Chưa có sản phẩm trong giỏ hàng.
Consult with your OMRON representative when ordering any models that are not listed in this table.
Công tắc cửa an toàn Omron D4BL
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Thân nhôm đúc Lực giữ phím 700 N
• Chìa khóa phụ giúp bảo trì dễ dàng và mở khóa cửa trong trường hợp mất điện.
• Thân nhôm đúc kết hợp hộp công tắc với cấp độ bảo vệ đáp ứng IP67, UL và CSA TYPE6P, 13.
• Được trang bị ổ cắm ống dẫn ngang và dọc.
• Có sẵn các kiểu kết hợp các chỉ báo dễ nhìn để theo dõi và các kiểu sử dụng Phím vận hành có thể điều chỉnh cho cửa xoay.
• Có thể thay đổi hướng lắp của đầu để cho phép đưa Phím thao tác vào từ bốn hướng.
Đặc điểm
Switches (Operation Keys are sold separately.)
| Lock method | Conduit outlet | Voltage for solenoid | Without indicator 1NC/1NO+ 1NC (Slow-action) | With LED indicator 1NC/1NO+ 1NC (Slow-action) | Without indicator 2NC+ 1NC (Slow-action) | With LED indicator 2NC+ 1NC (Slow-action) |
|---|---|---|---|---|---|---|
| Mechanical lock | PG13.5 | 24 VDC | D4BL-1CRA | D4BL-1CRA-A | D4BL-1DRA | D4BL-1DRA-A |
| G1/2 | D4BL-2CRA | D4BL-2CRA-A | D4BL-2DRA | D4BL-2DRA-A | ||
| M20 | D4BL-4CRA | D4BL-4CRA-A | D4BL-4DRA | D4BL-4DRA-A | ||
| Solenoid lock | Pg 13.5 | 24 VDC | D4BL-1CRG | D4BL-1CRG-A | D4BL-1DRG | D4BL-1DRG-A |
| G1/2 | D4BL-2CRG | D4BL-2CRG-A | D4BL-2DRG | D4BL-2DRG-A | ||
| M20 | D4BL-4CRG | D4BL-4CRG-A | D4BL-4DRG | D4BL-4DRG-A |
| Lock method | Conduit outlet | Voltage for solenoid | With LED indicator 2NC+ 2NC (Slow-action) |
|---|---|---|---|
| Mechanical lock | G1/2 | 24 VDC | D4BL-2GRD-AT |
Operation Keys
| Mounting type | Model | |
|---|---|---|
| Horizontal mounting |  | D4BL-K1 |
| Vertical mounting |  | D4BL-K2 |
| Adjustable mounting |  | D4BL-K3 |
Thông số kỹ thuật
Standards and EC Directives
Conforms to the following EC Directives:
・ Machinery Directive
・ EN ISO 14119
・ EN 60204-1
Certified Standards
| Certification body | Standard | File No. |
|---|---|---|
| TÜV Rheinland | EN60947-5-1 (certified direct opening) GS-ET-19 | Consult your OMRON representative for details. |
| UL | UL508 | E76675 |
| CSA | CSA C22.2, No.14 | LR45746 |
| CQC (CCC) | GB/T 14048.5 | Consult your OMRON representative for details. |
Certified Standard Ratings
TÜV (EN60947-5-1), CCC (GB/T 14048.5)
| Type | Standard model | Indicator model |
|---|---|---|
| Utilization category | AC-15 | AC-15 |
| Rated operating current (Ie) | 3 A | 6 A |
| Rated operating voltage (Ue) | 250 V | 115 V |
Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device.
UL/CSA (UL508, CSA C22.2 No. 14)
A300
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 120 VAC 240 VAC | 10 A | 60 30 | 6 3 | 7,200 | 720 |
Note: The UL/CSA certified rating for products with indicators (-A) is 6 A/115 VAC.
Characteristics
| Interlock type | Type 2 (EN ISO 14119) | |
|---|---|---|
| Coding level | Low Level coded (EN ISO 14119) | |
| Degree of protection *1 | IP67 (EN60947-5-1) | |
| Durability *2 | Mechanical | 1,000,000 operations min. |
| Electrical | 500,000 operations min. (10 A resistive load at 250 VAC) | |
| Operating speed | 0.05 to 0.5 m/s | |
| Operating frequency | 30 operations/minute max. | |
| Direct opening force *3 | 19.61 N min. (EN60947-5-1) | |
| Direct opening travel *3 | 20 mm min. (EN60947-5-1) | |
| Holding force (Fzh) | 700 N min. (GS-ET-19) | |
| Contact resistance | 50 mΩ max. | |
| Rated insulation voltage (Ui) | 300 V (EN60947-5-1) | |
| Rated frequency | 50/60 Hz | |
| Protection against electric shock | Class I (with ground terminal) | |
| Pollution degree (operating environment) | 3 (EN60947-5-1) | |
| Impulse withstand voltage (Uimp) (EN60947-5-1) | Between terminals of same polarity | 4 kV |
| Between terminals of different polarity | ||
| Between each terminal and ground | ||
| Between solenoid and ground | 2.5 kV | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact gap | 2 × 2 mm min. | |
| Vibration resistance | Malfunction | 10 to 55 Hz, 0.35 mm single amplitude |
| Shock resistance | Destruction | 1,000 m/s2 min. |
| Malfunction | 300 m/s2 min. | |
| Conditional short-circuit current | 100 A (EN60947-5-1) | |
| Conventional enclosed thermal current (Ithe) | 10 A (EN60947-5-1) | |
| Ambient operating temperature | -10 to 55°C (with no icing) | |
| Ambient operating humidity | 95% max. | |
| Weight | Approx. 800 g | |
Note: The above values are initial values.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust, oil or water penetration, do not use the D4BL in places where dust, oil, water, or chemicals may
enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%.
*3. These figures are minimum requirements for safe operation.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust, oil or water penetration, do not use the D4BL in places where dust, oil, water, or chemicals may
enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%.
*3. These figures are minimum requirements for safe operation.
Solenoid Coil Characteristics
| Type | 24 VDC mechanical lock models | 24 VDC solenoid lock models |
|---|---|---|
| Rated operating voltage | 24 VDC (+10%, -15%) (100% ED) | |
| Current consumption | Approx. 300 mA | |
| Insulation class | Class B (130°C or less) | |
Indicator Characteristics
| Rated voltage | 10 to 115 VAC/VDC |
|---|---|
| Current leakage | Approx. 1 mA |
| Color (LED) | Orange, green |
Kích thước
(Unit: mm)
Switches
D4BL-[][]R[]-[]
D4BL-2GRD-AT
Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. There are fluctuations in the contact ON/OFF timing for 2NC contacts. Confirm performance before application.
2. There are fluctuations in the contact ON/OFF timing for 2NC contacts. Confirm performance before application.
Operation Keys
D4BL-K1
D4BL-K2
D4BL-K3
With Operation Key Inserted
D4BL + D4BL-K1
D4BL + D4BL-K2
D4BL + D4BL-K3
Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. In the above diagrams, the Operation Key is inserted from the front.
*1. The insertion radii apply when the rotational center of the Operation Key in on surface A in the figures.
*2. The insertion radii apply when the rotational center of the Operation Key in on the Operation Key installation surface.
2. In the above diagrams, the Operation Key is inserted from the front.
*1. The insertion radii apply when the rotational center of the Operation Key in on surface A in the figures.
*2. The insertion radii apply when the rotational center of the Operation Key in on the Operation Key installation surface.
Indicator Unit
MODEL
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | D4BL | Item list of D4BL |
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | D4BL |  |
Hãy là người đầu tiên nhận xét “Công tắc cửa an toàn Omron D4BL”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.