Cảm biến quang điện Omron E3Z-LR

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

• An toàn và tin cậy với laze loại 1 (JIS và IEC).

• Dòng sản phẩm bao gồm các mẫu có cài đặt khoảng cách mà không ảnh hưởng đến màu sắc.

• Nhiệt độ hoạt động xung quanh tối đa là 55°C và cấu trúc chống thấm nước ở cấp độ E3Z.

Đặc điểm

Sensors

Sensing method	Appearance	Con- nection method	Re- sponse time	Sensing distance (Red light)	Model
Sensing method	Appearance	Con- nection method	Re- sponse time	Sensing distance (Red light)	NPN output	PNP output
Through- beam (Emitter + Receiver)		Pre-wired (2 m)	1 ms	60 m	E3Z-LT61 2M Emitter E3Z-LT61-L 2M Receiver E3Z-LT61-D 2M	E3Z-LT81 2M Emitter E3Z-LT81-L 2M Receiver E3Z-LT81-D 2M
Through- beam (Emitter + Receiver)		Connector (M8, 4 pins)		60 m	E3Z-LT66 Emitter E3Z-LT66-L Receiver E3Z-LT66-D	E3Z-LT86 Emitter E3Z-LT86-L Receiver E3Z-LT86-D
Retro- reflective with MSR function		Pre-wired (2 m)		*2 15 m (300 mm) (Using E39-R1) 7 m (200 mm) (Using E39- R12) 7 m (200 mm) (Using E39-R6)	E3Z-LR61 2M	E3Z-LR81 2M
Retro- reflective with MSR function		Connector (M8, 4 pins)			E3Z-LR66	E3Z-LR86
Distance- settable (BGS Models)		Pre-wired (2 m)		20 to 40 mm (Min. distance set) 20 to 300 mm (Max. distance set)	E3Z-LL61 2M	E3Z-LL81 2M
		Connector (M8, 4 pins)			E3Z-LL66	E3Z-LL86
		Pre-wired (2 m)	0.5 ms	25 to 40 mm (Min. distance set) 25 to 300 mm (Max. distance set)	E3Z-LL63 2M	E3Z-LL83 2M
		Connector (M8, 4 pins)	0.5 ms		E3Z-LL68	E3Z-LL88

*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.

Accessories

Slits

(A Slit is not provided with a Through-beam Sensor. Order a Slit separately if required.)

Slit width	Sensing distance	Minimum detectable object (reference value)	Model	Contents
0.5 mm dia.	3 m	0.1 mm dia.	E39-S65A	One set (contains Slits for both the Emitter and Receiver)

Reflectors

(A Reflector is required for each Retro-reflective Sensor: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)

Name	Sensing distance		Model	Remarks
Name	Rated value	Reference value	Model	Remarks
Reflector	—	15 m (300 mm)	E39-R1	Retro-reflective models are not provided with Reflectors. Separate the Sensor and the Reflector by at least the distance given in parentheses. The MSR function is enabled.
	7 m (200 mm)	—	E39-R12
	—	7 m (200 mm)	E39-R6

Note: If you use the Reflector at any distance other than the rated distance, make sure that the stability indicator lights
properly when you install the Sensor.

Mounting Brackets

A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.

Model	Quantity	Remarks
*E39-L153 1**	1	Mounting Brackets
*E39-L104 1**	1	Mounting Brackets
*E39-L43 2**	1	Horizontal Mounting Bracket
*E39-L142 2**	1	Horizontal Protective Cover Bracket
E39-L44	1	Rear Mounting Bracket
*E39-L98 2**	1	Metal Protective Cover Bracket
E39-L150	1 set	(Sensor adjuster) Easily mounted to the aluminum frame rails of conveyors and easily adjusted. For left to right adjustment
E39-L151	1 set
*E39-L144 2**	1	Compact Protective Cover Bracket (For E3Z only)

Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
Connector models.
*2. Cannot be used for Standard Connector models.

Sensor I/O Connectors (Sockets on One Cable End)

(Models for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Size	Cable	Appearance	Cable type		Model
M8	Standard	Straight *1	2 m	4-wire	XS3F-M421-402-A
		Straight *1	5 m		XS3F-M421-405-A
		L-shaped 1 2	2 m		XS3F-M422-402-A
		L-shaped 1 2	5 m		XS3F-M422-405-A

Note: When using a Through-beam Sensor, order one Mounting Bracket for the Receiver and one for the Emitter
*1. The connector will not rotate after connecting.
*2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.

Thông số kỹ thuật

Sensing method		Through-beam	Retro-reflective with MSR function	Distance-settable (BGS models)
Response		Standard response			High-speed response
Model	NPN output	E3Z-LT61/-LT66	E3Z-LR61/-LR66	E3Z-LL61/-LL66	E3Z-LL63/-LL68
Model	PNP output	E3Z-LT81/-LT86	E3Z-LR81/-LR86	E3Z-LL81/-LL86	E3Z-LL83/-LL88
Sensing distance		60 m	0.2 to 7 m (when using E39-R12)	White paper (100 × 100 mm): 20 to 300 mm Black paper (100 × 100 mm): 20 to 160 mm	White paper (100 × 100 mm): 25 to 300 mm Black paper (100 × 100 mm): 25 to 100 mm
Set distance range		—		White paper (100 × 100 mm): 40 to 300 mm Black paper (100 × 100 mm): 40 to 160 mm	White paper (100 × 100 mm): 40 to 300 mm Black paper (100 × 100 mm): 40 to 100 mm
Spot diameter (reference value)		5-mm dia. at 3 m		0.5-mm dia. at 300 mm
Standard sensing object		Opaque: 12-mm dia. min.	Opaque: 75-mm dia. min.	—
Minimum detectable object (reference value)		6-mm-dia. opaque object at 3 m		0.2-mm-dia. stainless-steel pin gauge at 300 mm
Differential travel		—		5% max. of set distance
Black/white error		—		5% at 160 mm	5% at 100 mm
Directional angle		Receiver: 3 to 15°	—
Light source (wavelength)		Red LD (655 nm), JIS CLass 1, IEC Class 1, FDA Class 2
Power supply voltage		12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption		35 mA (Emitter 15 mA, Receiver 20 mA)	30 mA max.
Control output		Load power supply voltage: 26.4 VDC max., Load current: 100 mA max., Open collector output
Residual output voltage		Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max.
Output mode switching		Switch to change between light-ON and dark-ON
Protection circuits		Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection	Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection
Response time		Operate or reset: 1 ms max.			Operate or reset: 0.5 ms max.
Sensitivity adjustment		One-turn adjuster		Five-turn endless adjuster
Ambient illumination (Receiver side)		Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature range		Operating: -10 to 55°C, Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no icing or condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 3 times each in X, Y, and Z directions
Degree of protection		IP67 (IEC 60529)
Connection method		Pre-wired cable (standard length: 2 m): E3Z-L[][]1/-L[][]3 Standard M8 Connector: E3Z-L[][]6/-L[][]8
Indicator		Operation indicator (orange) Stability indicator (green) Emitter for Through-bream Models has power indicator (orange) only.
Weight (packed state)	Pre-wired cable (2 m)	Approx. 120 g	Approx. 65 g
Weight (packed state)	Standard Connector	Approx. 30 g	Approx. 20 g
Material	Case	PBT (polybutylene terephthalate)
Material	Lens	Modified polyarylate resin	Methacrylic resin	Modified polyarylate resin
Accessories		Instruction manual (Neither Reflectors nor Mounting Brackets are provided with any of the above models.)

Kích thước

Sensors

Through-beam *
Pre-wired Models
E3Z-LT61, E3Z-LT81

Through-beam *
Standard Connector Models
E3Z-LT66, E3Z-LT86

* Models numbers for Through-beam Sensors (E3Z-LT[][]) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding “-L” to the set model number (example: E3Z-LT61-L 2M),
the model number of the Receiver, by adding “-D” (example: E3Z-LT61-D 2M.) Refer to Ordering Information to
confirm model numbers for Emitter and Receivers.