Chưa có sản phẩm trong giỏ hàng.
Thích hợp cho cửa lớn, nặng.
Công tắc cửa an toàn Omron D4JL
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Lực giữ 3.000 N
Khóa bảo vệ bằng nhựa Công tắc cửa an toàn Lực giữ 3.000 N
Nhiều biến thể để bảo vệ người lao động đi vào khu vực nguy hiểm.
Các mẫu có Chìa khóa bị kẹt (chỉ dành cho các mẫu khóa cơ)
Miễn là một người có chìa khóa bị kẹt khi đi vào khu vực nguy hiểm, anh ta không phải lo lắng về việc ai đó khóa cửa và nhốt anh ta bên trong.
Chỉ có thể mở cửa bằng cách cấp điện cho nam châm điện và sau đó xoay chìa khóa bị kẹt để mở khóa D4JL.
Có ba mươi loại khóa bẫy khác nhau có sẵn để sử dụng trong các ứng dụng có khu vực nguy hiểm liền kề.
Các mẫu có nút nhả phía sau
Nút nhả phía sau cho phép mở khóa cửa từ bên trong khu vực nguy hiểm trong trường hợp khẩn cấp.
Phím trượt đặc biệt
Phím trượt đặc biệt giúp rút ngắn thời gian thiết kế lắp đặt.
Ổ khóa có thể được gắn vào nắp ngăn chặn vô hiệu hóa ngăn các công nhân khác khởi động lại máy.
(Xem Bảng dữ liệu để biết chi tiết.)
Đặc điểm
Switches (Operation Keys are sold separately.)
Consult with your OMRON representative when ordering any models that are not listed in this table.
Standard Models
| Release key type | Indicator | Lock and release types | Contact configuration (door open/closed detection switch and lock monitor switch contacts) | Conduit outlet | Model |
|---|---|---|---|---|---|
| Special release key | Green | Mechanical lock Solenoid release | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFA-C5 |
| M20 | D4JL-4NFA-C5 | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFA-C5 | |||
| M20 | D4JL-4PFA-C5 | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFA-C5 | |||
| M20 | D4JL-4QFA-C5 | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFA-C5 | |||
| M20 | D4JL-4RFA-C5 | ||||
| Solenoid lock Mechanical release | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFG-C5 | ||
| M20 | D4JL-4NFG-C5 | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFG-C5 | |||
| M20 | D4JL-4PFG-C5 | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFG-C5 | |||
| M20 | D4JL-4QFG-C5 | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFG-C5 | |||
| M20 | D4JL-4RFG-C5 | ||||
| Orange | Mechanical lock Solenoid release | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFA-D5 | |
| M20 | D4JL-4NFA-D5 | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFA-D5 | |||
| M20 | D4JL-4PFA-D5 | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFA-D5 | |||
| M20 | D4JL-4QFA-D5 | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFA-D5 | |||
| M20 | D4JL-4RFA-D5 | ||||
| Solenoid lock Mechanical release | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFG-D5 | ||
| M20 | D4JL-4NFG-D5 | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFG-D5 | |||
| M20 | D4JL-4PFG-D5 | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFG-D5 | |||
| M20 | D4JL-4QFG-D5 | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFG-D5 | |||
| M20 | D4JL-4RFG-D5 |
Models with Rear Release Buttons
| Release key type | Indicator | Lock and release types | Contact configuration (door open/closed detection switch and lock monitor switch contacts) | Conduit outlet | Model |
|---|---|---|---|---|---|
| Special release key | Green | Mechanical lock Solenoid release | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFA-C6 |
| M20 | D4JL-4NFA-C6 | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFA-C6 | |||
| M20 | D4JL-4PFA-C6 | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFA-C6 | |||
| M20 | D4JL-4QFA-C6 | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFA-C6 | |||
| M20 | D4JL-4RFA-C6 | ||||
| Orange | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFA-D6 * | ||
| M20 | D4JL-4NFA-D6 * | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFA-D6 * | |||
| M20 | D4JL-4PFA-D6 * | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFA-D6 * | |||
| M20 | D4JL-4QFA-D6 * | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFA-D6 * | |||
| M20 | D4JL-4RFA-D6 * |
* Models with Korean S-mark certification.
Models with Trapped Keys
| Release key type | Indicator | Lock and release types | Contact configuration (door open/closed detection switch and lock monitor switch contacts) | Conduit outlet | Model |
|---|---|---|---|---|---|
| Trapped key *1 | Green | Mechanical lock Solenoid release | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFA-C7-01 |
| M20 | D4JL-4NFA-C7-01 | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFA-C7-01 | |||
| M20 | D4JL-4PFA-C7-01 | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFA-C7-01 | |||
| M20 | D4JL-4QFA-C7-01 | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFA-C7-01 | |||
| M20 | D4JL-4RFA-C7-01 | ||||
| Orange | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFA-D7-01 *2 | ||
| M20 | D4JL-4NFA-D7-01 *2 | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFA-D7-01 *2 | |||
| M20 | D4JL-4PFA-D7-01 *2 | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFA-D7-01 *2 | |||
| M20 | D4JL-4QFA-D7-01 *2 | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFA-D7-01 *2 | |||
| M20 | D4JL-4RFA-D7-01 *2 |
*1. Thirty types of trapped keys can be manufactured. Specify the trapped key type in numerical order starting from 01
when ordering.
*2. Models with Korean S-mark certification.
when ordering.
*2. Models with Korean S-mark certification.
Trapped Key + Rear Release Button type
| Release key type | Indicator | Lock and release types | Contact configuration (door open/closed detection switch and lock monitor switch contacts) | Conduit outlet | Model |
|---|---|---|---|---|---|
| Trapped key | Green | Mechanical lock Solenoid release | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFA-C8-01-SJ * |
| M20 | D4JL-4NFA-C8-01-SJ * | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFA-C8-01-SJ * | |||
| M20 | D4JL-4PFA-C8-01-SJ * | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFA-C8-01-SJ * | |||
| M20 | D4JL-4QFA-C8-01-SJ * | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFA-C8-01-SJ * | |||
| M20 | D4JL-4RFA-C8-01-SJ * | ||||
| Orange | 2NC/1NO + 2NC/1NO | G1/2 | D4JL-2NFA-D8-01-SJ * | ||
| M20 | D4JL-4NFA-D8-01-SJ * | ||||
| 2NC/1NO + 3NC | G1/2 | D4JL-2PFA-D8-01-SJ * | |||
| M20 | D4JL-4PFA-D8-01-SJ * | ||||
| 3NC + 2NC/1NO | G1/2 | D4JL-2QFA-D8-01-SJ * | |||
| M20 | D4JL-4QFA-D8-01-SJ * | ||||
| 3NC + 3NC | G1/2 | D4JL-2RFA-D8-01-SJ * | |||
| M20 | D4JL-4RFA-D8-01-SJ * |
* Models with Korean S-mark certification.
| Release key position | Front | Front and rear release button | |
|---|---|---|---|
| Release key type | Special release key | Special release key | |
| Switch appearance |  | Front | Rear |
| Release key position | Front | Front and rear release button | |
|---|---|---|---|
| Release key type | Trapped key | Special release key | |
| Switch appearance |  | Front | Rear |
Operation Keys
| Type | Model | |
|---|---|---|
| Horizontal mounting |  | D4JL-K1 |
| Vertical mounting |  | D4JL-K2 |
| Adjustable mounting (horizontal) |  | D4JL-K3 |
Slide Keys
| Appearance | Specifications | Contents | Model | Applicable Door Switch |
|---|---|---|---|---|
 | Weight: 3,400 g Mechanical durability: 20,000 operations min. | Slide Key: 1 (Disable-prevention cover and Operation Key D4JL-K2 are already mounted on Slide Key) D4JL mounting tool: 1 Inner lever: 1 Inner lever mounting screws: 2 Door Switch mounting one-way screws: 3 Switch protective cover: 1 Switch protective cover screws: 4 | D4JL-SK40 | D4JL-[][]F[]-[]6 D4JL-[][]FA-[]8-01-SJ rear release button type |
Note: 1. The Door Switch is not included. Select the Door Switch depending on the necessary number of contacts and the
conduit outlet.
2. Perform risk assessment for the equipment in question, configure relay units and other safety circuits, and use
properly.
3. Ask your OMRON representative for information on the D4JL-SK30.
conduit outlet.
2. Perform risk assessment for the equipment in question, configure relay units and other safety circuits, and use
properly.
3. Ask your OMRON representative for information on the D4JL-SK30.
Thông số kỹ thuật
Standards and EC Directives
Conforms to the following EC Directives:
• Machinery Directive
• EN ISO 14119
• EN 60204-1
• GS-ET-19
Certified Standards
| Certification body | Standard | File No. |
|---|---|---|
| TÜV SÜD | EN 60947-5-1 (certified direct opening) | Consult your OMRON representative for details. |
| UL *1 | UL 508, CSA C22.2 No.14 | E76675 |
| CQC (CCC) | GB/T 14048.5 | Consult your OMRON representative for details. |
| KOSHA *2 | EN60947-5-1 | Consult your OMRON representative for details. |
*1. CSA C22.2 No. 14 was certified by UL.
*2. Only certain models have been certified.
Certified Standard Ratings
TÜV (EN 60947-5-1)
| Utilization category | AC-15 | DC-13 |
|---|---|---|
| Rated operating current (Ie) | 3 A | 0.27 A |
| Rated operating voltage (Ue) | 240 V | 250 V |
Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device. This fuse is not built
into the Switch.
into the Switch.
UL/CSA (UL 508, CSA C22.2 No. 14)
A300 (between terminals 12 and 41)
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 120 VAC | 10 A | 60 | 6 | 7,200 | 720 |
| 240 VAC | 30 | 3 | |||
A300 (between all other terminals)
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 240 VAC | 3 A | 30 | 3 | 7,200 | 720 |
Q300
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 125 VDC 250 VDC | 2.5 A | 0.55 0.27 | 0.55 0.27 | 69 | 69 |
Solenoid Coil Characteristics
| Type | 24 VDC |
|---|---|
| Rated operating voltage (100% ED) | 24 VDC +10%, -15% |
| Current consumption | Approx. 200 mA |
| Insulation Class | Class B (130°C max.) |
Indicator Characteristics
| Type | LED | |
|---|---|---|
| Rated voltage | 24 VDC | 24 VDC |
| Current consumption | Approx. 1 mA | Approx. 8 mA |
| Color (LED) | Orange | Green |
Characteristics
| Interlock type | Type 2 (EN ISO 14119) | ||
|---|---|---|---|
| Coding level | Low level coded (EN ISO 14119) | ||
| Degree of protection *1 | IP67 (EN60947-5-1) | ||
| Durability *2 | Mechanical | 1,000,000 operations min. | |
| Trapped key | 10,000 operations min. | ||
| Rear release button | D4JL-[][]FA-[]7-[]: 3,000 operations min. D4JL-[][]FA-[]8-01-SJ: 500 operations min. | ||
| Electrical | 500,000 operations min. (3 A resistive load at 250 VAC) *3 | ||
| Operating speed | 0.05 to 0.5 m/s | ||
| Operating frequency | 30 operations/minute max. | ||
| Direct opening force *4 | 60 N min. (EN60947-5-1) | ||
| Direct opening travel *4 | 15 mm min. (EN60947-5-1) | ||
| Holding force (Fzh) *5 | 3,000 N min. | ||
| Contact resistance | 25 mΩ max. (per contact) | ||
| Minimum applicable load *6 | 1 mA resistive load at 5 VDC (N-level reference value) | ||
| Rated insulation voltage (Ui) | 300 V (EN60947-5-1) | ||
| Rated frequency | 50/60 Hz | ||
| Protection against electric shock | Class II (double insulation)  | ||
| Pollution degree (operating environment) | 3 (EN60947-5-1) | ||
| Impulse withstand voltage (Uimp) (EN60947-5-1) | Between terminals of same polarity | 2.5 kV | |
| Between terminals of different polarity | 4 kV | ||
| Between other terminals and non-current carrying metallic parts | 6 kV | ||
| Insulation resistance | 100 MΩ min. (at 500 VDC) | ||
| Contact gap | 2 × 2 mm min. | ||
| Vibration resistance | Malfunction | 10 to 55 Hz, 0.75 mm single amplitude | |
| Shock resistance | Destruction | 1,000 m/s2 min. | |
| Malfunction | 80 m/s2 min. | ||
| Conditional short-circuit current | 100 A (EN60947-5-1) *7 | ||
| Conventional free air thermal current (Ith) | 10 A (between terminals 12 and 41), 3 A (between all other terminals) (EN60947-5-1) | ||
| Ambient operating temperature | -10 to +55°C (with no icing) | ||
| Ambient operating humidity | 95% max. | ||
| Weight | Approx. 650 g (D4JL-4NFA-C7-01) | ||
Note: The above values are initial values.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust or water penetration, do not use the D4JL in places where foreign material may enter through the
key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For further
conditions, consult your OMRON sales representative.
*3. Do not pass a 3 A, 250 VAC load through more than two circuits.
*4. These figures are minimum requirements for safe operation.
*5. This figure is based on the GS-ET-19 evaluation method.
*6. This value will vary with the switching frequency, environment, and reliability level. Confirm that correct operation is
possible with the actual load beforehand.
*7. Use a 10 A fuse type gI or gG that conforms to IEC 60269 as a short-circuit protection device.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust or water penetration, do not use the D4JL in places where foreign material may enter through the
key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For further
conditions, consult your OMRON sales representative.
*3. Do not pass a 3 A, 250 VAC load through more than two circuits.
*4. These figures are minimum requirements for safe operation.
*5. This figure is based on the GS-ET-19 evaluation method.
*6. This value will vary with the switching frequency, environment, and reliability level. Confirm that correct operation is
possible with the actual load beforehand.
*7. Use a 10 A fuse type gI or gG that conforms to IEC 60269 as a short-circuit protection device.
Kích thước
(Unit: mm)
Switches
D4JL-[][]F[]-C5
D4JL-[][]F[]-D5
D4JL-[][]FA-C6
D4JL-[][]FA-D6
D4JL-[][]FA-C7
D4JL-[][]FA-D7
D4JL-2NFA-[]8-01-SJ
Operation Keys
D4JL-K1
D4JL-K2
D4JL-K3
Note: Unless otherwise specified, a tolerance of ±0.8 mm applies to all Switch dimensions and a tolerance of ±0.4 mm
applies to Operation Key dimensions.
applies to Operation Key dimensions.
Slide Keys
D4JL-SK40
Open Door
Closed Door
With Operation Key Inserted
D4JL + D4JL-K1
(with Front-inserted Operation Key)
D4JL + D4JL-K1
(with Top-inserted Operation Key)
D4JL + D4JL-K2
(with Front-inserted Operation Key)
D4JL + D4JL-K2
(with Top-inserted Operation Key)
D4JL + D4JL-K3
(with Front-inserted Operation key)
D4JL + D4JL-K3
(with Top-inserted Operation key)
* Insertion radii apply when the rotational center of the Operation Key is in line with a line extending from the front or top Head surface.
MODEL
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | D4JL | Item list of D4JL |
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | D4JL |  |
Hãy là người đầu tiên nhận xét “Công tắc cửa an toàn Omron D4JL”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.