Cảm biến quang điện Omron E3Z-G

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

• Cảm biến dạng rãnh với chiều rộng rãnh là 25 mm.

• Các mẫu có sẵn với một hoặc hai trục ánh sáng.

• Các mẫu có sẵn đầu nối có dây M8.

Đặc điểm

Sensors

Sensing method	Appearance	Connection method	Sensing distance	No. of optical axes	Model
Sensing method	Appearance	Connection method	Sensing distance	No. of optical axes	NPN output	PNP output
Through- beam		Pre-wired (2 m)	25 mm (Infrared light)	1	*E3Z-G61 2M 1 2*	*E3Z-G81 2M 1 2*
		Pre-wired Connector (M8, 4 pins)		1	E3Z-G61-M3J 0.3M	E3Z-G81-M3J 0.3M
		Pre-wired (2 m)		2	*E3Z-G62 2M 1**	*E3Z-G82 2M 1**
		Pre-wired Connector (M8, 4 pins)		2	E3Z-G62-M3J 0.3M	E3Z-G82-M3J 0.3M

*1. M12 Standard Pre-wired Connector Models are also availavble.
When ordering, add “-M1J 0.3M” to the end of the model number (e.g., E3Z-G61-M1J 0.3M).
The cable is 0.3 m long.
*2. M12 Pre-wired Smartclick Connector Models are also availavble.
When ordering, add “-M1TJ 0.3M” to the end of the model number (e.g., E3Z-G61-M1TJ 0.3M).
The cable is 0.3 m long.

Accessories (Order Separately)

Sensor I/O Connectors (Sockets on One Cable End)

(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Cable specification	Type of cable		Model
Standard cable	2 m	4-wire	XS3F-M421-402-A
	5 m		XS3F-M421-405-A
	2 m		XS3F-M422-402-A
	5 m		XS3F-M422-405-A
Vibration-proof robot cable	2 m		XS3F-M421-402-R
	5 m		XS3F-M421-405-R
	2 m		XS3F-M422-402-R
	5 m		XS3F-M422-405-R

Note: Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details.

Protective Bracket

A Protective Bracket is not provided with the Sensor. Order a Protective Bracket separately if required.

Appearance	Model	Applicable model
	E39-L149	E3Z-G

Thông số kỹ thuật

Number of optical axes			1	2
Model		NPN output	E3Z-G61/E3Z-G61-M3J	E3Z-G62/E3Z-G62-M3J
Model		PNP output	E3Z-G81/E3Z-G81-M3J	E3Z-G82/E3Z-G82-M3J
Sensing distance (distance between arms of groove)			25 mm
Standard sensing object			Opaque, 1.5-mm dia. min.
Light source (wavelength)			Infrared LED (940 nm)
Power supply voltage			12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption			25 mA max.	40 mA max.
Control output			Load power supply voltage: 26.4 VDC max. Load current: 100 mA max. (Residual voltage: 1 V max.) Open collector output (NPN or PNP depending on model) Light-ON/Dark-ON selectable
Protection circuits			Reversed power supply polarity protection, Output short-circuit protection, and Mutual interference prevention
Response time			Operate or reset: 1 ms max.
Ambient illumination (Receiver side)			Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature range			Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range			Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance			20 MΩ min. at 500 VDC between lead wires and case
Dielectric strength			1,000 VAC, 50/60 Hz for 1 min between lead wires and case
Vibration resistance			Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance			Destruction: 500 m/s² 3 times each in X, Y, and Z directions
Degree of protection			IP64 (IEC 60529)
Connection method			Pre-wired cable (standard length: 2 m and 0.5 m)/Pre-wired Connector (standard length: 300 mm)
Indicator			Operation indicator (orange)
Weight (packed state)	Pre-wired (with 2-m cable)		Approx. 65 g
Weight (packed state)	Pre-wired Connectors		Approx. 30 g
Material	Case		ABS (Acrylonitril Butadiene Styrene)
Accessories			Instruction manual