Cảm biến quang điện Omron E3S-CL

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

• Phát hiện đáng tin cậy bất kể màu sắc hoặc vật liệu.
Lỗi đen/trắng tối đa chỉ 2%. (E3S-CL1)

• Khoảng cách phát hiện dài 500 mm (E3S-CL2).

• Loại bỏ ảnh hưởng nền.
(Chênh lệch hành trình tối đa chỉ 2% với E3S-CL1.)

• Thân kim loại với cấp bảo vệ IP67.
Kháng dầu (E3S-CL2).

Đặc điểm

Sensors

Appearance	Sensing/Setting range	Model
		E3S-CL1 2M
		E3S-CL2 2M

Thông số kỹ thuật

Sensing method		Distance-settable
Model		E3S-CL1	E3S-CL2
Sensing distance		5 to 200 mm (white paper: 200 x 200 mm, setting distance: 200 mm)	5 to 500 mm (white paper: 200 x 200 mm, setting distance: 500 mm)
Setting range		40 to 200 mm (white paper: 200 x 200 mm)	50 to 500 mm (white paper: 200 x 200 mm)
Differential travel		2% max. of setting distance	10% max. of setting distance
Reflectivity characteristics (black/white error) *1		2% max. of setting distance	10% max. of setting distance
Light source (wavelength)		Red LED (700 nm)	Infrared LED (860 nm)
Power supply voltage		10 to 30 VDC; ripple: 10% max.
Current consumption		35 mA max.	50 mA max.
Control output		Load power supply voltage: 30 VDC max., Load current: 100 mA max. Residual voltage: NPN output: 1.2 V max., PNP output: 2 V max. Open collector output (NPN/PNP depending on model) Light-ON/Dark-ON selectable
Protection circuits		Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention
Response time		Operate or reset: 1 ms max.	Operate or reset: 2 ms max.
Distance setting		Six-turn endless adjustor with an indicator
Ambient illumination (Receiver side)		Incandescent lamp: illumination on optical spot: 5,000 lx max. Sunlight: illumination on optical spot: 10,000 lx max.
Ambient temperature range		Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 3 times each in X, Y, and Z directions
Degree of protection		IP67 (IEC 60529), NEMA: 6P (indoors only) *2	IP67 (IEC 60529) (in-house standards: oil- resistant), NEMA: 6P (indoors only) *2
Connection method		Pre-wired (standard length: 2 m)
Weight (packed state)		Approx. 170 g
Materials	Case	Zinc die-cast
	Operation panel	PES (Polyether sulfone)
	Lens	Methacrylic resin
	Mounting bracket	Stainless steel (SUS304)
Accessories		Mounting bracket, 12 M4 hexagonal bolts (with spring and flat washers), Adjustment screwdriver, and Instruction manual

*1. Sensing distance error for standard white (90% reflective) and black (5% reflective) paper.
*2. NEMA: National Electrical Manufacturers Association