Cảm biến tiệm cận Omron E2FM

Size		M8	M12	M18	M30	M12	M18	M30
Shielded		Shielded
Model		E2FM- X1R5D1-[]	E2FM- X2D1-[]	E2FM- X5D1-[]	E2FM- X10D1[]	E2FM- X2D1- M1T1GJ-T	E2FM- X5D1- M1T1GJ-T	E2FM- X10D1- M1T1GJ-T
Sensing distance		1.5 mm±10%	2 mm ±10%	5 mm ±10%	10 mm ±10%	2 mm±10%	5 mm±10%	10 mm±10%
Set distance		0 to 1.05 mm	0 to 1.4 mm	0 to 3.5 mm	0 to 7 mm	0 to 1.4 mm	0 to 3.5 mm	0 to 7 mm
Differential travel		15% max. of sensing distance
Sensing object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Catalog.)
Standard sensing object		Iron, 8 × 8 × 1 mm	Iron, 12 × 12 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 54 × 54 × 1 mm	Iron, 12 × 12 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 54 × 54 × 1 mm
Response frequency *1		200 Hz	100 Hz	100 Hz	50 Hz	100 Hz	100 Hz	50 Hz
Power supply voltage (operating voltage range)		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current		0.8 mA max.
Output configuration		With polarity				No polarity
Control output	Switching capacity	3 to 100 mA
	Residual voltage	3 V max. (Load current: 100 mA max., Cable length: 2 m)				5 V max. (Load current: 100 mA max., Cable length: 2 m)
Indicators		Operation indicator (red LED), Setting/Operation indicator (green LED)
Operation mode (with sensing object approaching)		NO *2
Protection circuits		Surge suppressor, Load short-circuit protection
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±20% max. of sensing distance at 23°C in the temperature range of -25 to 70°C.
Voltage influence		±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2 10 times each in X, Y, and Z directions	Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67
Connection method		Unmarked: Pre-wired Models (Standard cable length: 2 m) Models ending with -M1GJ-[]: Pre-wired Connector Models (Standard cable length: 300 mm)
Weight (packed state)	Pre-wired Models (2 m)	Approx. 105 g	Approx. 190 g	Approx. 215 g	Approx. 295 g	—	—	—
	Pre-wired Connector Models	Approx. 65 g	Approx. 85 g	Approx. 110 g	Approx. 190 g	Approx. 85 g	Approx. 110 g	Approx. 190 g
Mate- rials	Case	Stainless steel (SUS303)
	Sensing surface (thickness)	Stainless steel (SUS303)
		(0.4 mm)	(0.8 mm)			(0.8 mm)
	Clamping nuts	Stainless steel (SUS303)
	Cable	PVC (flame retardant)
	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

*1. The response frequency of the DC switching section is an average value. Measurement conditions are as follows:
standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing
distance.
*2. NC (normally closed) models are also available. Contact your OMRON representative.

Size		M8	M12	M18	M30
Shielded		Shielded
Model		E2FM-X1R5[]	E2FM-X2[]	E2FM-X5[]	E2FM-X10[]
Sensing distance		1.5 mm±10%	2 mm±10%	5 mm±10%	10 mm±10%
Set distance		0 to 1.05 mm	0 to 1.4 mm	0 to 3.5 mm	0 to 7 mm
Differential travel		15% max. of sensing distance
Sensing object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Catalog.)
Standard sensing object		Iron, 8 × 8 × 1 mm	Iron, 12 × 12 × 1 mm	Iron, 30 × 30 × 1 mm	Iron, 54 × 54 × 1 mm
Response frequency *1		200 Hz	100 Hz	100 Hz	50 Hz
Power supply voltage (operating voltage range)		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption		10 mA max.
Output configuration		PNP open collector output
Control output	Switching capacity	200 mA max.
	Residual voltage	2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicators		Operation indicator (yellow LED)
Operation mode (with sensing object approaching)		C1 Models: NPN open collector, NO (normally open) *2 B1 Models: PNP open collector, NO (normally open) *2
Protection circuits		Reversed power supply polarity protection, Surge suppressor, Load short-circuit protection, and Reversed output polarity protection (except the E2FM-X1R5B1-M1)
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±20% max. of sensing distance at 23°C in the temperature range of -25 to 70°C.
Voltage influence		±1% max. of sensing distance in the rated voltage ±15% range (using the sensing distance at the rated voltage as standard)
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s2 10 times each in X, Y, and Z directions	Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67
Connection method		Unmarked: Pre-wired Models (Standard cable length: 2 m) Models ending with -M1: Connector Models
Weight (packed state)	Pre-wired Models (2 m)	—	Approx. 170 g	Approx. 190 g	Approx. 275 g
	Pre-wired Connector Models	Approx. 45 g	Approx. 55 g	Approx. 75 g	Approx. 160 g
Materials	Case	Stainless steel (SUS303)
	Sensing surface	Stainless steel (SUS303)
	(thickness)	(0.4 mm)	(0.8 mm)
	Clamping nuts	Stainless steel (SUS303)
	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

*1. The response frequency of the DC switching section is an average value. Measurement conditions are as follows:
standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing
distance.
*2. NC (normally closed) models are also available. Contact your OMRON representative.