Cảm biến quang Omron EE-SPX303N

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Chiều rộng khe rộng 13 mm và khả năng chống nhiễu và nhiễu ánh sáng vượt trội.

• Chống nhiễu tương đương với cảm biến quang có tích hợp bộ khuếch đại.

• Khả năng chống ồn thông thường gấp ít nhất 30 lần so với các model trước đó.

• Chống ồn biến tần ít nhất gấp 10 lần so với các model trước đó.

• Tích hợp bảo vệ phân cực ngược.

Đặc điểm

Sensors

Appearance	Sensing method	Sensing distance (slot width)	Output type	Output configuration	Model
	Through-beam type (with slot)	13 mm (slot width) (Infrared light)	NPN output	Dark-ON	EE-SPX303N
	Through-beam type (with slot)	13 mm (slot width) (Infrared light)	NPN output	Light-ON	EE-SPX403N

Accessories (Order Separately)

Type		Cable length	Model
Connector	Connector		EE-1001
	Connector		EE-1009 *
	Connector with Cable	1 m	EE-1006 1M
		1 m	EE-1010 1M *
		2 m	EE-1006 2M
		2 m	EE-1010 2M *
	Connector with Robot Cable	1 m	EE-1010-R 1M *
	Connector with Robot Cable	2 m	EE-1010-R 2M *
NPN/PNP Conversion Connector		0.46 m (total length)	EE-2002

Note: Refer to EE-[] Catalog for details.
* EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.

Thông số kỹ thuật

Models	EE-SPX303N, EE-SPX403N
Sensing distance	13 mm (slot width)
Sensing object	Opaque: 2.2 × 0.5 mm min.
Differential distance	0.05 mm max.
Light source	Infrared LED (pulse lighting) with a peak wavelength of 940 nm
Indicator	Light indicator (red)
Supply voltage	12 to 24 VDC ±10%, ripple (p-p): 5% max.
Current consumption	15 mA max.
Control output	NPN voltage output: Load power supply voltage: 12 to 24 VDC Load current: 80 mA max. OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 2.0 V max. 10 mA load current with a residual voltage of 1.0 V max.
Protection circuits	Power supply reverse polarity protection, Output reverse polarity protection
Response frequency *	100 Hz min.
Ambient illumination	3,000 lx max. with incandescent light or sunlight on the surface of the receiver.
Ambient temperature range	Operating: -10 to +55°C Storage: -25 to +65°C
Ambient humidity range	Operating: 5% to 85% Storage: 5% to 95%
Vibration resistance	Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions
Shock resistance	Destruction: 500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection	IEC IP50
Connecting method	Special connector (soldering not possible)
Weight	Approx. 4 g
Material	Polycarbonate