multidrop connections
Noise immunity	Conforms to IEC 61000-4-4, 1 kV or higher
Address setting method	Decimal rotary address switch
Address range	0 to 62

CC-Link

Model	E3NW-CCL
Connectable Sensor Amplifier Units	N-Smart Smart Fiber Amplifier Unit: E3NX-FA0 Smart Fiber Amplifier Unit (Infrared models): E3NX-FAH0 Smart Fiber Amplifier Unit (2-channel models): E3NX-MA0 Smart Laser Amplifier Unit: E3NC-LA0 Smart Laser Amplifier Unit (CMOS type): E3NC-SA0 Smart Proximity Amplifier Unit: E2NC-EA0 E2NC-EA10 E2NC-EA40 Contact-Type Smart Amplifier Unit: E9NC-TA0 *1
Power supply voltage	24 VDC (20.4 to 26.4 V)
Power and current consumption	2.4 W max. (Not including the power supplied to Sensors.), 100 mA max. (Not including the current supplied to Sensors.)
Indicators	RUN indicator (green), ERROR indicator (red), and SS (Sensor Status) indicator (green/red)
Vibration resistance (destruction)	10 to 60 Hz with a 0.7-mm double amplitude, 50 m/s² at 60 to 150 Hz, for 1.5 hours each in X, Y, and Z directions
Shock resistance (destruction)	150 m/s² for 3 times each in X, Y, and Z directions
Ambient temperature range	Operating: 0 to 55°C; *2 Storage: -30 to 70°C (with no icing or condensation)
Ambient humidity range	Operating and storage: 25% to 85% (with no condensation)
*Maximum connectable Sensors 2**	16 *3
Maximum connectable Distributed Sensor Units	8
Insulation resistance	20 MΩ min. (at 500 VDC)
Dielectric strength	500 VAC at 50/60 Hz for 1 min
Mounting method	35-mm DIN track – mounting
Weight (packed state/Unit only)	Approx. 180 g/approx. 80 g
Materials	Polycarbonate
Accessories	Power Supply Connector, E3NW-DS Communications Connector, Network Connectors (2), DIN Track End Plates (2), and Instruction Manual

*1. The E9NC-TA0 is supported for firmware version 1.03 or higher (Sensor Communications Units manufactured in
July 2014 or later).
*2. Temperature Limitations Based on Number of Connected Amplifier Units:
Groups of 1 or 2 Amplifier Units: 0 to 55°C, Groups of 3 to 10 Amplifier Units: 0 to 50°C, Groups of 11 to 16 Amplifier
Units: 0 to 45°C
*3. This is the total number of Sensors that can be connected to the Sensor Communications Unit and Distributed Sensor
Units.

Communications Specifications

Item	Specifications
Communications protocol	Dedicated protocol for CC-Link
Communications method	Broadcast polling
Baud rate	10 Mbps/5 Mbps/2.5 Mbps/625 kbps/156 kbps
Physical layer	Bus (based on EIA RS485)
Topology	Daisy chain (T-branching can be used.)
Communications media	CC-Link Cables
Communications distance	Cable length between nodes: 20 cm min. Maximum total cable length Baud rate of 156 kbps: 1,200 m Baud rate of 625 kbps: 900 m Baud rate of 2.5 Mbps: 400 m Baud rate of 5 Mbps: 160 m Baud rate of 10 Mbps: 100 m
Noise immunity	Conforms to IEC 61000-4-4, 1 kV or higher
Address setting method	Decimal rotary address switch
Address range	64 max. *
Synchronization mode	Cyclic transmissions (synchronization)

* The range depends on the CC-Link master that is used. Refer to 5-3-2 Node Setting Switches in the E3NW-CCL CC-
Link Digital Sensor Communications Unit Operation Manual (Cat. No. E431) for details.

Distributed Sensor Unit

Model	E3NW-DS
Connectable Sensor Amplifier Units	N-Smart Smart Fiber Amplifier Unit: E3NX-FA0 Smart Fiber Amplifier Unit (Infrared models): E3NX-FAH0 Smart Fiber Amplifier Unit (2-channel models): E3NX-MA0 Color Fiber Amplifier Unit: E3NX-CA0 Smart Laser Amplifier Unit: E3NC-LA0 Smart Laser Amplifier Unit (CMOS type): E3NC-SA0 Smart Proximity Amplifier Unit: E2NC-EA0 E2NC-EA10 E2NC-EA40 Contact-Type Smart Amplifier Unit: E9NC-TA0
Power supply voltage	24 VDC (20.4 to 26.4 V)
Power and current consumption	2 W max. (Not including the power supplied to Sensors.), 80 mA max. (Not including the current supplied to Sensors.)
Indicators	RUN indicator (green) and SS (Sensor Status) indicator (green/red)
Vibration resistance (destruction)	10 to 60 Hz with a 0.7-mm double amplitude, 50 m/s² at 60 to 150 Hz, for 1.5 hours each in X, Y, and Z directions
Shock resistance (destruction)	150 m/s² for 3 times each in X, Y, and Z directions
Ambient temperature range	Operating: 0 to 55°C; * Storage: -30 to 70°C (with no icing or condensation)
Ambient humidity range	Operating and storage: 25% to 85% (with no condensation)
Maximum connectable Sensors *	10
Insulation resistance	20 MΩ min. (at 500 VDC)
Dielectric strength	500 VAC at 50/60 Hz for 1 min
Mounting method	35-mm DIN track – mounting
Weight (packed state/Unit only)	Approx. 160 g/approx. 40 g
Materials	Polycarbonate
Accessories	Power supply/communications connector, DIN Track End Plates (2 pieces), ferrite cores (2 pieces), and instruction manual

* Temperature Limitations Based on Number of Connected Amplifier Units:
Groups of 1 or 2 Amplifier Units: 0 to 55°C, Groups of 3 to 10 Amplifier Units: 0 to 50°C