Chưa có sản phẩm trong giỏ hàng.
Bạn có thể đạt được khả năng phát hiện từ xa một cách ổn định chỉ các kim loại màu, chẳng hạn như nhôm, đồng thau, đồng và thép không gỉ.
Cảm biến tiệm cận Omron E2CY-SD
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Đạt được khả năng phát hiện ổn định các loại kim loại màu như nhôm, đồng và thép không gỉ.
Phát hiện ổn định
Phát hiện ổn định kim loại màu
Xác nhận đơn giản
Kiểm tra trạng thái phát hiện trong nháy mắt
Trạng thái phát hiện được hiển thị trên màn hình kỹ thuật số cho ứng dụng đáng tin cậy.
Nhiều lựa chọn
Đội hình đầy đủ các đầu cảm biến
Chọn từ nhiều loại đầu cảm biến, chẳng hạn như đường kính 5,4 mm, đường kính 8 mm, phẳng nhỏ gọn và đầu M5. Chúng tôi thậm chí còn cung cấp đầu fluororesin kháng hóa chất (đường kính 8 mm).
Đặc điểm
| Sensors | Amplifier Unit | ||||
|---|---|---|---|---|---|
| Appearance | Stable sensing distance | Model | Output configuration | Model | |
Shielded | M5 | 1.5 mm | E2CY-X1R5A 3M | DC 3-wire NPN open collector | E2CY-SD11 2M |
| 5.4 dia. | E2CY-C1R5A-1 3M | ||||
| 8 dia. | 2 mm | E2CY-C2A 3M | |||
| Flat | 3 mm | E2CY-V3A 3M | |||
| 8 dia. | 2 mm | E2CY-C2AF 3M | |||
Thông số kỹ thuật
Sensors
| Model | E2CY-X1R5A E2CY-C1R5A-1 | E2CY-C2A(F) | E2CY-V3A | |
|---|---|---|---|---|
| Stable sensing distance | 0 to 1.5 mm | 0 to 2 mm | 0 to 3 mm | |
| Differential travel | 10% max. of sensing distance with Amplifier Unit in FINE mode 15% max. of sensing distance with Amplifier Unit in NORM mode | |||
| Detectable object | Non-ferrous metal | |||
| Standard sensing object | Aluminum: 8 × 8 × 1 mm | Aluminum: 12 × 12 × 1 mm | ||
| Response frequency *1 | 40 Hz min. with Amplifier Unit in FINE mode 100 Hz min. with Amplifier Unit in NORM mode | |||
| Ambient temperature range | Operation: -10 to 55°C, Storage: -25 to 70°C (with no icing or condensation) | |||
| Ambient humidity range | Operating and storage: 35% to 95% (with no condensation) | |||
| Temperature influence *2 | -10 to 55°C | ±15% max. of sensing distance at 23°C | distance at 23°C ±10% max. of sensing distance at 23°C | ±15% max. of sensing distance at 23°C |
| 0 to 40°C | ±10% max. of sensing distance at 23°C *3 | ±10% max. of sensing distance at 23°C | ||
| Vibration resistance | Destruction: 10 to 500 Hz, 2-mm double amplitude or 150 m/s2 for 2 hours each in X, Y, and Z directions | |||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | |||
| Degree of protection | IEC 60529 IP67 | |||
| Connection method | Pre-wired (High-frequency coaxial cable, Standard cable length: 3 m) | |||
| Cable length compensation | 0.5 to 5 m *4 | |||
| Weight (packed state) | Approx. 35 g | |||
| Materials | Case | Stainless steel | Zinc die-cast | |
| Sensing surface | Heat-resistant ABS (E2CY-C2AF: Fluororesin) | |||
| Cable | Soft PVC (E2CY-C2AF: Fluororesin) | |||
| Clamping nuts | Nickel-plated brass (E2CY-X1R5A only) | |||
| Toothed washers | Zinc-plated iron (E2CY-X1R5A only) | |||
| Mounting screws | Zinc-plated iron (E2CY-V3A only) | |||
*1. The average value when using the DC-switching control output on the Amplifier Unit.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object,
and a set distance of half the stable sensing distance.
*2. When the temperature around the Amplifier Unit is stable at 23°C.
*3. E2CY-C1R5A-1: ±15% max. of sensing distance at 23°C
*4. When extending the cable, use a 1.5D-2V (equivalent to JIS C 3501) cable with characteristic impedance of 50 Ω.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object,
and a set distance of half the stable sensing distance.
*2. When the temperature around the Amplifier Unit is stable at 23°C.
*3. E2CY-C1R5A-1: ±15% max. of sensing distance at 23°C
*4. When extending the cable, use a 1.5D-2V (equivalent to JIS C 3501) cable with characteristic impedance of 50 Ω.
Amplifier Unit
| Model | E2CY-SD11 | |
|---|---|---|
| Power supply voltage | 12 to 24 VDC ±10%, ripple: 10% max. | |
| Power consumption | 1,080 mW max. (45 mA max. at 24 VDC) | |
| Sensing distance adjustment range | 10% max. of stable sensing distance | |
| Sensitivity setting | Teaching/manual adjustment | |
| Control output | NPN open collector (26.4 VDC max.), load current: 100 mA max., residual voltage: 1 V max. | |
| Functions | OFF-delay timer | 0 to 40 ms (1 to 20 ms: 1-ms increments, 20 to 40 ms: 5-ms increments) |
| Zero reset | Supported. | |
| Intial reset | Supported. (All settings are returned to their default values.) | |
| Hysteresis setting | 3 to variable | |
| Self diagnosis | Displays errors (sensor disconnection, sensor short-circuit, or output short-circuit) | |
| Operation mode | Changed with NO/NC Switch. | |
| Protection circuits | Power supply reverse polarity protection and output short-circuit protection | |
| Indicator | Operation indicator (orange) | |
| Digital display | Detection amount display (FINE: 4,000 max., NORM: 2,000 max.), bar display, function display (red) | |
| Reverse display | Supported. | |
| Ambient temperature range | Operation: -10 to 55°C, Storage: -25 to 70°C (with no icing or condensation) | |
| Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) | |
| Temperature influence * | ±10% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | |
| Voltage influence | ±1% max. of sensing distance in the rated voltage range ±10% | |
| Insulation resistance | 20 MΩ min. (at 500 VDC) between currentcarrying parts and case | |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute. Between current-carrying parts and case | |
| Vibration resistance | Destruction: 10 to 150 Hz, 1.5-mm double amplitude or 100 m/s2 for 2 hours each in X, Y, and Z directions | |
| Shock resistance | Destruction: 300 m/s2 3 times each in X, Y, and Z directions | |
| Degree of protection | IEC 60529 IP50 (with Sensor cable connected and protective cover attached) | |
| Connection method | Pre-wired (Standard cable length: 2 m) | |
| Weight (packed state) | Approx. 100 g | |
| Materials | Case | PBT |
| Cover | Polycarbonate | |
| Cable connecting screws | Zinc-plated iron | |
| Accessories | E39-L143 Mounting Bracket (SUS304 stainless steel), instruction manual | |
*1. If the Sensor approaches iron or other ferrous metals, the digital display will show negative values.
There are exceptions. Refer to Fast Moving Ferrous Metals in Safety Precautions on Catalog.
*2. When the temperature around the Sensor is stable at 23°C.
Note: You can mount the Amplifier Unit on a DIN Track without using the Mounting Bracket.
Kích thước
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Sensors
E2CY-X1R5A
E2CY-C1R5A-1
E2CY-C2A(F)
* E2CY-C2AF: 2.5-dia. coaxial cable (Fluororesin) with 1 conductor (Conductor cross section: 0.17 mm2),
Standard length: 3 m
Standard length: 3 m
E2CY-V3A
Amplifier Unit
E2CY-SD11
* The dimension to the digital display surface is 29.3 mm, and the dimension to the operation button surface is 29.8 mm.
Note: You can mount the Amplifier Unit on a DIN Track without using the Mounting Bracket.
Note: You can mount the Amplifier Unit on a DIN Track without using the Mounting Bracket.
Hãy là người đầu tiên nhận xét “Cảm biến tiệm cận Omron E2CY-SD”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.