Công tắc cửa an toàn Omron D4SL-N

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: CẢM BIẾN AN TOÀN, OMRON, THIẾT BỊ AN TOÀN Từ khóa: cảm biến áp suất, cảm biến omron, cảm biến omron giá rẻ, đèn báo, đèn báo omron, giá rẻ, nút nhấn, nút nhấn omron

Dòng sản phẩm đa dạng của Công tắc cửa an toàn Guard Lock

Khóa bảo vệ công tắc cửa an toàn D4SL-N

• Giảm thời gian đi dây với hai loại phương pháp đi dây có khả năng gắn và tháo một chạm.

• Có thể sử dụng nhiều loại công tắc tích hợp cho nhiều thiết bị khác nhau. (Có sẵn các mẫu 4-, 5- và 6 tiếp điểm)

• Lực giữ phím 1.300 N.

• Có thể thay đổi điểm chèn phím thao tác mà không cần tháo đầu.

• Điều khiển cuộn dây điện từ trực tiếp từ Bộ điều khiển.

Phím trượt D4SL-NSK10-LK[]

• Chìa khóa khóa để ngăn công nhân bị mắc kẹt bên trong khu vực nguy hiểm.

• Công tắc cửa an toàn D4SL-N Guard Lock dọc có thể dễ dàng gắn trên khung nhôm 40 × 40 mm.

• Chất liệu nhựa giúp Slide Key phù hợp với các loại cửa nhẹ.

Đặc điểm

Release key type	Wiring method	Solenoid voltage/ Indicator	Lock and release type	Contact configuration (door open/closed detection switch and lock monitor switch contacts)	Conduit outlet *	Model
Standard (metal)	Connector	24VDC (Orange)	Mechanical lock Solenoid release	6-contact Model Insert the built-in switch (N, P, Q or R) into the blank [].	G1/2	D4SL-N2[]FA-DN
					1/2-14NPT	D4SL-N3[]FA-DN
					M20	D4SL-N4[]FA-DN
				5-contact Model Insert the built-in switch (E, F, G or H) into the blank [].	G1/2	D4SL-N2[]FA-DN
					1/2-14NPT	D4SL-N3[]FA-DN
					M20	D4SL-N4[]FA-DN
		24VDC (without indicator)		4-contact Model Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank [].	G1/2	D4SL-N2[]FA-N
					1/2-14NPT	D4SL-N3[]FA-N
					M20	D4SL-N4[]FA-N
	Terminal block	24VDC (Orange)		6-contact Model Insert the built-in switch (N, P, Q or R) into the blank [].	G1/2	D4SL-N2[]FA-D
					1/2-14NPT	D4SL-N3[]FA-D
					M20	D4SL-N4[]FA-D
				5-contact Model Insert the built-in switch (E, F, G or H) into the blank [].	G1/2	D4SL-N2[]FA-D
					1/2-14NPT	D4SL-N3[]FA-D
					M20	D4SL-N4[]FA-D
		24VDC (without indicator)		4-contact Model Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank [].	G1/2	D4SL-N2[]FA
					1/2-14NPT	D4SL-N3[]FA
					M20	D4SL-N4[]FA
	Connector	24VDC (Orange)	Solenoid lock Mechanical release	6-contact Model Insert the built-in switch (N, P, Q or R) into the blank [].	G1/2	D4SL-N2[]FG-DN
					1/2-14NPT	D4SL-N3[]FG-DN
					M20	D4SL-N4[]FG-DN
				5-contact Model Insert the built-in switch (E, F, G or H) into the blank [].	G1/2	D4SL-N2[]FG-DN
					1/2-14NPT	D4SL-N3[]FG-DN
					M20	D4SL-N4[]FG-DN
		24VDC (without indicator)		4-contact Model Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank [].	G1/2	D4SL-N2[]FG-N
					1/2-14NPT	D4SL-N3[]FG-N
					M20	D4SL-N4[]FG-N
	Terminal block	24VDC (Orange)		6-contact Model Insert the built-in switch (N, P, Q or R) into the blank [].	G1/2	D4SL-N2[]FG-D
					1/2-14NPT	D4SL-N3[]FG-D
					M20	D4SL-N4[]FG-D
				5-contact Model Insert the built-in switch (E, F, G or H) into the blank [].	G1/2	D4SL-N2[]FG-D
					1/2-14NPT	D4SL-N3[]FG-D
					M20	D4SL-N4[]FG-D
		24VDC (without indicator)		4-contact Model Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank [].	G1/2	D4SL-N2[]FG
					1/2-14NPT	D4SL-N3[]FG
					M20	D4SL-N4[]FG
Special (resin)	Connector	24VDC (Orange)	Mechanical lock Solenoid release	6-contact Model Insert the built-in switch (N, P, Q or R) into the blank [].	G1/2	D4SL-N2[]FA-D4N
					1/2-14NPT	D4SL-N3[]FA-D4N
					M20	D4SL-N4[]FA-D4N
				5-contact Model Insert the built-in switch (E, F, G or H) into the blank [].	G1/2	D4SL-N2[]FA-D4N
					1/2-14NPT	D4SL-N3[]FA-D4N
					M20	D4SL-N4[]FA-D4N
	Terminal block			6-contact Model Insert the built-in switch (N, P, Q or R) into the blank [].	G1/2	D4SL-N2[]FA-D4
					1/2-14NPT	D4SL-N3[]FA-D4
					M20	D4SL-N4[]FA-D4
				5-contact Model Insert the built-in switch (E, F, G or H) into the blank [].	G1/2	D4SL-N2[]FA-D4
					1/2-14NPT	D4SL-N3[]FA-D4
					M20	D4SL-N4[]FA-D4
	Connector		Solenoid lock Mechanical release	6-contact Model Insert the built-in switch (N, P, Q or R) into the blank [].	G1/2	D4SL-N2[]FG-D4N
					1/2-14NPT	D4SL-N3[]FG-D4N
					M20	D4SL-N4[]FG-D4N
				5-contact Model Insert the built-in switch (E, F, G or H) into the blank [].	G1/2	D4SL-N2[]FG-D4N
					1/2-14NPT	D4SL-N3[]FG-D4N
					M20	D4SL-N4[]FG-D4N
	Terminal block			6-contact Model Insert the built-in switch (N, P, Q or R) into the blank [].	G1/2	D4SL-N2[]FG-D4
					1/2-14NPT	D4SL-N3[]FG-D4
					M20	D4SL-N4[]FG-D4
				5-contact Model Insert the built-in switch (E, F, G or H) into the blank [].	G1/2	D4SL-N2[]FG-D4
					1/2-14NPT	D4SL-N3[]FG-D4
					M20	D4SL-N4[]FG-D4

Note: The recommended models for equipment and machinery being exported to Europe are those with an M20 conduit
outlet, and for North America, the recommended models are those with a 1/2-14NPT conduit outlet.

Operation Keys

Type		Model
Horizontal mounting		D4SL-NK1
Horizontal mounting (Short)		D4SL-NK1S
Horizontal mounting (Cushion rubber)		D4SL-NK1G
Vertical mounting		D4SL-NK2
Vertical mounting (Cushion rubber)		D4SL-NK2G
Adjustable (Horizontal)		D4SL-NK3
Adjustable (Horizontal/Vertical)		D4SL-NK5

Connector Cables

Cable length	Model
1 m	D4SL-CN1
3 m	D4SL-CN3
5 m	D4SL-CN5
10 m	D4SL-CN10

Slide Key

Specifications	Contents	Model
Weight: Approx. 0.6 kg Mechanical durability: 20,000 operations min.	Slide Key: 1 (not yet mounted) Inner Lever: None D4SL-N mounting plate: 1 Door Switch special mounting screws: 3 D4SL-NK1 (operation key): 1 D4SL-NK1 special mounting screws: 2 Lockout keys: 2 Lockout key strap: 1 Caution labels (stickers): 2 sheets (English and Japanese)	*D4SL-NSK10-LK 1**
		*D4SL-NSK10-LK-[] 2**
Weight: Approx. 0.1 kg	Inner Lever: 1	*D4SL-SK10H 3**
Weight: Approx. 0.7 kg Mechanical durability: 20,000 operations min.	Slide Key: 1 (not yet mounted) Inner Lever: 1 D4SL-N mounting plate: 1 Door Switch special mounting screws: 3 D4SL-NK1 (operation key): 1 D4SL-NK1 special mounting screws: 2 Lockout keys: 2 Lockout key strap: 1 Caution labels (stickers): 2 sheets (English and Japanese)	*D4SL-NSK10-LKH 1**
		*D4SL-NSK10-LKH-[] 2**

Note: 1. The Door Switch is not included. Select the Door Switch depending on the necessary number of contacts and the
conduit outlet.
The contents are provided as a total set, individual contents cannot be ordered separately.
2. Perform risk assessment for the equipment in question, configure relay units and other safety circuits, and use
properly.
*1. The number for the lockout key is 01.
*2. Replace the box with 02 to 30 (lockout key number). Ask your OMRON representative for delivery times.
*3. The inner lever for D4SL-NSK10 that can not be used for other products and applications.

Thông số kỹ thuật

Standards and EC Directives

Conforms to the following EC Directives:

• Machinery Directive
• Low Voltage Directive
• EMC Directive
• EN ISO 14119
• EN60947-5-1
• GS-ET-19

Certified Standards

Certification body	Standard	File No.
TÜV SÜD	EN60947-5-1 (certified direct opening)	Consult your OMRON representative for details.
UL *1	UL508, CSA C22.2 No.14	E76675
CQC (CCC)	GB/T 14048.5	Consult your OMRON representative for details.
KOSHA *2	EN60947-5-1	Consult your OMRON representative for details.

*1. Certification has been obtained for UL CSA C22.2 No. 14.
*2. Only certain models have been certified.

Certified Standard Ratings

TÜV (EN60947-5-1) CCC (GB/T 14048.5)

Utilization category	AC-15	DC-13
Rated operating current (Ie)	1.5 A 1 1 A 2	0.22 A
Rated operating voltage (Ue)	120 V	125 V

Note: Use a 4 A fuse that conforms to IEC60127 as a short-circuit protection device. This fuse is not included with the switch.
*1. 11-42, 21-52, 21-22
*2. Other terminals

UL/CSA (UL508, CSA C22.2 No.14)

C150

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
120 VAC	2.5 A	15	1.5	1,800	180

R150

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
125 VDC	1.0 A	0.22	0.22	28	28

Solenoid Coil Characteristics

Item	24 VDC
Rated operating voltage (100% ED)	24 VDC +10%, -15%
Current consumption *	Power ON: 6-contact type Approx. 6.4 W at 0.26 A 4-contact/5-contact type Approx. 4.8 W at 0.2 A Constant: Approx. 2.6 W (average) at 0.2 A (max.)
Insulation	Class E (to 120°C)

* A starting current is applied to the solenoid for Approx. 10 seconds.
After this, the internal circuit switches to a constant current.
Note: For solenoid lock models, be sure to supply power to the solenoid after the door is closed (after the operation key
is inserted).
If the door is closed after power is supplied to the solenoid, locking the operation key may not be possible.
For details, refer to “Solenoid Lock Models” on catalog.

Indicator

Item	LED type
Rated voltage	24 VDC
Current consumption	Approx.10 mA
Color (LED)	Orange

Characteristics

Interlock type		Type 2 (EN ISO 14119)
Coding level		Low level coded (EN ISO 14119)
Degree of protection		IP67 *1 TYPE 4X Indoor use only (UL, CSA)
*Durability 2**	Mechanical	1,000,000 operations min.
*Durability 2**	Electrical	150,000 operations min. (1 A resistance at 125 VAC) *3
Operating speed		0.05 to 1 m/s
Operating frequency		4- and 5-contact Model: 30 operations minute max. 6-contact Model: 5 operations minute max.
*Direct opening force 4**		60 N min. (EN60947-5-1)
*Direct opening travel 4**		15 mm min. (EN60947-5-1)
*Holding force 5**		1,300 N min.
Contact resistance		200 mΩ max.
*Minimum applicable load 6**		1 mA resistive load at 5 VDC (N-level reference value)
Rated insulation voltage (Ui)		150 V (EN60947-5-1)
Rated frequency		50/60 Hz
Protection against electric shock		Class II (double insulation)
Pollution degree (operating environment)		3 (EN60947-5-1)
Impulse withstand voltage (Uimp) (EN60947-5-1)	Between terminals of same polarity	1.5 kV
	Between terminals of different polarity	1.5 kV
	Between other terminals and non-current carrying metallic parts	2.5 kV
Insulation resistance		100 Ω min. (at 500 VDC)
Vibration resistance	Malfunction	10 to 55 Hz, 0.35 mm single amplitude
Shock resistance	Malfunction	80 m/s² min.
Shock resistance	Destruction	1,000 m/s² min.
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional free air thermal current (Ith)		2.5A (11-42, 21-52, 21-22) 1A (Others)
Ambient operating temperature		-10 to 55°C (with no icing)
Ambient operations humidity		95% max.
Weight		Head: Resin Approx. 290 g (Connector model) Approx. 330 g (Terminal block model) Head: Metal Approx. 370 g (Connector model) Approx. 410 g (Terminal block model)

Note: 1. The above values are initial values.
2. The Switch contacts can be used with either standard loads or microloads.
Once the contacts have been used to switch a load, however, they cannot be used to switch smaller loads.
The contact surfaces will become rough once they have been used and contact reliability for smaller loads
may be reduced.
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1).
Confirm that sealing properties are sufficient for the operating conditions and environment beforehand.
Although the switch box is protected from dust, oil or water penetration, do not use the D4SL in places where cutting
chips, oil, water or chemicals may enter through the key hole on the head, otherwise Switch damage or
malfunctioning may occur.
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For more details,
consult your OMRON representative.
*3. Do not pass the 1 A, 125 VAC load through more than 3 circuits.
*4. These figures are minimum requirements for safe operation.
*5. This figure is based on the ISO 14119 evaluation method.
*6. This value will vary with the switching frequency, environment, and reliability level.
Confirm that correct operation is possible with the actual load beforehand.

Kích thước

(Unit: mm)

Switches

D4SL-N[][][][]-[]N (Connector Type)

* You can insert and secure a stud or other projection in the 4.5-dia. hole to make the installation even stronger.
For details, refer to “Switch and Operation Key Mounting” on Catalog

D4SL-N[][][][]-[] (Terminal Block Type)

* You can insert and secure a stud or other projection in the 4.5-dia. hole to make the installation even stronger.
For details, refer to “Switch and Operation Key Mounting” on Catalog

Note:Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Operation key

D4SL-NK1

D4SL-NK1S

D4SL-NK1G

D4SL-NK2

D4SL-NK2G

D4SL-NK3

D4SL-NK5

Note:Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Connector Cables

D4SL-CN[]

Please click image to enlarge (open in a new window).

Slide Key

D4SL-NSK10-LK

Please click image to enlarge (open in a new window).

D4SL-NSK10-LKH

Please click image to enlarge (open in a new window).

With Operation Key Inserted

D4SL-N + D4SL-NK1

* Insertion radii apply when the rotational center of the Operation Key is in line with a line extending from the front or top
Head surface.

D4SL-N + D4SL-NK1S

D4SL-N + D4SL-NK1G

D4SL-N + D4SL-NK2

* Insertion radii apply when the rotational center of the Operation Key is in line with a line extending from the front or top
Head surface.

D4SL-N + D4SL-NK2G

D4SL-N + D4SL-NK3

D4SL-N + D4SL-NK5

*1. Insertion radii apply when the rotational center of the Operation Key is in line with a line extending from the front or top
Head surface.
*2. If you use the D4SL-NK5 turned over, the operation key insertion position is 60.3 min. and 61.2 max.

MODEL

STT	Chi tiết	Tiêu đề	Tải xuống
1	DANH SÁCH MODEL	D4SL-N	Item list of D4SL-N

TÀI LIỆU

STT	Chi tiết	Tiêu đề	Tải xuống
1	TÀI LIỆU	D4SL-N

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Công tắc cửa an toàn Omron D4SL-N” Hủy

xem thêm

Công tắc cửa an toàn Omron D4SL-N

Liên Hệ Tư Vấn

Dòng sản phẩm đa dạng của Công tắc cửa an toàn Guard Lock

Khóa bảo vệ công tắc cửa an toàn D4SL-N

Phím trượt D4SL-NSK10-LK[]

Đặc điểm

Operation Keys

Connector Cables

Slide Key

Thông số kỹ thuật

Standards and EC Directives

Conforms to the following EC Directives:

Certified Standards

Certified Standard Ratings

TÜV (EN60947-5-1) CCC (GB/T 14048.5)

UL/CSA (UL508, CSA C22.2 No.14)

C150

R150

Solenoid Coil Characteristics

Indicator

Characteristics

Kích thước

Switches

D4SL-N[][][][]-[]N (Connector Type)

D4SL-N[][][][]-[] (Terminal Block Type)

Operation key

D4SL-NK1

D4SL-NK1S

D4SL-NK1G

D4SL-NK2

D4SL-NK2G

D4SL-NK3

D4SL-NK5

Connector Cables

D4SL-CN[]

Slide Key

D4SL-NSK10-LK

D4SL-NSK10-LKH

With Operation Key Inserted

D4SL-N + D4SL-NK1

D4SL-N + D4SL-NK1S

D4SL-N + D4SL-NK1G

D4SL-N + D4SL-NK2

D4SL-N + D4SL-NK2G

D4SL-N + D4SL-NK3

D4SL-N + D4SL-NK5

MODEL

TÀI LIỆU

Đánh giá

Hãy là người đầu tiên nhận xét “Công tắc cửa an toàn Omron D4SL-N” Hủy

SẢN PHẨM LIÊN QUAN

Đăng nhập