Cảm biến quang Omron EE-SPZ-A

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Cảm biến quang học với điều chế ánh sáng để giảm nhiễu ánh sáng bên ngoài.

• Dễ dàng điều chỉnh và giám sát trục quang bằng đèn báo.

• Dải điện áp hoạt động rộng: 5 đến 24 VDC

• Hỗ trợ kết nối với Bộ điều khiển khả trình (PLC).

• Đầu nối dễ đi dây đảm bảo dễ dàng bảo trì.

Đặc điểm

Sensors

Appearance	Sensing method	Sensing distance	Output type	Output configuration	Model
	Retroreflective type	200 mm (Infrared light)	NPN output	Dark-ON	EE-SPZ301-A
	Retroreflective type	200 mm (Infrared light)	NPN output	Light-ON	EE-SPZ401-A

Accessories (Order Separately)

Type		Cable length	Model	Remarks
Connector			EE-1002
Connector	Connector with Cable	1 m	EE-1003
NPN/PNP Conversion Connector		0.46 m ( total length)	EE-2001
Connector Hold-down Clip			EE-1003A	For EE-1003 only.
Reflector			E39-R1

* Refer to Accessories for details.
* Refer to the E39-L/E39-S/E39-R Datasheet for information on Reflectors.

Thông số kỹ thuật

Material	Lens	Polycarbonate
Models		EE-SPZ301-A, EE-SPZ401-A
*Sensing distance 1**		200 mm ( using E39-R1 reflector)
Light source		GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm
*Indicator 2**		Light indicator (red)
Supply voltage		5 to 24 VDC ±10%, ripple (p-p): 5% max.
Current consumption		Average: 15 mA max., Peak: 50 mA max.
Control output		NPN voltage output Load power supply voltage: 5 to 24 VDC Load current: 80 mA max. OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 1.0 V max. 10 mA load current with a residual voltage of 0.4 V max.
*Response frequency 3**		100 Hz min.
Ambient illumination		3,000 lx max. with incandescent light or sunlight on the surface of the receiver
Ambient temperature range		Operating: – 10 to +55 ° C Storage: – 25 to +65 ° C
Ambient humidity range		Operating: 5% to 85% Storage: 5% to 95%
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC IP50
Connecting method		Special connector (soldering not possible)
Weight (packaged)		Approx. 3 g
Material	Case	Polycarbonate

*1. Operation may not be possible near the sensor.
*2. The indicator is a GaP red LED (peak wavelength: 700 nm).
*3. The response frequency was measured by detecting the following rotating disk.