Chưa có sản phẩm trong giỏ hàng.
• Sáu chỉ số chọn hàng hiển thị rất rõ ràng.
• Tốc độ hiển thị có thể lựa chọn (chậm/nhanh)
Cảm biến quang điện Omron F3W-D
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Khoảng cách phát hiện 3 m
Chế độ hiển thị có thể lựa chọn: Tất cả ánh sáng, Tất cả nhấp nháy, Ánh sáng giống thang máy, Ánh sáng giống đàn accordion
Các chỉ báo lấy hàng bên ngoài có thể được kết nối
Bộ chỉ báo (Sê-ri M22N, v.v.) có thể được kết nối trực tiếp với Cảm biến chọn hàng và được gắn ở vị trí dễ nhìn.
* Đảm bảo kiểm tra điện áp nguồn trước khi sử dụng.
Để biết thêm thông tin về Sê-ri M22N, hãy tham khảo Bảng dữ liệu A22N/M22N/A30N (Dòng sản phẩm số A254).
Để biết thêm thông tin về Sê-ri M22N, hãy tham khảo Bảng dữ liệu A22N/M22N/A30N (Dòng sản phẩm số A254).
Đặc điểm
Sensors
| Sensing method | Appearance | Connection method (cable length) | Sensing distance | Beams | Sensing width (mm) | Output type | External indicator | Model | |
|---|---|---|---|---|---|---|---|---|---|
| Gap | Qty | ||||||||
| Through- beam |  | Pre-wired (5 m) | 3 m (Infrared LED) | 25 m | 5 | 100 | NPN open collector | — | F3W-D052A *1 |
| Possible | F3W-D052AP *1 | ||||||||
| Pre-wired connector (2 m) | — | F3W-D052B *1, 2 | |||||||
| Possible | F3W-D052BP *1, 2 | ||||||||
*1. Models with PNP outputs are also available. To order PNP Models, replace A with C in the model number for a Pre-
wired Model and B with D in the model number for a Pre-wired Connector Model (Example: F3W-D052C).
*2. The XS2F-D521-[]G0 is the applicable connector cable. The colors of the external sheathes of the conductors,
however, are different. Refer to the XS2.
wired Model and B with D in the model number for a Pre-wired Connector Model (Example: F3W-D052C).
*2. The XS2F-D521-[]G0 is the applicable connector cable. The colors of the external sheathes of the conductors,
however, are different. Refer to the XS2.
Accessories (Order Separately)
Mounting Brackets
| Appearance | Model | Quantity | Remarks |
|---|---|---|---|
 | F39-L10 | two per set | L-shaped Mounting Bracket (mounting screws included) |
 | F39-L11 | two per set | Flat Mounting Bracket (mounting screws included) |
Protective Bracket
| Appearance | Model | Qty |
|---|---|---|
 | F39-L12 | One each for Emitter and Receiver (mounting screws included) |
Y-shaped Joint Plugs and Sockets (Cable with Connectors on Both Ends)
| Appearance | Overall length | Model | Qty |
|---|---|---|---|
 | 2 m | XS2R-D526-S001-2 | 1 |
| 5 m | XS2R-D526-S001-5 | 1 |
Y-shaped Joint Plugs and Sockets without Cable
| Appearance | Model | Qty | Remarks |
|---|---|---|---|
 | XS2R-D526-S003 | 1 | Connecting cable: Cable with connectors on both ends: XS2W Series Cable with connector on one end: XS2F Series 4-conductor models |
Sensor I/O Connectors (Models for Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
| Size | Type | Appearance | Cable length | Model | |
|---|---|---|---|---|---|
| M12 | Socket on one cable end | Straight |  | 2 m | XS2F-D421-D80-F |
| 5 m | XS2F-D421-G80-F | ||||
| L-shape |  | 2 m | XS2F-D422-D80-F | ||
| 5 m | XS2F-D422-G80-F | ||||
| Socket and plug on cable ends * | Straight/Straight |  | 2 m | XS2W-D421-D81-F | |
| 5 m | XS2W-D421-G81-F | ||||
| L-shape/L-shape |  | 2 m | XS2W-D422-D81-F | ||
| 5 m | XS2W-D422-G81-F | ||||
Note: 1. Each model includes one cable. A cable is required for both the Emitter and the Receiver (two cables total).
2. Refer to Sensor I/O Connectors/Sensor Controllers on your OMRON website for details.
* Straight type/L-shape type combinations are also available.
Thông số kỹ thuật
| Sensing method | Through-beam | ||
|---|---|---|---|
| Model | F3W-D052A (P) *1 | F3W-D052B (P) *1 | |
| Sensing distance | 3 m, switchable between LONG mode (1 to 3 m) and SHORT mode: (0.05 to 1 m), factory-set to SHORT mode. | ||
| Beam gap | 25 mm | ||
| Number of beams | 5 | ||
| Sensing width | 100 mm | ||
| Standard sensing object | Opaque, 35 mm dia. min. | ||
| Light source (emission wavelength) | Infrared LED (860 nm) | ||
| Power supply voltage | 12 to 24 VDC±10% (ripple (p-p): 10% max.) | ||
| Power consumption | Emitter: 0.6 W max., Receiver: 0.7 W max. | ||
| Control output | NPN open collector with 100 mA max. at 30 VDC NPN open collector output type Dark-ON or Light-ON (selectable) | ||
| Picking instruction indicator input | Open collector with relay or transistor input Indicator ON: Input voltage of 0 to 2 V Indicator OFF: Open (with leakage current of 0.1 mA max.) | ||
| Protection circuits | Reverse-connection protection, output short protection, and mutual interference prevention function (set with frequency switch) | ||
| Response time | Operate/Reset: 10 ms max. | ||
| Indicators | Receiver | Operation indicator (orange), stability indicator (green), and 6 picking indicators (orange), UNI-WIRE Direct Connection Models: Transmission indicator (orange) *2 | |
| Emitter | Power indicator (green), different frequency indicator (green), and 6 picking indicators (orange), UNI-WIRE Direct Connection Models: Transmission indicator (orange) *2 | ||
| Ambient temperature | Operating: -10° to 55°C, Storage: -25° to 70°C (with no icing or condensation) | ||
| Ambient humidity | 35% to 85% (with no condensation) | ||
| Insulation resistance | 20 MΩ min. (at 500 VDC) | ||
| Dielectric strength | 1,000 VAC 50/60 Hz for 1 min | ||
| Vibration resistance (destruction) | 10 to 50 Hz, 1.5-mm double-amplitude for 2 hours each in X, Y and Z directions | ||
| Shock resistance (destruction) | 500 m/s2, 3 times each in X, Y and Z directions | ||
| Degree of protection | IEC60529: IP62 (with the operation cover closed) | ||
| Connection method | Pre-wired Standard cable length: 5 m *3 | Pre-wired connector (M12 5-pin connector) Standard cable length: 2 m *3 | |
| Weight (packed state) | Approx. 360 g | Approx. 230 g | |
| Materials | Case, indicator windows | ABS resin | |
| Lens | Acrylic resin | ||
| Operation cover | Nylon (PA6) | ||
| Accessories | Instruction manual | ||
*1. The F3W-D052[]P Emitters are provided with the external picking indicator output line shown in the following table.
| Item | F3W-D052AP, F3W-D052BP |
|---|---|
| Connection method | Pre-wired (standard cable length: 300 mm) |
| Electrical specifications | Output current: 50 mA max. Output voltage: Fixed at Sensor power supply voltage |
*2. The transmission indicator indicates bus transmission status.
*3. The following cable lengths are also available.
F3W-D052A (P): 2 m, 7 m
F3W-D052B : 1 m, 3.5 m
*3. The following cable lengths are also available.
F3W-D052A (P): 2 m, 7 m
F3W-D052B : 1 m, 3.5 m
Kích thước
Sensors
F3W-D
Emitter
F3W-D052A(P)-L
F3W-D052B(P)-L
Receiver
F3W-D052A(P)-D
F3W-D052B(P)-D
Accessories (Sold Separately)
Mounting Brackets
F39-L10 (L-shaped)
Material: Iron (Thickness: 2 mm)
Mounting screws provided.
F39-L11 (Flat)
Material: Iron (Thickness: 2 mm)
Mounting screws provided.
Protective Bracket
F39-L12 (Receiver)
Material: Iron (Thickness: 1.6 mm)
Mounting screws provided.
Note: The Emitter and Receiver are axially symmetrical.
Y-shaped Joint Plugs and Sockets (Cable with Connectors on Both Ends)
XS2R-D526-S001-2 (L=2,000 mm)
XS2R-D526-S001-5 (L=5,000 mm)
Y-shaped Joint Plugs and Sockets without Cable
XS2R-D526-S003
Hãy là người đầu tiên nhận xét “Cảm biến quang điện Omron F3W-D”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.