Cảm biến quang điện Omron E3C-LDA51N

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Cung cấp khả năng phát hiện khoảng cách dài 1.000 mm.

Ba loại chùm tia có nghĩa là nhiều ứng dụng hơn.

Mô hình phản xạ đồng trục

Dễ dàng lắp đặt cảm biến và các đặc tính cảm biến tương đương với cảm biến xuyên chùm tia.

Đặc điểm

Sensor Heads

Sensing method	Beam shape	Sensing distance	Laser Class	Model
Diffuse-reflective	Spot *2 (variable)	1 m	Class 2	E3C-LD11N 2M
Coaxial Retro-reflective (with MSR function) *1	Spot *2 (variable)	7 m	Class 2	E3C-LR11N 2M
Coaxial Retro-reflective (with MSR function) *1	Spot (2.0-mm fixed dia.)	7 m	Class 1	E3C-LR12N 2M

*1. Select a Reflector (order separately) according to the application.
*2. Mounting a Beam Unit (sold separately) allows the use of line and area beams. or Area beam type.

Amplifier Units

Connection method	Appearance	Inputs/outputs	Model
Connection method	Appearance	Inputs/outputs	NPN output	PNP output
Pre-wired Amplifier Units		2 outputs + 1 input	E3C-LDA21N 2M	E3C-LDA51N 2M
Amplifier Units with Wire-saving Connectors		2 outputs	E3C-LDA6N	E3C-LDA8N
Amplifier Units with Wire-saving Connectors		1 output + 1 input	E3C-LDA7N	E3C-LDA9N

Accessories (Order Separately)

Wire-saving connectors (Required for models for Wire-saving Connectors.)

*Protective stickers: provided.

Item	Appearance	Cable length	No. of conductors	Model
Master Connector		2 m	4	E3X-CN21
Slave Connector		2 m	2	E3X-CN22

Beam Unit (for E3C-LD11N/LR11N)

A Beam Unit is not provided with the Sensor and must be ordered separately as required.

Applicable Sensor Head	Beam shape	Model
E3C-LD11N	Line	E39-P11
E3C-LD11N	Area	E39-P21
E3C-LR11N	Line	E39-P31
E3C-LR11N	Area	E39-P41

Mounting Bracket

A Mounting Bracket is not provided with the Amplifier Unit and must be ordered separately as required.

Appearance	Model	Quantity
	E39-L143	1

Note: Refer to E39-L/-S/-R on your OMRON website for details.

End Plate

A End Plate is not provided with the Amplifier Unit and must be ordered separately as required.

Appearance	Model	Quantity
	PFP-M	1

Note: Refer to PFP-[]N/-M/-S on your OMRON website for details.

Reflectors (Required when using retro-reflective models)

A Reflector is not provided with the Sensor head. Be sure to order a Reflector separately.

Type	Appearance	Model
Standard Effective area: 23 × 23 mm *		E39-R12
Standard Effective area: 7 × 7 mm *		E39-R13
Transparent object detection Effective area: 23 × 23 mm *		E39-R14
Sheet (cuttable) Effective area: 195 × 22 mm		E39-RS4
Sheet (cuttable) Effective area: 108 × 46 mm		E39-RS5

Thông số kỹ thuật

Sensor Heads

Type		Diffuse-reflective			Coaxial Retro-reflective (with MSR function)
Item		E3C-LD11N	E3C-LD11N + E39-P11	E3C-LD11N + E39-P21	E3C-LR11N	E3C-LR11N + E39-P31	E3C-LR11N + E39-P41	E3C-LR12N
Light source (wavelength)		Red semiconductor laser diode (650 nm),3 mW max. (JIS Class 2, IEC/EN Class 2, and FDA Class 2)			Red semiconductor laser diode (650 nm), 3 mW max. (JIS Class 2, IEC/EN Class 2, and FDA Class 2)			1 mW max. (JIS Class 1, IEC/EN Class 1, and FDA Class 2)
Sensing distance 1, 2	Super High-speed Mode (SHS)	30 to 250 mm			2 m	700 mm	400 mm	2 m
	High-speed Mode (HS)	30 to 250 mm			2 m	700 mm	400 mm	2 m
	Standard Mode (Stnd)	30 to 700 mm			5 m	1,300 mm	700 mm	5 m
	Giga Mode (GIGA)	30 to 1000 mm			7 m	1,700 mm	900 mm	7 m
*Focus 3**		0.8 mm max. (at distances up to 300 mm)	33 mm (at 150 mm)	33 × 15 mm (at 150 mm)	0.8 mm max. (at distances up to 1,000 mm)	28 mm (at 150 mm)	28 × 16 mm (at 150 mm)	2.0-mm dia. (at distance up to 1,000 mm)
Functions		Variable focal point mechanism (focus adjustment) *4, optical axis adjustment mechanism (axis adjustment)
Indicators		LDON indicator: Green; Operation indicator: Orange
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx
Ambient temperature		Operating: -10 to 55°C, Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity		Operating/storage: 35% to 85% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,000 VAC at 50/60 Hz for 1 minute
Shock resistance		Destruction: 300 m/s² 6 directions 3 times each (up/down, right/left, forward/backward)
Vibration resistance		Destruction: 10 to 150 Hz with double amplitude of 0.7 mm, in X, Y, and Z directions for 80 min each
Degree of protection		IP40 (IEC)			IP40 (IEC 60529)
Connection method		Connector (standard cable length: 2 m)
Materials		Case and cover: ABS Front surface filter: Methacrylic resin			Case and cover: ABS Front surface filter: Glass
Weight (packed state)		Approx. 85 g			Approx. 100 g
Accessories		Instruction manual, Laser warning labels (English)

*1. The sensing distance of E3C-LD11N is the value of the white paper.
*2. The sensing distance of E3C-LR[][]N is values apply when a E39-R12 Reflector is used.
*3. The beam radius is the value for the middle measurement distance and indicates a typical value for the middle sensing distance.
The radius is defined by light intensity of 1/e² (13.5%) of the central light intensity.
Light will extend beyond the main beam and may be affected by conditions surrounding the object being measured.
*4. The E3C-LR12N has a fixed beam size (the focal point cannot be changed).

Amplifier Units

Model	NPN output	E3C-LDA21N	E3C-LDA6N	E3C-LDA7N
	PNP output	E3C-LDA51N	E3C-LDA8N	E3C-LDA9N
	Connection method *2	Pre-wired	Wire-saving Connector
Applicable Amplifier Unit		E3C-L[][][]N
Outputs		2 outputs	2 outputs	1 output
*External input 1**		1 input	—	1 input
Supply voltage		12 to 24 VDC ±10%, ripple (p-p) 10% max.
Power consumption		Power consumption: 1080 mW max. (when the power supply voltage is 24 V, the current consumption is 45 mA max.)
Control output		Load power supply voltage: 26.4 VDC, open collector output type (depends on the NPN/PNP output format) Load current: 100 mA max. for 1 to 3 units use, 20 mA max. for 4 or more units joined. Residual voltage: Load current less than 10 mA: 1 V max., load current 10 to 100 mA: 2 V max. Off-state current: 0.1 mA max.
Indicators		7-segment displays (Threshold Level display: green, Incident Light Level display: white) Display direction: Switchable between normal and reversed. OUT indicator (orange), L/D indicator (orange), ST indicator (blue), DPC indicator (green), and OUT selection indicator (orange, only on models with 2 outputs)
Protection circuits		Power supply reverse polarity protection, output short-circuit protection, and output reverse polarity protection
Response time	Super-high- speed mode (SHS)	Operate or reset: 80 μs
	High-speed mode (HS)	Operate or reset: 250 μs
	Standard mode (Stnd)	Operate or reset: 1 ms
	Giga mode (GIGA)	Operate or reset: 4 ms
Sensitivity adjustment		Smart Tuning (2-point tuning, full auto tuning, power tuning, percentage tuning) or manual adjustment
Maximum connectable Units		16
No. of Units for mutual interference prevention *3	Super High-speed Mode (SHS)	0 Note: The mutual interference prevention function is disabled when the detection mode is set to High Speed mode (SHS).
	High-speed Mode (HS)	10
	Standard Mode (Stnd)	10
	Giga Mode (GIGA)	10
Functions	Dynamic power control (DPC)	Provided
	Timer	Select from timer disabled, OFF-delay, ON-delay or one-shot timer. 1 to 9,999 ms
	Zero reset	Negative values can be displayed. (Threshold value is shifted.)
	Resetting settings	Initial reset (factory defaults)
	Power tuning	Select from ON or OFF.
	Output 1	Select from normal detection mode or area detection mode.
	Output 2	Select from normal detection mode, alarm output mode or error output mode.		—
	External input	Select from input OFF, tuning, power tuning, emission OFF or zero reset.	—	Select from input OFF, tuning, power tuning, emission OFF or zero reset.
	Hysteresis width	Select from standard setting or user setting.
Ambient temperature range		Operating: Groups of 1 or 2 Amplifier Units: -25 to 55°C, Groups of 3 to 10 Amplifier Units: -25 to 50°C, Groups of 11 to 16 Amplifier Units: -25 to 45°C Storage: -30 to 70°C (with no icing or condensation)
Ambient humidity range		Operating and storage: 35 to 85% (with no condensation) within the surrounding air temperature range shown above
Altitude		2000 m max.
Installation environment		Pollution degree 3 (as per IEC 60947-1)
Insulation resistance		20 MΩ (at 500 VDC)
Dielectric strength		1,000 VAC at 50/60 Hz for 1 min
Vibration resistance (destruction)		10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		500 m/s² for 3 times each in X, Y, and Z directions
Weight (packed state/sensor only)		Approx. 115 g/ approx. 75 g	Approx. 60 g/approx. 20 g
Materials	Case	Polycarbonate (PC)
	Protective cover	Polycarbonate (PC)
	Cable	PVC
Accessories		Instruction manual, compliance sheet

*1. The following details apply to the input.

	Contact input (relay or switch)	Non-contact input (transistor)	*Input time 1-1**
NPN	ON: Shorted to 0 V (Sourcing current: 1 mA max.)	ON: 1.5 V max. (Sourcing current: 1 mA max.)	ON: 9 ms min. OFF: 20 ms min.
NPN	OFF: Open or shorted to Vcc	OFF: Vcc – 1.5 V to Vcc (Leakage current: 0.1 mA max.)
PNP	ON: Shorted to Vcc (Sinking current: 3 mA max.)	ON: Vcc – 1.5 V to Vcc (Sinking current: 3 mA max.)
PNP	OFF: Open or shorted to 0 V	OFF: 1.5 V max. (Leakage current: 0.1 mA max.)

*1-1. Input time is 25 ms (ON)/(OFF) only when (in tUnE) input is selected.

*2. Separately purchase the E3X-CN21 Master Connector (4-conductor) when using this product as a single unit or as a master unit, or the E3X-CN22 Slave Connector (2-conductor) when using as a slave unit. Either Connector can be used.
*3. The tuning will not change the number of units. In standard mode and giga mode, set the threshold value to 400 or more.