Công tắc cửa an toàn Omron D4NL

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: CẢM BIẾN AN TOÀN, OMRON, THIẾT BỊ AN TOÀN Từ khóa: cảm biến áp suất, cảm biến omron, cảm biến omron giá rẻ, đèn báo, đèn báo omron, giá rẻ, nút nhấn, nút nhấn omron

Khóa bảo vệ bán chạy nhất – Công tắc cửa an toàn có sẵn trong một số kiểu nhỏ gọn, đa tiếp xúc.

• Hoạt động có thể lựa chọn hướng chèn phím và cách lắp có thể điều chỉnh được đảm bảo tính linh hoạt khi lắp đặt.

• Có sẵn các công tắc tích hợp với cấu trúc nhiều tiếp điểm.

• Lực giữ phím tối thiểu 1.300 N.

• Có thể được sử dụng cho cả tải tiêu chuẩn và tải siêu nhỏ.

• Dòng sản phẩm bao gồm các mẫu có đầu ra ống dẫn M20.

• Cấp độ bảo vệ IP67.

• Nhiều loại đầu kim loại có sẵn.

Đặc điểm

Switches (Operation Keys are sold separately.)

Consult with your OMRON representative when ordering any models that are not listed in this table.

Head material	Release key position	Release key type	Solenoid voltage/ indicator	Lock and release types	Contact configuration (door open/closed detection switch and lock monitor switch contacts) (slow-action) Certified direct opening NC contact	Conduit outlet	Model
Plastic *1	Bottom	Standard (resin)	Solenoid: 24 VDC Orange LED: 10 to 115 VAC/VDC	Mechanical lock Solenoid release	1NC/1NO+1NC/1NO	Pg13.5	D4NL-1AFA-B
						G1/2	D4NL-2AFA-B
						M20	D4NL-4AFA-B
					1NC/1NO+2NC	Pg13.5	D4NL-1BFA-B
						G1/2	D4NL-2BFA-B
						M20	D4NL-4BFA-B
					2NC+1NC/1NO	Pg13.5	D4NL-1CFA-B
						G1/2	D4NL-2CFA-B
						M20	D4NL-4CFA-B
					2NC+2NC	Pg13.5	D4NL-1DFA-B
						G1/2	D4NL-2DFA-B
						M20	D4NL-4DFA-B
					2NC/1NO+1NC/1NO	Pg13.5	D4NL-1EFA-B
						G1/2	*D4NL-2EFA-B 2**
						M20	*D4NL-4EFA-B 2**
					2NC/1NO+2NC	Pg13.5	D4NL-1FFA-B
						G1/2	*D4NL-2FFA-B 2**
						M20	*D4NL-4FFA-B 2**
					3NC+1NC/1NO	Pg13.5	D4NL-1GFA-B
						G1/2	*D4NL-2GFA-B 2**
						M20	*D4NL-4GFA-B 2**
					3NC+2NC	Pg13.5	D4NL-1HFA-B
						G1/2	*D4NL-2HFA-B 2**
						M20	*D4NL-4HFA-B 2**
				Solenoid lock Mechanical release	1NC/1NO+1NC/1NO	Pg13.5	D4NL-1AFG-B
						G1/2	D4NL-2AFG-B
						M20	D4NL-4AFG-B
					1NC/1NO+2NC	Pg13.5	D4NL-1BFG-B
						G1/2	D4NL-2BFG-B
						M20	D4NL-4BFG-B
					2NC+1NC/1NO	Pg13.5	D4NL-1CFG-B
						G1/2	D4NL-2CFG-B
						M20	D4NL-4CFG-B
					2NC+2NC	Pg13.5	D4NL-1DFG-B
						G1/2	D4NL-2DFG-B
						M20	D4NL-4DFG-B
					2NC/1NO+1NC/1NO	Pg13.5	D4NL-1EFG-B
						G1/2	*D4NL-2EFG-B 2**
						M20	*D4NL-4EFG-B 2**
					2NC/1NO+2NC	Pg13.5	D4NL-1FFG-B
						G1/2	*D4NL-2FFG-B 2**
						M20	*D4NL-4FFG-B 2**
					3NC+1NC/1NO	Pg13.5	D4NL-1GFG-B
						G1/2	*D4NL-2GFG-B 2**
						M20	*D4NL-4GFG-B 2**
					3NC+2NC	Pg13.5	D4NL-1HFG-B
						G1/2	*D4NL-2HFG-B 2**
						M20	*D4NL-4HFG-B 2**
		Special release key (resin)	Solenoid: 24 VDC Orange LED: 10 to 115 VAC/VDC	Mechanical lock Solenoid release	1NC/1NO+1NC/1NO	Pg13.5	D4NL-1AFA-B4
						G1/2	D4NL-2AFA-B4
						M20	D4NL-4AFA-B4
					1NC/1NO+2NC	Pg13.5	D4NL-1BFA-B4
						G1/2	D4NL-2BFA-B4
						M20	D4NL-4BFA-B4
					2NC+1NC/1NO	Pg13.5	D4NL-1CFA-B4
						G1/2	D4NL-2CFA-B4
						M20	D4NL-4CFA-B4
					2NC+2NC	Pg13.5	D4NL-1DFA-B4
						G1/2	D4NL-2DFA-B4
						M20	D4NL-4DFA-B4
					2NC/1NO+1NC/1NO	Pg13.5	D4NL-1EFA-B4
						G1/2	*D4NL-2EFA-B4 2**
						M20	*D4NL-4EFA-B4 2**
					2NC/1NO+2NC	Pg13.5	D4NL-1FFA-B4
G1/2	*D4NL-2FFA-B4 2**
M20	*D4NL-4FFA-B4 2**
3NC+1NC/1NO	Pg13.5				D4NL-1GFA-B4
	G1/2				*D4NL-2GFA-B4 2**
	M20				*D4NL-4GFA-B4 2**
3NC+2NC	Pg13.5				D4NL-1HFA-B4
	G1/2				*D4NL-2HFA-B4 2**
	M20				*D4NL-4HFA-B4 2**
Solenoid lock Mechanical release	1NC/1NO+1NC/1NO			Pg13.5	D4NL-1AFG-B4
				G1/2	D4NL-2AFG-B4
				M20	D4NL-4AFG-B4
	1NC/1NO+2NC			Pg13.5	D4NL-1BFG-B4
				G1/2	D4NL-2BFG-B4
				M20	D4NL-4BFG-B4
	2NC+1NC/1NO			Pg13.5	D4NL-1CFG-B4
				G1/2	D4NL-2CFG-B4
				M20	D4NL-4CFG-B4
	2NC+2NC			Pg13.5	D4NL-1DFG-B4
				G1/2	D4NL-2DFG-B4
				M20	D4NL-4DFG-B4
	2NC/1NO+1NC/1NO			Pg13.5	D4NL-1EFG-B4
				G1/2	*D4NL-2EFG-B4 2**
				M20	*D4NL-4EFG-B4 2**
	2NC/1NO+2NC			Pg13.5	D4NL-1FFG-B4
				G1/2	*D4NL-2FFG-B4 2**
				M20	*D4NL-4FFG-B4 2**
	3NC+1NC/1NO			Pg13.5	D4NL-1GFG-B4
				G1/2	*D4NL-2GFG-B4 2**
				M20	*D4NL-4GFG-B4 2**
	3NC+2NC			Pg13.5	D4NL-1HFG-B4
				G1/2	*D4NL-2HFG-B4 2**
				M20	*D4NL-4HFG-B4 2**
Plastic	Standard (metal)	Solenoid: 24 VDC Orange LED: 10 to 115 VAC/VDC	Mechanical lock Solenoid release	2NC/1NO+1NC/1NO	G1/2	*D4NL-2EFA-B-SJ 2**
				2NC/1NO+1NC/1NO	M20	*D4NL-4EFA-B-SJ 2**
				2NC/1NO+2NC	G1/2	*D4NL-2FFA-B-SJ 2**
				2NC/1NO+2NC	M20	*D4NL-4FFA-B-SJ 2**
				3NC+1NC/1NO	G1/2	*D4NL-2GFA-B-SJ 2**
				3NC+1NC/1NO	M20	*D4NL-4GFA-B-SJ 2**
				3NC+2NC	G1/2	*D4NL-2HFA-B-SJ 2**
				3NC+2NC	M20	*D4NL-4HFA-B-SJ 2**
			Solenoid lock Mechanical release	2NC/1NO+1NC/1NO	G1/2	*D4NL-2EFG-B-SJ 2**
				2NC/1NO+1NC/1NO	M20	*D4NL-4EFG-B-SJ 2**
				2NC/1NO+2NC	G1/2	*D4NL-2FFG-B-SJ 2**
				2NC/1NO+2NC	M20	*D4NL-4FFG-B-SJ 2**
				3NC+1NC/1NO	G1/2	*D4NL-2GFG-B-SJ 2**
				3NC+1NC/1NO	M20	*D4NL-4GFG-B-SJ 2**
				3NC+2NC	G1/2	*D4NL-2HFG-B-SJ 2**
				3NC+2NC	M20	*D4NL-4HFG-B-SJ 2**

*1. Switches with metal heads can also be manufactured upon request. Ask your OMRON representative for details.
*2. Models with Korean S-mark certification.

Operation Keys

Type		Model
Horizontal mounting		D4DS-K1
Vertical mounting		D4DS-K2
Adjustable mounting (Horizontal)		D4DS-K3
Adjustable mounting (Horizontal/Vertical)		D4DS-K5

Thông số kỹ thuật

Standards and EC Directives

Conforms to the following EC Directives:

• Machinery Directive
• Low Voltage Directive
• EN ISO 14119
• EN60947-5-1

Certified Standards

Standard type

Certification body	Standard	File No.
TÜV SÜD	EN60947-5-1 (certified direct opening)	Consult your OMRON representative for details.
UL *1	UL508, CSA C22.2 No.14	E76675
CQC (CCC)	GB/T 14048.5	Consult your OMRON representative for details.
KOSHA *2	EN60947-5-1	Consult your OMRON representative for details.

*1. Certification for CSA C22.2 No. 14 is authorized by the UL mark.
*2. Only certain models have been certified.

Metallic release key type

Certification body	Standard	File No.
TÜV SÜD	EN60947-5-1 (certified direct opening)	Consult your OMRON representative for details.
KOSHA	EN60947-5-1	Consult your OMRON representative for details.

Certified Standard Ratings

TÜV (EN60947-5-1), CCC (GB/T 14048.5)

Utilization category	AC-15	DC-13
Rated operating current (Ie)	3 A	0.27 A
Rated operating voltage (Ue)	240 V	250 V

Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device. This fuse is not built
into the Switch.

UL/CSA (UL508, CSA C22.2 No. 14)

A300

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
120 VAC	10 A	60	6	7,200	720
240 VAC	10 A	30	3	7,200	720

Q300

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
125 VDC	2.5 A	0.55	0.55	69	69
250 VDC	2.5 A	0.27	0.27	69	69

Solenoid Coil Characteristics

Type	24 VDC	110 VAC
Rated operating voltage (100% ED)	24 VDC +10%, -15%	110 VAC ±10%
Current consumption	Approx. 200 mA	Approx. 50 mA
Insulation Class	Class B (130°C max.)

Indicator Characteristics

Type	LED
Rated voltage	10 to 115 VAC/VDC
Current leakage	Approx. 1 mA
Color (LED)	Orange

Characteristics

Interlock type		Type 2 (EN ISO 14119)
Coding level		Low level coded (EN ISO 14119)
*Degree of protection 1**		IP67 (EN60947-5-1)
*Durability 2**	Mechanical	1,000,000 operations min.
*Durability 2**	Electrical	500,000 operations min. (3 A resistive load at 250 VAC) *3
Operating speed		0.05 to 0.5 m/s
Operating frequency		30 operations/minute max.
*Direct opening force 4**		60 N min. (EN60947-5-1)
*Direct opening travel 4**		10 mm min. (EN60947-5-1)
*Holding force (Fzh) 5**		1,300 N min.
Contact resistance		25 mΩ max. (per contact)
*Minimum applicable load 6**		1 mA resistive load at 5 VDC (N-level reference value)
Rated insulation voltage (U_i)		300 V (EN60947-5-1)
Rated frequency		50/60 Hz
Protection against electric shock		Class II (double insulation)
Pollution degree (operating environment)		3 (EN60947-5-1)
Impulse withstand voltage (Uimp) (EN60947-5-1)	Between terminals of same polarity	2.5 kV
	Between terminals of different polarity	4 kV
	Between each terminal and non-current carrying metallic parts	6 kV
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact gap		2 × 2 mm min.
Vibration resistance	Malfunction	10 to 55 Hz, 0.75 mm single amplitude
Shock resistance	Destruction	1,000 m/s² min.
Shock resistance	Malfunction	100 m/s² min.
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional free air thermal current (I_th)		10 A (EN60947-5-1)
Ambient operating temperature		-10 to 55°C (with no icing)
Ambient operating humidity		95% max.
Weight		Approx. 370 g (D4NL-1AFA-B)

Note: 1. The above values are initial values.
2. The Switch contacts can be used with either standard loads or microloads. Once the contacts have been used to
switch a load, however, they cannot be used to switch smaller loads. The contact surfaces will become rough
once they have been used and contact reliability for smaller loads may be reduced.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing
properties are sufficient for the operating conditions and environment beforehand. Although the switch box is
protected from dust or water penetration, do not use the D4NL in places where foreign material may enter through
the key hole on the head, otherwise Switch damage or malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For more details,
consult your OMRON representative.
*3. Do not pass the 3 A, 250 VAC load through more than 2 circuits.
*4. These figures are minimum requirements for safe operation.
*5. This figure is based on the EN ISO 14119 evaluation method.
*6. This value will vary with the switching frequency, environment, and reliability level. Confirm that correct operation is
possible with the actual load beforehand.

Kích thước

(Unit: mm)

Switches

D4NL-[][][][]-B

D4NL-[][][][]-B4

Please click image to enlarge (open in a new window).

D4NL-[][][][]-BS

D4NL-[][][][]-B4S

Please click image to enlarge (open in a new window).

Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. There are fluctuations in the contact ON/OFF timing for Switches with multiple poles (2NC, 2NC/1NO, or 3NC).
Confirm performance before application.