Công tắc đa năng Omron Z-15GD-B

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: CÔNG TẮC ĐA NĂNG, CÔNG TẮC OMRON, OMRON Từ khóa: cảm biến áp suất, cảm biến lưu lượng, cảm biến omron, cảm biến omron giá rẻ, cảm biến tiệm cận, cảm biến tiếp xúc, cảm biến vi quang

Công tắc cơ bản bán chạy nhất với độ chính xác cao và đa dạng

• Công suất chuyển mạch lớn 15 A với độ chính xác lặp lại cao.

• Một loạt các biến thể trong dạng tiếp xúc để bạn lựa chọn: loại cơ bản, tiếp điểm tách rời, tiếp điểm duy trì và loại khe hở tiếp điểm có thể điều chỉnh.

• Có sẵn một loạt các mô hình tiêu chuẩn cho tải vi mô.

• Có sẵn một loạt các mô hình kiểu đầu cuối đúc tích hợp vỏ bảo vệ đầu cuối an toàn.

Đặc điểm

Main Unit

Basic Models (General-purpose)

Actuator		Classification	Standard	High-sensitivity	Extra-high sensitivity	High-capacity	Micro load
		Classification	Standard	High-sensitivity	Extra-high sensitivity	High-capacity	Micro load	Contact gap		G (0.5 mm)	H (0.25 mm)	H2 (0.20 mm)	E (1.8 mm)	H (0.25 mm)
		*Terminal 1**	Model	Model	Model	Model	Model
		Pin plunger			Z-15G	Z-15H	Z-15H2	Z-15E	Z-01H
	Z-15G-B	Pin plunger		Z-15H-B	Z-15H2-B	Z-15E-B	Z-01H-B
Slim spring plunger			Z-15GS	Z-15HS	—	—	Z-01HS
Slim spring plunger			Z-15GS-B	Z-15HS-B	—	—	Z-01HS-B
Short spring plunger			Z-15GD	Z-15HD	—	Z-15ED	Z-01HD
Short spring plunger			Z-15GD-B	Z-15HD-B	—	Z-15ED-B	Z-01HD-B
Panel mount plunger		Low OP	Z-15GQ3	—	—	—	—
		Low OP	Z-15GQ3-B	—		—	—
		Medium OP	Z-15GQ	Z-15HQ		Z-15EQ	Z-01HQ
		Medium OP	Z-15GQ-B	Z-15HQ-B		Z-15EQ-B	Z-01HQ-B
		High OP	Z-15GQ8	—		—	—
		High OP	Z-15GQ8-B	—		—	—
Panel mount roller plunger			Z-15GQ22	Z-15HQ22	—	Z-15EQ22	—
Panel mount roller plunger			Z-15GQ22-B	Z-15HQ22-B	—	Z-15EQ22-B	—
Panel mount cross roller plunger			Z-15GQ21	Z-15HQ21	—	Z-15EQ21	—
Panel mount cross roller plunger			Z-15GQ21-B	Z-15HQ21-B	—	Z-15EQ21-B	—
Leaf spring			Z-15GL	—	—	—	—
Leaf spring			Z-15GL-B	—	—	—	—
Roller leaf spring			Z-15GL2	—	—	—	—
Roller leaf spring			Z-15GL2-B	—	—	—	—
Short hinge lever			Z-15GW21	—	—	—	—
Short hinge lever			Z-15GW21-B	—	—	—	—
Hinge lever		Low OP	Z-15GW	Z-15HW	—	—	—
		Low OP	Z-15GW-B	Z-15HW-B
		Medium OP	Z-15GW3	—
		Medium OP	Z-15GW3-B
		High OP	Z-15GW32
		High OP	Z-15GW32-B
Low-force hinge lever			Z-15GW4	Z-15HW24	—	—	—
Low-force hinge lever			Z-15GW4-B	Z-15HW24-B	—	—	—
Low-force wire hinge lever		Low OP	—	Z-15HW78	—	—	—
		Low OP		Z-15HW78-B
		High OP		Z-15HW52
		High OP		Z-15HW52-B
Short hinge roller lever			Z-15GW22	Z-15HW22	—	Z-15EW22	Z-01HW22
Short hinge roller lever			Z-15GW22-B	Z-15HW22-B	—	Z-15EW22-B	Z-01HW22-B
Short hinge cross roller lever			Z-15GW49	—	—	—	—
Short hinge cross roller lever			Z-15GW49-B	—	—	—	—
Hinge roller lever		Standard	Z-15GW2	Z-15HW2	—	—	—
		Standard	Z-15GW2-B	Z-15HW2-B		—	—
		Large roller	Z-15GW25	—		—	—
		Large roller	Z-15GW25-B	—		—	—
Hinge cross roller lever			Z-15GW54	—	—	—	—
Hinge cross roller lever			Z-15GW54-B	—	—	—	—
Unidirectional short hinge roller lever		Parallel	Z-15GW2277	—	—	—	—
Unidirectional short hinge roller lever		Parallel	Z-15GW2277-B	—	—	—	—
Reverse hinge lever *2			Z-15GM	—	—	—	—
Reverse hinge lever *2			Z-15GM-B	—	—	—	—
Reverse short hinge roller lever *2			Z-15GM22	—	—	—	—
Reverse short hinge roller lever *2			Z-15GM22-B	—	—	—	—
Reverse hinge roller lever *2			Z-15GM2	—	—	—	—
Reverse hinge roller lever *2			Z-15GM2-B	—	—	—	—

*2. The pin plungers of reverse-type models are continuously pressed by the actuator levers with compression coil
springs and the pin plungers are freed by operating the levers. Reverse-type models are highly vibration- and shock-
resistive because the pin plungers are normally pressed.

Minimum Order Lot

The following models are available at the minimum order lot specified below.
Orders must be placed per lot.

Classification	Standard	High-sensitivity	Minimum order lot (pcs)
Classification	Standard	High-sensitivity	Minimum order lot (pcs)	Short spring plunger	Z-15GD-B	—	10
Panel mount plunger	Z-15GQ Z-15GQ-B Z-15GQ8-B	—
			Panel mount roller plunger	Z-15GQ22 Z-15GQ22-B	—
						Panel mount cross roller plunger		Z-15GQ21-B	—
						Short hinge lever		Z-15GW21-B	—
			Hinge lever	Z-15GW Z-15GW-B	—
Low-force hinge lever	Z-15GW4-B	Z-15HW24-B
Low-force hinge wire lever	—	Z-15HW78-B
Short hinge roller lever	Z-15GW22 Z-15GW22-B	—
			Hinge roller lever	Z-15GW2 Z-15GW2-B	—
						Reverse short hinge roller lever		Z-15GM22-B	—
Reverse hinge roller lever	Z-15GM2-B	—

Split-contact Models

Actuator	*Contact gap Terminal 1**	Model
Actuator	*Contact gap Terminal 1**	F (1.0 mm)
Pin plunger		—
Pin plunger		Z-10FY-B
Slim spring plunger		—
Slim spring plunger		Z-10FSY-B
Short spring plunger		—
Short spring plunger		Z-10FDY-B
Panel mount plunger		—
Panel mount plunger		Z-10FQY-B
Panel mount roller plunger		—
Panel mount roller plunger		Z-10FQ22Y-B
Hinge lever		—
Hinge lever		Z-10FWY-B
Short hinge roller lever		—
Short hinge roller lever		Z-10FW22Y-B
Hinge roller lever		—
Hinge roller lever		Z-10FW2Y-B
*Reverse short hinge roller lever 2**		—
*Reverse short hinge roller lever 2**		Z-10FM22Y-B

Maintained-contact Models

Actuator		Model
Pin plunger		Z-15ER
Slim spring plunger		Z-15ESR
Hinge lever		Z-15EWR

Basic Models (Drip-proof Models (Standard, Microload))

Actuator		Classification	Standard		Micro load
		Contact gap	G (0.5 mm)		H (0.25 mm)
		Drip-proof terminal protective cover	Not provided	Provided	Not provided
		*Terminal 1**	Model	Model	Model
Pin plunger			Z-15G55	—	Z-01H55
Pin plunger			Z-15G55-B	Z-15GA55-B5V	Z-01H55-B
Short spring plunger			Z-15GD55	—	Z-01HD55
Short spring plunger			Z-15GD55-B	—	Z-01HD55-B
Spring plunger	Low OP		Z-15GK55	—	—
	Low OP		Z-15GK55-B	—	—
	High OP		Z-15GK355	—	—
	High OP		Z-15GK355-B	Z-15GK3A55-B5V	—
Panel mount plunger			Z-15GQ55	—	—
Panel mount plunger			Z-15GQ55-B	Z-15GQA55-B5V	—
Panel mount roller plunger			Z-15GQ2255	—	—
Panel mount roller plunger			Z-15GQ2255-B	Z-15GQ22A55-B5V	—
Panel mount cross roller plunger			—	—	—
Panel mount cross roller plunger			Z-15GQ2155-B	Z-15GQ21A55-B5V	—
Leaf spring			Z-15GL55	—	—
Leaf spring			Z-15GL55-B	—	—
Roller leaf spring			Z-15GL255	—	—
Roller leaf spring			Z-15GL255-B	—	—
Short hinge lever			Z-15GW2155	—	—
Short hinge lever			Z-15GW2155-B	—	—
Long hinge lever			Z-15GW4455	—	—
Long hinge lever			Z-15GW4455-B	Z-15GW44A55-B5V	—
Hinge lever			Z-15GW55	—	—
Hinge lever			Z-15GW55-B	Z-15GWA55-B5V	—
Short hinge roller lever			Z-15GW2255	—	Z-01HW2255
Short hinge roller lever			Z-15GW2255-B	Z-15GW22A55-B5V	Z-01HW2255-B
Hinge roller lever			Z-15GW255	—	—
Hinge roller lever			Z-15GW255-B	Z-15GW2A55-B5V	—
Unidirectional short hinge roller lever			Z-15GW227755	—	—
Unidirectional short hinge roller lever			Z-15GW227755-B	Z-15GW2277A55-B5V	—
Reverse hinge lever *2			Z-15GM55	—	—
Reverse hinge lever *2			Z-15GM55-B	—	—
Reverse short hinge roller lever *2			Z-15GM2255	—	—
Reverse short hinge roller lever *2			Z-15GM2255-B	—	—
Reverse hinge roller lever *2			Z-15GM255	—	—
Reverse hinge roller lever *2			Z-15GM255-B	—	—
Flexible rod (coil spring) *3			Z-15GNJ55	—	—
Flexible rod (coil spring) *3			Z-15GNJ55-B	—	—

Minimum Order Lot

The following models are available at the minimum order lot specified below.
Orders must be placed per lot.

Classification Contact gap	G (0.5 mm)	Minimum order lot (pcs)
Classification Contact gap	Standard	Minimum order lot (pcs)
Short spring plunger	Z-15GD55-B	10
Spring plunger	Z-15GK55-B
Hinge lever	Z-15GW4455-B Z-15GW55 Z-15GW55-B
			Short hinge roller lever	Z-15GW2255 Z-15GW2255-B
					Hinge roller lever	Z-15GW255-B
					Flexible rod (coil spring)	Z-15GNJ55-B

Basic Models (Drip-proof Models (High-sensitivity))

			H (0.25 mm)
Classification Contact gap Drip-proof terminal protective cover Terminal *			High-sensitivity
			Not provided
			Model
Flexible rod			Z-15HNJS55
(steel wire)			Z-15HNJS55-B

Minimum Order Lot

The following models are available at the minimum order lot specified below.
Orders must be placed per lot.

Classification	High-sensitivity	Minimum order lot (pcs)
Contact gap	H (0.25 mm)	Minimum order lot (pcs)
Flexible rod (steel wire)	Z-15HNJS55-B	10

Accessories (Order Separately)

Drip-proof Terminal Cover (Order Separately)

The Drip-proof Terminal Protective Cover is provided for maintenance for Z-[]A55-B5V Switches.

Name	Model
Drip-proof Terminal Protective Cover	AP-DV

Terminal Covers (Sold Separately)

The Terminal Covers can be attached to Z, A, X, and DZ Switches.
The Terminal Cover is secured with mounting screws and protects the casing and terminal wires from dust, vibration, or fingers, thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections. These sections can be torn open for providing holes for lead cables at desired points.
A terminal cover can’t be used in the case of using an actuator sold separately.

Application		Soldering terminal use	Screw terminal use	Remarks
Material	Mounting direction	Model		Remarks
Phenol resin	Side mounting	AP-A	AP-B	—
Metal press mold	Side mounting	AP1-A	AP1-B	Used for AP-A and AP-B
Vinyl chloride	Side mounting	AP-Z		—

Note: Use a Terminal Cover for screw terminals fir DZ-series Switches with soldering terminals.

Separator (Sold Separately)

Use a Separator when it is difficult to provide a sufficient insulation distance or when using the Switch near metal parts or copper wires.

Model
SEPARATOR FOR Z

Actuators (Sold Separately)

A Switch can be actuated by a cam or an appropriate object, in which case, use one of the following Actuators according to the application.

Actuator		Common to Z and X models
Hinge lever		XAA-1
Hinge roller lever		ZAA-2
Panel mount plunger	Short	ZAQ-3
	Medium	ZAQ-2
	Long	ZAQ-1
Panel mount roller plunger		ZAQ-22

Thông số kỹ thuật

Ratings (Basic, Split-contact and Maintained contact Models)

Z-15 (Except Micro Load and Flexible Rod Models)

Item		Non-inductive load (A)				Inductive load (A)
Item		Resistive load		Lamp load		Inductive load		Motor load
Contact gap	Rated voltage	NC	NO	NC	NO	NC	NO	NC	NO
G, H, H2, E	125 VAC 250 VAC 500 VAC *	15 (10) * 15 (10) * 10		3 2.5 2.5	1.5 1.25 0.75	15 (10) * 15 (10) * 6		5 3 1.5	2.5 1.5 0.75
G	8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	15 15 6 0.5 0.25		3 3 3 0.5 0.25	1.5 1.5 1.5 0.5 0.25	15 10 5 0.05 0.03		5 5 5 0.05 0.03	2.5 2.5 2.5 0.05 0.03
										H, H2	8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	15 15 2 0.4 0.2	3 3 2 0.4 0.2	1.5 1.5 1.4 0.4 0.2	15 10 1 0.03 0.02	5 5 1 0.03 0.02	2.5 2.5 1 0.03 0.02
																		E	8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	15 15 15 0.75 0.3	3 3 3 0.75 0.3	1.5 1.5 1.5 0.75 0.3	15 15 10 0.4 0.2	5 5 5 0.4 0.2	2.5 2.5 2.5 0.4 0.2

* Figures in parentheses are for the Z-15HW52, Z-15HW78(-B) and Z-15H2(-B) models, the AC ratings of these models
are 125 and 250 V only.

Z-15 (Flexible Rod Models)

Rated voltage	Non-inductive load (A)				Inductive load (A)
	Resistive load		Lamp load Inductive load Motor load		Lamp load Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC 250 VAC	15 15		2 1	1 0.5	7 5		2.5 1.5	2 1
125 VAC 250 VAC	15 15		2 1	1 0.5	7 5		2.5 1.5	2 1	8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	15 15 2 0.4 0.2	2 2 2 0.4 0.2	1 1 1 0.4 0.2	7 7 1 0.03 0.02	3 3 1 0.03 0.02	1.5 1.5 0.5 0.03 0.02

Z-10F

Item		Non-inductive load (A)				Inductive load (A)
Item		Resistive load		Lamp load		Inductive load		Motor load
Contact gap	Rated voltage	NC	NO	NC	NO	NC	NO	NC	NO
Series connection	125 VAC 250 VAC	10 10		4 2.5	2 1.5	6 6		5 3	2.5 1.5
	30 VDC 125 VDC 250 VDC	10 1 0.6		4 1 0.6	2 1 0.6	6 0.1 0.05		6 0.1 0.05	3 0.1 0.05
										Parallel connection	125 VAC 250 VAC	6 6	3 2.5	1.5 1.25	4 4	4 2	2 1
											30 VDC 125 VDC 250 VDC	6 0.6 0.3	4 0.6 0.3	2 0.6 0.3	4 0.1 0.05	6 0.1 0.05	3 0.1 0.05

Z-01H

Rated voltage	Resistive load (A)
Rated voltage	NC	NO
125 VAC	0.1
8 VDC	0.1
14 VDC	0.1
30 VDC	0.1

Note: 1. The above current ratings are the values of the steady-state current.
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The normally closed and normally open ratings of reverse hinge lever models are opposite to each other.
6. The AC ratings of molded terminals are 125 and 250 V only.
7. The ratings values apply under the following test conditions:
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%RH
(3) Operating frequency: 20 operations/min

Use the switch within the operating range.

	Z-01H	Z-15[], Z-10FY
Minimum applicable load	5 VDC 1 mA	5 VDC 160 mA

Certified Standard Ratings

Ask your OMRON representative for information on certified models.

UL/CSA (General ratings only)

Rated voltage	Z-15	Z-10F	Z-01H
125 VAC	15A 1/8HP	6A 1/10HP	0.1A
250 VAC	15A 1/4HP	6A 1/8HP	—
480 VAC	15A	6A	—
30 VDC	—	—	0.1A
125 VDC	0.5A	0.6A	—
250 VDC	0.25A	0.3A	—

TÜV (EN61058-1)

Rated voltage	Z-15H[]	Z-15G[]	Z-01H[]
250 VAC	15 A	15 A	—
125 VAC	—	—	0.1 A
30 VDC	—	—	0.1 A

CCC (GB/T14048.5)

Rated voltage	Z-15H[]	Z-15G[]	Z-01H[]
250 VAC	15 A	15 A	—
125 VAC	—	—	0.1 A
30 VDC	—	—	0.1 A

Characteristics

Classification		Z-15 (except micro load and flexible rod)	Z-01H	Z-15 (flexible rod)	Z-10F	Z-15H2
Operating speed		0.01 mm to 1 m/s *1		1 mm to 1 m/s	0.1 mm to 1 m/s *1	0.01 mm to 1 m/s
Operating frequency	Mechanical	240 operations/min		120 operations/min	240 operations/min	240 operations/min
Operating frequency	Electrical	20 operations/min
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		15 mΩ max. (initial value)	50 mΩ max. (initial value)	15 mΩ max. (initial value)	25 mΩ max. (initial value)	15 mΩ max. (initial value)
Dielectric strength		Between contacts of same polarity Contact gap G: 1,000 VAC, 50/60 Hz for 1 min Contact gap H: 600 VAC, 50/60 Hz for 1 min Contact gap E: 1,500 VAC, 50/60 Hz for 1 min		Between contacts of same polarity Contact gap G: 1,000 VAC, 50/60 Hz for 1 min Contact gap H: 600 VAC, 50/60 Hz for 1 min	Between contacts of same polarity Contact gap F: 1,500 VAC, 50/60 Hz for 1 min	Between contacts of same polarity 600VAC, 50/60 Hz for 1 min
Dielectric strength		Between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts 2,000 VAC, 50/60 Hz for 1 min
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude * 5		10 to 20 Hz, 1.5- mm double amplitude *5	10 to 55 Hz, 1.5-mm double amplitude *5
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max. 2 5		50 m/s² max. *5	300 m/s² max. 3 5	100 m/s² max.
Durability	Mechanical	Contact gap G, H: 20,000,000 operations min. Contact gap E: 300,000 operations		1,000,000 operations min.	500,000 operations min. *1	20,000,000 operations min.
Durability	Electrical	Contact gap G, H: 500,000 operations min. Contact gap E: 100,000 operations min.		100,000 operations min.	100,000 operations min.	500,000 operations min.
Degree of protection	General- purpose	IP00
Degree of protection	Drip-proof	Equivalent to IP62 (except terminals)
Degree of protection against electric shock		Class I
Proof tracking index (PTI)		175
Ambient operating temperature	General- purpose	– 25 °C to 80 °C (with no icing)
Ambient operating temperature	Drip-proof	– 15 °C to 80 °C (with no icing)
Ambient operating humidity	General- purpose	35% to 85%RH
Ambient operating humidity	Drip-proof	35% to 95%RH
Weight		Approx. 22 to 58 g		Approx. 42 to 48 g	Approx. 34 to 61 g	Approx. 22 g

*1. The values are for the plunger models. (For the lever models, the values are at the plunger section.) (Consult your
OMRON representative for other models.)
*2. The values are for the Z-15G pin plunger.
*3. The values are for the Z-10FY-B.
*4. The values are for the pin plunger. The durability for models other than the pin plunger is 10,000,000 min.
*5. Malfunction: 1 ms max.

Contacts Specification

Item	Classification	Z-15	Z-01H	Z-10F
Contacts	Shape	Rivet	Single crossbar	Rivet
Contacts	Material	Silver	Gold alloy	Silver
Inrush current	NC	30 A max.	0.1 A max.	40 A max.
Inrush current	NO	15 A max.	0.1 A max.	20 A max.

Kích thước

(Unit: mm)

Mounting

Use M4 screws with plane washers and spring washers to mount the Switch. Tighten each mounting screw securely to a torque of 1.18 to 1.47 Nm.

When mounting the Switch to a panel, use a tightening torque of 2.94 to 4.9 Nm for the hexagonal nuts on the actuator.

Basic Models (General-purpose) and Split-contact Models

Terminals

Please click image to enlarge (open in a new window).

The models, illustrations, and graphics are for screw-terminal models (-B). The “-A” at the end of the model number for solder terminal models has been omitted. For details of the terminals, see above.

Pin Plunger
Z-15G-B, Z-15E-B
Z-15H2-B, Z-01H-B
Z-15H-B, Z-10FY-B

Slim Spring Plunger
Z-15GS-B, Z-01HS-B
Z-15HS-B, Z-10FSY-B

Short Spring Plunger
Z-15GD-B, Z-01HD-B
Z-15HD-B, Z-10FDY-B
Z-15ED-B

Panel Mount Plunger
Z-15GQ-B, Z-01HQ-B
Z-15HQ-B, Z-10FQY-B
Z-15EQ-B, Z-15GQ3-B *
Z-15GQ8-B *

Please click image to enlarge (open in a new window).

Note: 1. Do not use the M12 mounting screw and the case mounting hole at the same time, or excessive pulling force will
be imposed on the switch and the case and cover may be damaged.
2. On the model Z-15GQ3-B, PT can be set to a value larger than that for the Z-15GQ.
3. On the model Z-15GQ8-B, operating position can be adjusted by providing a screw in the plunger section.
4. On the model Z-15GQ8-B, the M3 hole with a depth of 10 mm is a through hole. Take precautions so that no
water or screw lock agent penetrates into the hole.

Panel Mount Roller Plunger
Z-15GQ22-B, Z-15EQ22-B
Z-15HQ22-B, Z-10FQ22Y-B

Panel Mount Cross Roller Plunger
Z-15GQ21-B, Z-15EQ21-B
Z-15HQ21-B

Please click image to enlarge (open in a new window).

Leaf Spring
Z-15GL-B

Roller Leaf Spring
Z-15GL2-B

Short Hinge Lever
Z-15GW21-B

Hinge Lever
Z-15GW-B, Z-15GW32-B
Z-15HW-B, Z-10FWY-B
Z-15GW3-B (Lever Length: 56R) *

Please click image to enlarge (open in a new window).

Low-force Hinge Lever
Z-15GW4-B

Z-15HW24-B

Please click image to enlarge (open in a new window).

Low-force Wire Hinge Lever
Z-15HW52-B
Z-15HW78-B (Lever Length: 110R) *

Please click image to enlarge (open in a new window).

Short Hinge Roller Lever
Z-15GW22-B, Z-01HW22-B
Z-15HW22-B, Z-10FW22Y-B
Z-15EW22-B
Z-15GW2-B , Z-15HW2-B
Z-10FW2Y-B *

Please click image to enlarge (open in a new window).

Short Hinge Cross Roller Lever
Z-15GW49-B
Z-15GW54-B (Lever Length: 48.7R) *

Please click image to enlarge (open in a new window).

Hinge Roller Lever
Z-15GW25-B

Unidirectional Short Hinge Roller Lever
Z-15GW2277-B

Reverse Hinge Lever **
Z-15GM-B

Reverse Short Hinge Roller Lever **
Z-15GM22-B
Z-10FM22Y-B

Reverse Hinge Roller Lever **
Z-15GM2-B

** The pin plungers of reverse-type models are continuously pressed by the actuator levers with compression coil
springs and the pin plungers are freed by operating the levers. Reverse-type models are highly vibration- and shock-
resistive because the pin plungers are normally pressed.

Basic Models (Drip-proof) without Terminal Protective Cover

Terminals

Without Terminal Protective Cover

Note: With reverse action models (Z-15GM), the positions of NO and NC terminals are reversed.

The above illustration is for model without terminal protective cover.

Pin Plunger
Z-15G55-B
Z-01H55-B

Short Spring Plunger
Z-15GD55-B
Z-01HD55-B

Spring Plunger
Z-15GK55-B

Z-15GK355-B

Panel Mount Plunger
Z-15GQ55-B

Panel Mount Roller Plunger
Z-15GQ2255-B

Panel Mount Cross Roller Plunger
Z-15GQ2155-B

Leaf Spring
Z-15GL55-B

Roller Leaf Spring
Z-15GL255-B

Short Hinge Lever
Z-15GW2155-B

Long Hinge Lever
Z-15GW4455-B

Hinge Lever
Z-15GW55-B

Short Hinge Roller Lever
Z-15GW2255-B
Z-01HW2255-B

Hinge Roller Lever
Z-15GW255-B

Unidirectional Short Hinge Roller Lever
Z-15GW227755-B

Reverse Hinge Lever *
Z-15GM55-B

Reverse Short Hinge Roller Lever *
Z-15GM2255-B

Reverse Hinge Roller Lever *
Z-15GM255-B

* The pin plungers of reverse-type models are continuously pressed by the actuator levers with compression coil springs
and the pin plungers are freed by operating the levers.

Flexible Rod (Coil Spring)
Z-15GNJ55-B

Flexible Rod (Steel Wire)
Z-15HNJS55-B

Basic Models (Drip-proof) with Terminal Protective Cover

Pin Plunger
Z-15GA55-B5V

Z-15GK3A55-B5V

Panel Mount Plunger
Z-15GQA55-B5V

Panel Mount Roller Plunger
Z-15GQ22A55-B5V

Panel Mount Cross-roller Plunger
Z-15GQ21A55-B5V

Long Hinge Lever
Z-15GW44A55-B5V

Hinge Lever
Z-15GWA55-B5V

Short Hinge Roller Lever
Z-15GW22A55-B5V

Hinge Roller Lever
Z-15GW2A55-B5V

Unidirectional Short Hinge Roller Lever
Z-15GW2277A55-B5V

Basic Models (Drop-proof) with Modeled terminals

Molded Terminals

L/R Type (The following illustration is the R type.)

D Type

Lead Wire Specifications

Note: 1. No models with molded terminals are approved by UL, CSA, or EN.
2. Molded terminals are not available on all models. Contact your OMRON representative for applicable products.