• HOTLINE: 0978 63 73 78
  • Email: vpevpe9@gmail.com
    • HOTLINE: 0978 63 73 78

    Công tắc dừng khẩn cấp Omron A22NE-PD

    Liên hệ

    phone
    Liên hệ :
    08 88 44 88 99
    phone
    Liên hệ :
    0978 63 73 78
    phone
    Liên hệ :
    0909 63 73 78

    Liên Hệ Tư Vấn




    Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
    Danh mục: , , Từ khóa: , , , , , , ,

    A22NE-PD Mô hình Khối đầu cuối Push-in Plus

    • Kích thước nhỏ của bảng điều khiển được thực hiện bằng cách tiết kiệm không gian và thay đổi hướng đi dây.

    • Vì không có hiện tượng lỏng lẻo trong hệ thống dây điện nên sẽ giảm được công sức bảo trì.

    • Có thể kết hợp tối đa bốn điểm tiếp xúc với nhau trong cấu hình điểm tiếp xúc.

    • Chống dầu IP65 (các mẫu không có đèn) / IP65 (các mẫu có đèn) / Làm sạch ở nhiệt độ cao, áp suất cao IP69K (các mẫu kéo-đặt lại).

    • Có thể phát hiện Bộ Vận hành và Bộ Công tắc đã được lắp đúng cách hay chưa từ trạng thái đóng/mở của tiếp điểm (Chức năng tiếp điểm liên kết với đòn bẩy khóa).*

    * Tất cả các điểm tiếp xúc được khóa liên động với cần khóa. (Trạng thái của cả tiếp điểm NC và tiếp điểm NO đều được chuyển đổi.)

    A22NE-P Mô hình Khối đầu cuối Push-in Plus

    • Kích thước nhỏ của bảng điều khiển được thực hiện bằng cách tiết kiệm không gian và thay đổi hướng đi dây.

    • Vì không có hiện tượng lỏng lẻo trong hệ thống dây điện nên sẽ giảm được công sức bảo trì.

    • Sử dụng cơ chế đòn bẩy khóa có thể vận hành dễ dàng.

    • Có thể kết hợp tối đa sáu điểm tiếp xúc với nhau trong cấu hình điểm tiếp xúc.

    • Chống dầu theo tiêu chuẩn IP65 (các mẫu không có đèn) / IP65 (các mẫu có đèn) / Hỗ trợ làm sạch ở nhiệt độ cao, áp suất cao IP69K (các mẫu kéo-đặt lại).

    Các loại Khối đầu nối trục vít A22E

    • Tăng hiệu quả đi dây bằng cách lắp ba hàng Thiết bị Công tắc. (với Khối công tắc không chiếu sáng, có thể gắn ba Thiết bị cho nhiều tiếp điểm).

    • Được gắn bằng cách sử dụng các đầu cốt uốn kiểu hở (kiểu càng) hoặc kiểu kín (kiểu tròn).

    • Chống dầu theo tiêu chuẩn IP65 (mẫu không có đèn) / IP65 (mẫu có đèn).

    • Một tấm khóa được cung cấp như một tính năng tiêu chuẩn để đảm bảo rằng hộp điều khiển và công tắc không dễ bị tách rời.

    Đặc điểm

    A22NE-PD Push-in Plus Terminal Block Models

    Model Number Structure

    Model Number Legend (Completely Assembled)

    Shipped as a set which includes the Operation Unit, LED Lamp (lighted models only), and Switch Block.

    A22NE-PD / A22NE-P / A22E Lineup 3

    Ordering Information

    List of Models (Completely Assembled)

    Non-lighted Models (Without EMO/EMS Indication)

     

    AppearanceOperationDegree of
    Protection    		Contact
    configuration *    		Set ModelColor of cap
    1111_lu_24_140-dia. head
    Medium Pull-reset
    A22NE-MP-PD[][]-N    		IP65 oil-resistant
    models    		2NCA22NE-MP-PD02-NRed
    2NC, 1NOA22NE-MP-PD12-N
    3NCA22NE-MP-PD03-N
    2NC, 2NOA22NE-MP-PD22-N
    3NC, 1NOA22NE-MP-PD13-N
    4NCA22NE-MP-PD04-N
    1111_lu_24_240-dia. head
    Medium Pull-reset
    A22NE-MP-PD[][]-N-69K    		IP69K2NCA22NE-MP-PD02-N-69K
    2NC, 1NOA22NE-MP-PD12-N-69K
    3NCA22NE-MP-PD03-N-69K
    2NC, 2NOA22NE-MP-PD22-N-69K
    3NC, 1NOA22NE-MP-PD13-N-69K
    4NCA22NE-MP-PD04-N-69K
    1111_lu_24_330-dia. head
    Small Turn-reset
    A22NE-S-PD[][]-N    		IP65 oil-resistant
    models    		2NCA22NE-S-PD02-N
    2NC, 1NOA22NE-S-PD12-N
    3NCA22NE-S-PD03-N
    2NC, 2NOA22NE-S-PD22-N
    3NC, 1NOA22NE-S-PD13-N
    4NCA22NE-S-PD04-N
    1111_lu_24_440-dia. head
    Medium Turn-reset
    A22NE-M-PD[][]-N    		IP65 oil-resistant
    models    		2NCA22NE-M-PD02-N
    2NC, 1NOA22NE-M-PD12-N
    3NCA22NE-M-PD03-N
    2NC, 2NOA22NE-M-PD22-N
    3NC, 1NOA22NE-M-PD13-N
    4NCA22NE-M-PD04-N
    1111_lu_24_560-dia. head
    Large Turn-reset
    A22NE-L-PD[][]-N    		IP65 oil-resistant
    models    		2NCA22NE-L-PD02-N
    2NC, 1NOA22NE-L-PD12-N
    3NCA22NE-L-PD03-N
    2NC, 2NOA22NE-L-PD22-N
    3NC, 1NOA22NE-L-PD13-N
    4NCA22NE-L-PD04-N

     

    * In addition to the above, we also provide the following contact configurations: [1NC], [1NC, 1NO], and [1NC, 2NO]. Ask your OMRON representative for details.

    Lighted Model (Without EMO/EMS Indication)

     

    AppearanceOperationDegree of
    Protection    		Contact
    configuration
    *    		LED Lamp
    voltage    		Set ModelColor
    of cap
    1111_lu_25_140-dia. head
    Medium Turn-reset
    A22NE-M-PD[][]-C    		IP652NC24 V AC/DCA22NE-M-PD02-CRed
    2NC, 1NOA22NE-M-PD12-C
    3NCA22NE-M-PD03-C
    2NC, 2NOA22NE-M-PD22-C
    3NC, 1NOA22NE-M-PD13-C
    4NCA22NE-M-PD04-C

     

    * In addition to the above, we also provide the following contact configurations: [1NC], [1NC, 1NO], and [1NC, 2NO]. Ask your OMRON representative for details.

    Accessories (Order Separately)

    Operation Unit
    Non-lighted

     

    SizeSmall (30 dia.)Medium (40 dia.)Large (60 dia.)
    FunctionDegree of ProtectionSingle item order model
    Pull-resetIP65
    oil-resistant models    		—A22NE-MP-N
    1111_lu_26_2    		—
    IP69K—A22NE-MP-N-69K
    1111_lu_26_3    		—
    Turn-resetIP65
    oil-resistant models    		A22NE-S-N
    1111_lu_26_1    		A22NE-M-N
    1111_lu_26_4    		A22NE-L-N
    1111_lu_26_7
    A22NE-MRO-N
    A22NE-MRO-N-RD
    1111_lu_26_5
    A22NE-MRS-N
    A22NE-MRS-N-RD
    1111_lu_26_6

     

    Lighted

     

    SizeMedium (40 dia.)
    FunctionSealing capabilitySingle item order model
    Turn-resetIP65A22NE-M-L
    1111_lu_27_1

     

    LED lamp

     

    AppearanceLED lightRated voltageModelRemarks
    1111_lu_28_1Red24 VAC/VDCA22NZ-L-RCThese are provided with the
    completely assembled set of
    lighted models. Order LED Lamps
    only when replacing them.

     

    Control Box

     

    ItemAppearanceModelRemarks
    Control Box1111_lu_29_1One hole, yellow boxA22NZ-A-B101YMaterial: Polycarbonate resin.
    For 22.3-mm panel hole diameter.

     

    Note: For details on the accessories common to the screw terminal block models and push-in plus terminal block models, refer to “Common Accessories and Tools (Order Separately)” .

    A22NE-P Push-in Plus Terminal Block Models

    Model Number Structure

    Model Number Legend (Completely Assembled)

    Shipped as a set which includes the Operation Unit, LED Lamp (lighted model only), Mounting Latches, Lighting Units (lighted model only), and Switch Block.

    A22NE-PD / A22NE-P / A22E Lineup 18

    Ordering Information

    List of Models (Completely Assembled)

    Non-lighted Models

     

    AppearanceOperationDegree of
    Protection    		Contact
    configuration *    		Set ModelColor
    of cap
    1111_lu_14_140-dia. head
    Medium Pull-reset
    A22NE-MP-P[][]2-N    		IP65
    oil-resistant
    models    		1NC (1)A22NE-MP-P002-NRed
    1NC, 1NO (2)A22NE-MP-P102-N
    2NC (2)A22NE-MP-P202-N
    2NC, 1NO (3)A22NE-MP-P212-N
    3NC (3)A22NE-MP-P222-N
    1111_lu_14_540-dia. head
    Medium Pull-reset
    A22NE-MP-P[][]2-N-69K    		IP69K1NC (1)A22NE-MP-P002-N-69K
    1NC, 1NO (2)A22NE-MP-P102-N-69K
    2NC (2)A22NE-MP-P202-N-69K
    2NC, 1NO (3)A22NE-MP-P212-N-69K
    3NC (3)A22NE-MP-P222-N-69K
    1111_lu_14_230-dia. head
    Small Turn-reset
    A22NE-S-P[][]2-N    		IP65
    oil-resistant
    models    		1NC (1)A22NE-S-P002-N
    1NC, 1NO (2)A22NE-S-P102-N
    2NC (2)A22NE-S-P202-N
    2NC, 1NO (3)A22NE-S-P212-N
    3NC (3)A22NE-S-P222-N
    1111_lu_14_340-dia. head
    Medium Turn-reset
    A22NE-M-P[][]2-N    		1NC (1)A22NE-M-P002-N
    1NC, 1NO (2)A22NE-M-P102-N
    2NC (2)A22NE-M-P202-N
    2NC, 1NO (3)A22NE-M-P212-N
    3NC (3)A22NE-M-P222-N
    1111_lu_14_460-dia.
    Large Turn-reset
    A22NE-L-P[][]2-N    		1NC (1)A22NE-L-P002-N
    1NC, 1NO (2)A22NE-L-P102-N
    2NC (2)A22NE-L-P202-N
    2NC, 1NO (3)A22NE-L-P212-N
    3NC (3)A22NE-L-P222-N

     

    * The number in parentheses ( ) indicates the number of switch units.

    Lighted Model

     

    AppearanceOperationDegree of
    Protection    		Contact
    configuration *    		LED Lamp
    voltage    		Set ModelColor
    of cap
    1111_lu_15_140-dia. head
    Medium Turn-reset
    A22NE-M-P[][]2-A    		IP651NC (1)6 VAC/VDCA22NE-M-P002-ARed
    1NC, 1NO (2)A22NE-M-P102-A
    2NC (2)A22NE-M-P202-A
    1111_lu_15_240-dia. head
    Medium Turn-reset
    A22NE-M-P[][]2-B    		1NC (1)12 VAC/VDCA22NE-M-P002-B
    1NC, 1NO (2)A22NE-M-P102-B
    2NC (2)A22NE-M-P202-B
    1111_lu_15_340-dia. head
    Medium Turn-reset
    A22NE-M-P[][]2-C    		1NC (1)24 VAC/VDCA22NE-M-P002-C
    1NC, 1NO (2)A22NE-M-P102-C
    2NC (2)A22NE-M-P202-C
    1111_lu_15_440-dia. head
    Medium Turn-reset
    A22NE-M-P[][]2-D    		1NC (1)100, 110,
    120 VAC    		A22NE-M-P002-D
    1NC, 1NO (2)A22NE-M-P102-D
    2NC (2)A22NE-M-P202-D
    1111_lu_15_540-dia. head
    Medium Turn-reset
    A22NE-M-P[][]2-E    		1NC (1)220, 230,
    240 VAC    		A22NE-M-P002-E
    1NC, 1NO (2)A22NE-M-P102-E
    2NC (2)A22NE-M-P202-E

     

    * The number in parentheses ( ) indicates the number of switch units.

    Switch with Integrated Control Box

     

    AppearanceContact configuration
    (Number of switch blocks)    		Model
    1111_lu_16_11NC (1)A22NE-M-P002-N-B
    1NC, 1NO (2)A22NE-M-P102-N-B
    2NC (2)A22NE-M-P202-N-B

     

    Subassembled

    The Operation Unit, LED Lamp, Mounting Latches, Switch Blocks, and Lighting Unit can be ordered separately. Use them in combination for models that are not available as assembled Units. These can also be used as inventory for maintenance parts.

    A22NE-PD / A22NE-P / A22E Lineup 26

    Operation Unit

    Non-lighted

     

    SizeSmall (30 dia.)Medium (40 dia.)Large (60 dia.)
    FunctionSealing capabilitySingle item order model
    Pull-resetIP65
    oil-resistant models    		—A22NE-MP-N
    1111_lu_18_2    		—
    IP69K—A22NE-MP-N-69K
    1111_lu_18_7    		—
    Turn-resetIP65
    oil-resistant models    		A22NE-S-N
    1111_lu_18_1    		A22NE-M-N
    1111_lu_18_3    		A22NE-L-N
    1111_lu_18_6
    A22NE-MRO-N
    A22NE-MRO-N-RD
    1111_lu_18_4
    A22NE-MRS-N
    A22NE-MRS-N-RD
    1111_lu_18_5

     

    Lighted

     

    SizeMedium (40 dia.)
    FunctionSealing capabilitySingle item order model
    Turn-resetIP65A22NE-M-L
    1111_lu_19_1

     

    LED lamp

     

    AppearanceLED lightRated voltageModelRemarks
    1111_lu_20_1Red6 VAC/VDCA22NZ-L-RAThese LED lamps are for exclusive use with the
    A22N and the A22NE-P. These are provided with
    the completely assembled set of lighted models.
    Order LED lamps only when replacing them.
    12 VAC/VDCA22NZ-L-RB
    24 VAC/VDCA22NZ-L-RC
    100, 110, 120 VACA22NZ-L-RD
    200, 220, 230, 240 VACA22NZ-L-RE

     

    Accessories (Order Separately)

     

    ItemAppearanceContact specificationsModelRemarks
    Switch Blocks
    (one contact)    		1111_lu_21_11NO (Blue)Standard loadA22NZ-S-P1AProvided as standard.
    Order Switch Blocks only when
    adding or replacing them.
    1NC (Red)Standard loadA22NZ-S-P1B
    Switch Blocks
    (two contacts)    		1111_lu_21_22NO (Blue)Standard loadA22NZ-S-P2AOrder Switch Blocks only when
    adding or replacing them.
    2NC (Red)Standard loadA22NZ-S-P2B
    1NO/1NC
    (White)    		Standard loadA22NZ-S-P2C
    Lighting unit1111_lu_21_36 VAC/VDCA22NZ-T-APThese are provided with the
    completely assembled set of
    lighted models. Order Lighting
    Units only when replacing
    them.
    12 VAC/VDCA22NZ-T-BP
    24 VAC/VDCA22NZ-T-CP
    100, 110, 120 VACA22NZ-T-DP
    200, 220, 230, 240 VACA22NZ-T-EP
    Mounting
    Latches    		1111_lu_21_4—A22NZ-H-02This Mounting Latch is for
    exclusive use with the
    A22NE-P.
    It is provided with the
    completely assembled set.
    Order Mounting Latches only
    when mounting Switch Blocks
    or Lighting Units that are
    purchased individually.
    Control Boxes
    (Enclosures)    		1111_lu_21_5One hole, yellow boxA22NZ-A-B101YCan be combined with
    2-contact Switch Blocks.
    A22NZ-A-B01YCannot be combined with
    2-contact Switch Blocks. *

     

     

    Note: For details on the accessories common to the screw terminal block types and push-in plus terminal block types,
    refer to “Common Accessories and Tools (Order Separately)” on below.
    * The A22NZ-A-B01Y Control Box cannot be used in combination with the A22Z-3476-1 90-dia. Legend Plates for
    Emergency Stop or the A22Z-EG[]E-stop Shrouds.

     

    A22E Screw Terminal Block types

    Model Number Structure

    Model Number Legend (Completely Assembled)

    Shipped as a set which includes the Operation Unit, LED Lamp (lighted model only), Mounting Latches, Switch Block, and Lock Plate

    A22NE-PD / A22NE-P / A22E Lineup 35

    Ordering Information

    List of Models (Completely Assembled)

    Non-lighted Models (Without EMO/EMS Indication)

     

    AppearanceOperationDegree of
    Protection    		Contact
    configuration *1    		Set ModelColor of cap
    1111_lu_2_140-dia. head
    Medium Pull-reset
    A22E-MP    		IP65
    oil-resistant
    models    		1NC (1)A22E-MP-01Red
    1NC, 1NO (2)A22E-MP-11
    2NC (2)A22E-MP-02
    1111_lu_2_230-dia. head
    Small Turn-reset
    A22E-S    		1NC (1)A22E-S-01 *2
    1NC, 1NO (2)A22E-S-11 *2
    2NC (2)A22E-S-02 *2
    2NC, 1NO (3)A22E-S-12 *2
    3NC (3)A22E-S-03 *2
    1111_lu_2_340-dia. head
    Medium Turn-reset
    A22E-M    		1NC (1)A22E-M-01 *2
    1NC, 1NO (2)A22E-M-11 *2
    2NC (2)A22E-M-02 *2
    2NC, 1NO (3)A22E-M-12 *2
    3NC (3)A22E-M-03 *2
    1111_lu_2_460-dia.
    Large Turn-reset
    A22E-L    		1NC (1)A22E-L-01 *2
    1NC, 1NO (2)A22E-L-11 *2
    2NC (2)A22E-L-02 *2

     

    *1. The number in parentheses ( ) indicates the number of switch units.
    *2. Models with Korean S-mark certification
    Note: Yellow cap models are also available (not for emergency stop use). Contact your OMRON representative.

    Non-lighted Models (With EMO/EMS Indication)

     

    AppearanceOperationDegree of
    Protection    		Contact
    configuration *1    		Set ModelColor of cap
    1111_lu_3_140-dia. head
    Medium Turn-reset
    With EMO Indication    		IP65
    oil-resistant
    models    		1NC (1)A22E-M-01-EMO *2Red
    A22E-M-01-EMO-RD
    1NC, 1NO (2)A22E-M-11-EMO *2
    A22E-M-11-EMO-RD
    2NC (2)A22E-M-02-EMO *2
    A22E-M-02-EMO-RD
    2NC, 1NO (3)A22E-M-12-EMO *2
    A22E-M-12-EMO-RD
    3NC (3)A22E-M-03-EMO *2
    A22E-M-03-EMO-RD
    1111_lu_3_240-dia. head
    Medium Turn-reset
    With EMS Indication    		1NC (1)A22E-M-01-EMS *2
    A22E-M-01-EMS-RD
    1NC, 1NO (2)A22E-M-11-EMS *2
    A22E-M-11-EMS-RD
    2NC (2)A22E-M-02-EMS *2
    A22E-M-02-EMS-RD
    2NC, 1NO (3)A22E-M-12-EMS *2
    A22E-M-12-EMS-RD
    3NC (3)A22E-M-03-EMS *2
    A22E-M-03-EMS-RD

     

     

    *1. The number in parentheses ( ) indicates the number of switch units.
    *2. Models with Korean S-mark certification
    Note: The colors of switch blocks are as follows:
    NO (a-contact): Black
    NC (b-contact): Red
    The above illustration shows the 2NC (2b-contact) configuration.

     

    Lighted Models

     

    AppearanceOperationDegree of
    Protection    		Contact
    configuration *1    		LED Lamp
    voltage    		Set ModelColor
    of cap
    1111_lu_4_140-dia. head
    Push-lock
    Turn-reset
    Lighting unit
    (Direct lighting)
    A22E    		IP651NC (1)6 VAC/VDCA22EL-M-6A-01 *2Red
    12 VAC/VDCA22EL-M-12A-01 *2
    24 VAC/VDCA22EL-M-24A-01 *2
    1NC, 1NO (2)6 VAC/VDCA22EL-M-6A-11 *2
    12 VAC/VDCA22EL-M-12A-11 *2
    24 VAC/VDCA22EL-M-24A-11 *2
    2NC (2)6 VAC/VDCA22EL-M-6A-02 *2
    12 VAC/VDCA22EL-M-12A-02 *2
    24 VAC/VDCA22EL-M-24A-02 *2
    1111_lu_4_240-dia. head
    Push-lock
    Turn-reset
    Lighting unit
    (Voltage-reduction
    lighting)
    A22E    		1NC (1)100 VACA22EL-M-T1-01
    200 VACA22EL-M-T2-01
    1NC, 1NO (2)100 VACA22EL-M-T1-11
    200 VACA22EL-M-T2-11
    2NC (2)100 VACA22EL-M-T1-02
    200 VACA22EL-M-T2-02

     

    *1. The number in parentheses ( ) indicates the number of switch units.
    *2. Models with Korean S-mark certification

    Switch with Integrated Control Box

     

    AppearanceContact configuration
    (Number of switch blocks)    		Model
    1111_lu_5_11NC (1)A22E-M-01B *
    1NC, 1NO (2)A22E-M-11B *
    2NC (2)A22E-M-02B *

     

    Note: The A22Z-B101Y Control Box is used.
    * Models with Korean S-mark certification

    Subassembled

    The Operation Unit, LED Lamp, Mounting Latches, and Switch Blocks can be ordered separately. Use them in combination for models that are not available as assembled Units. These can also be used as inventory for maintenance parts.

    A22NE-PD / A22NE-P / A22E Lineup 46

    Operation Unit

    Non-lighted

     

    SizeSmall (30 dia.)Medium (40 dia.)Large (60 dia.)
    FunctionSealing capabilitySingle item order model
    Pull-resetIP65
    oil-resistant
    models    		—A22E-MP
    1111_lu_7_2    		—
    Turn-resetA22E-S
    1111_lu_7_1    		A22E-M
    1111_lu_7_3    		A22E-L
    1111_lu_7_6
    A22E-M-EMO
    A22E-M-EMO-RD
    1111_lu_7_4
    A22E-M-EMS
    A22E-M-EMS-RD
    1111_lu_7_5

     

    Lighted

     

    SizeMedium (40 dia.)
    FunctionSealing capabilitySingle item order model
    Turn-resetIP65A22EL-M
    1111_lu_8_1

     

    LED lamp

     

    AppearanceLED lightRated voltageModel
    1111_lu_9_1RedStandard6 VAC/VDCA22-6AR
    12 VAC/VDCA22-12AR
    24 VAC/VDCA22-24AR

     

    Note: For a model with a Lighting unit (Voltage-reduction lighting), use the A22-24AR.

    Switch

    Non-lighted / Direct lighting

     

    ClassificationNon-lightedDirect lighting
    Appearance1111_lu_10_11111_lu_10_2
    Contact specifications/
    Configuration (Number of switch blocks)    		ModelModel
    For Standard loads1NC (1)A22-01MA22L-01M
    1NC, 1NO (2)A22-11MA22L-11M
    2NC (2)A22-02MA22L-02M

     

    Voltage-reduction lighting (100 VAC, 200 VAC)

     

    Classification100 VAC, Lighted200 VAC, Lighted
    Appearance1111_lu_11_11111_lu_11_2
    Contact specifications/
    Configuration (Number of switch blocks)    		ModelModel
    For Standard loads1NC (1)A22L-01M-T1A22L-01M-T2
    1NC, 1NO (2)A22L-11M-T1A22L-11M-T2
    2NC (2)A22L-02M-T1A22L-02M-T2

     

    Note: For a model with a Lighting unit (Voltage-reduction lighting), use the A22-24AR.

    Accessories (Order Separately)

     

    ItemAppearanceContact specificationsModelRemarks
    Switch Blocks
    (one contact)    		1111_lu_12_11NO (Black)Standard loadA22-10Provided as standard.
    Order Switch Blocks only when
    adding or replacing them.
    MicroloadA22-10S
    1NC (Red)Standard loadA22-01
    MicroloadA22-01S
    Switch Blocks
    (two contacts)    		1111_lu_12_22NO (Black)Standard loadA22-20Order Switch Blocks only when
    adding or replacing them.
    MicroloadA22-20S
    2NC (Red)Standard loadA22-02
    MicroloadA22-02S
    1NC + 1NO
    Contact
    (Black/Red)    		Standard loadA22-11
    MicroloadA22-11S
    Lighting unit1111_lu_12_3Direct lightingA22-TNUsed when changing the lighting
    method.
    Voltage-
    reduction
    lighting    		100 VACA22-T1
    200 VACA22-T2
    Mounting
    Latches    		1111_lu_12_4—A22-3200Provided as standard.
    Order Mounting Latches only
    when mounting Switch Blocks
    or Lighting Units that are
    purchased individually.
    Lock Plate1111_lu_12_5—A22Z-3380Use to fix the lever on the
    Switch.
    Control Boxes
    (Enclosures)    		1111_lu_12_6One hole, yellow boxA22Z-B101YMaterial: Polycarbonate resin.
    When using a Control Box, 2NO,
    2NC, or 1NC + 1NO two-
    contact Switch Blocks are not
    supported. *
    A22Z-B201Y

     

     

    Note: For details on the accessories common to the screw terminal block types and push-in plus terminal block types,
    refer to “Common Accessories and Tools (Order Separately)” on below.

    * The A22NZ-B101Y and A22NZ-B201Y Control Box cannot be used in combination with the A22Z-3476-1 90-dia.
    Legend Plates for Emergency Stop or the A22Z-EG[] E-stop Shrouds.

     

    Common Accessories and Tools (Order Separately)

    Common to Push-in Plus Terminal Block types (A22NE-PD/A22NE-P)/Screw Terminal Block types (A22E)

     

    ItemAppearanceClassificationModelRemarks
    Legend Plates
    for Emergency
    Stop    		1111_lu_22_160-dia. black letters on
    yellow back-ground    		A22Z-3466-1Used in combination with the rubber packing when the level of protection is to be met between panels. *1
    90-dia. black letters on
    yellow back-ground    		A22Z-3476-1Used in combination with the rubber packing when the level of protection is to be met between panels. *1 *3
    1111_lu_22_260-dia. black letters on
    yellow background    		A22Z-3466-2Used in combination with the rubber packing when the level of protection is to be met between panels. *1
    Hole Plug1111_lu_22_3RoundA22Z-3530Used for covering the panel cutouts for future panel expansion.
    Black color.
    Connectors1111_lu_22_4Applicable
    cable diameter    		7 to 9 dia.A22Z-3500-1Plastic connector used to extend a cable from the Switch Box. (Refer to Data Sheet).
    9 to 11 dia.A22Z-3500-2
    25-dia. Ring1111_lu_22_5—A22Z-R25Use when mounting to a panel with a 25-dia. hole. (Refer to Data Sheet).
    Material: Rubber, Level of protection: IP65
    30-dia.
    Resin
    Attachment    		1111_lu_22_6—A22Z-A30Use when mounting to a panel with a 30-dia. hole. (Refer to Data Sheet).
    A rubber packing is provided with the product.
    Lock Ring1111_lu_22_7—A22Z-3360The body is equipped with a Lock Ring.
    This Lock Ring is used when a more secure lock feature is required. (Refer to Data Sheet).
    Tightening
    Tool    		1111_lu_22_8—A22Z-3905Used for tightening the tightening nut from the back side of the panel, and for removing the cap in lighted models.
    E-stop Shroud
    for EMO,
    Yellow    		1111_lu_22_9—A22Z-EG1Provides SEMI-S2/SEMATECH
    APPLICATION GUIDE FOR SEMI-S2
    compatibility. The SEMI-S2-compatible
    Shroud and legend plate for EMERGENCY
    OFF come as a set. Use with an A22E
    Emergency Stop Switch (for emergency
    shutoff)*2 *3
    E-stop Shroud
    for EMO,
    Yellow    		1111_lu_22_10Legend plate for
    EMERGENCY OFF is not
    included.    		A22Z-EG10Provides SEMI-S2/SEMATECH
    APPLICATION GUIDE FOR SEMI S2
    compatibility. Use with an A22E with EMO
    indication. (for emergency off) *3
    E-stop Shroud
    for EMS,
    White    		1111_lu_22_11—A22Z-EG1-WProvides SEMI-S2/SEMATECH
    APPLICATION GUIDE FOR SEMI-S2
    compatibility. The SEMI-S2-compatible
    Shroud and legend plate for EMERGENCY
    STOP come as a set. Use with an A22E
    Emergency Stop Switch. (for emergency
    stop) *2 *3
    E-stop Shroud
    for EMS,
    White    		1111_lu_22_12Legend plate for
    EMERGENCY STOP is not
    included.    		A22Z-EG10-WProvides SEMI-S2/SEMATECH
    APPLICATION GUIDE FOR SEMI S2
    compatibility. Use with an A22E with EMS
    indication. (for emergency stop) *3
    E-stop Shroud,
    Yellow    		1111_lu_22_13Spacer Unit is not included.A22Z-EG2SEMI-S2/SEMATECH APPLICATION
    GUIDE FOR SEMI S2-compatible Shroud.
    (for emergency shutoff) *2 *3
    Use together with an A22E Emergency
    Stop Switch.
    One Spacer Unit is included.A22Z-EG21
    Two Spacer Units are
    included.    		A22Z-EG22
    E-stop Shroud
    for EMO,
    Yellow    		1111_lu_22_14—A22Z-EG3Provides SEMI-S2/SEMATECH
    APPLICATION GUIDE FOR SEMI-S2
    compatibility. The SEMI-S2-compatible
    Shroud and legend plate for EMERGENCY
    OFF come as a set. Use with an A22E
    Emergency Stop Switch.(for emergency
    shutoff) *2 *3
    Rubber
    Packing    		1111_lu_22_15A22Z-RUsed together with accessories.
    Contains 10 packings.

     

     

    *1. If you use Legend Plates for Emergency Stop, set the thickness of the panels between 1 to 4 mm.
    *2. These Shrouds are for use with the equipment only that conforms to SEMI standards. Do not use them for any
    other applications (e.g. emergency stop switches for machines or devices such as Machine tools, Printing presses,
    Industrial machinery, etc).
    *3. The Control Boxes cannot be used in combination with the A22Z-3476-1 Legend Plates for Emergency Stop or the
    A22Z-EG[] E-stop Shrouds.
    Note: 1. Accessories for A22Z-EG1: one “EMERGENCY OFF” label, two rubber packings, and one lock ring
    2. Accessories for A22Z-EG10: one rubber packing and one lock ring (without label)

    Thông số kỹ thuật

    A22NE-PD Push-in Plus Terminal Block Models

    Certified Standard Ratings

     

    • UL508 (File No. E76675), CSA C22.2 No.14
    5 A at 125 VAC, 3 A at 250 VAC B300
    • TÜV (EN60947-5-1) – Certified direct opening –
    (EN60947-5-5)
    AC-15 3 A at 125 VAC
    DC-13 1 A at 30 VDC
    • CCC (GB/T14048.5)
    AC-15 3 A at 125 VAC
    DC-13 1 A at 30 VDC

     

    Applicable Standards

     

    UL1059, UL486E

    Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device.
    This fuse is not provided in the main unit.

     

    Certified Standards

     

    Certification bodyStandardsFile No.
    UL *UL508, C22.2 No.14E76675
    TÜV SÜDEN60947-5-1(Certified direct opening),
    EN60947-5-5    		Consult your OMRON representative for details.
    CQC (CCC)GB/T14048.5Consult your OMRON representative for details.

     

    Note: Only models with NC contacts have a direct opening mechanism.
    * UL-certification for CSA C22.2 No. 14 has been obtained.

    Ratings

    Contacts (Standard Load)

     

    Rated
    insulation
    voltage (V)    		Rated carry
    current (A)    		Rated
    voltage
    (V)    		Rated current (A)
    AC15
    (Inductive load)    		AC12
    (Resistive load)    		DC13
    (Inductive load)    		DC12
    (Resistive load)
    250530 VAC————
    125 VAC3 A5 A——
    250 VAC1.5 A3 A——
    30 VDC——1 A2 A
    125 VDC——0.22 A0.4 A
    250 VDC——0.1 A0.2 A

     

    Note: 1. The above ratings were obtained by conducting tests under the following conditions.
    (1) Ambient temperature: 20°±2°C
    (2) Ambient humidity: 65±5%
    (3) Operating frequency: 20 operations/minute
    Note: 2. Minimum applicable load: 1 mA at 5 VDC (Resistive load)
    The operating range may vary depending on the usage conditions and type of load.

    LED Lamp (A22NZ-L-RC)

     

    Rated voltageOperating voltageCurrent value
    24 VAC/VDC24 VAC/VDC ± 10%Approx. 12 mA

     

    Characteristics

     

    OperationTurn-resetPull-reset
    Non-lighted modelLighted ModelNon-lighted modelNon-lighted model
    (Models with IP69K)
    A22NE-[]-PD[][]-N-[]A22NE-M-PD[][]-C-[]A22NE-MP-PD[][]-N-[]A22NE-MP-PD[][]-N-69K
    Allowable
    operating
    frequency    		Mechanical30 operations/minute or less (One operation consists of set and reset operations.)
    Electrical30 operations/minute or less (One operation consists of set and reset operations.)
    Insulation resistance *1100 MΩ min. (at 500 VDC)
    Contact resistance100 mΩ max. (initial value)
    Dielectric
    strength    		Between
    terminals of
    same polarity*1    		2,000 VAC, 50/60 Hz 1 minute (initial value)
    Between
    terminals of
    different polarity    		2,000 VAC, 50/60 Hz 1 minute (initial value)
    Between each
    terminal and
    ground    		2,000 VAC, 50/60 Hz 1 minute (initial value)
    Vibration
    resistance    		Malfunction10 to 55 Hz, 1.5 mm double amplitude (contact separation within 1 ms)
    Shock
    resistance    		Malfunction250 m/s2 max. (contact separation within 1 ms)
    DurabilityMechanical300,000 operations min. (One operation consists of set and reset operations.)100,000 operations min.
    (One operation consists of
    set and reset operations.)
    Electrical
    (100 mA at 24
    VAC (Resistive
    load))    		250,000 operations min. (One operation consists of set and reset operations.)100,000 operations min.
    (One operation consists of
    set and reset operations.)
    Electrical
    (3 mA at 250
    VAC (Resistive
    load))    		100,000 operations min. (One operation consists of set and reset operations.)
    Ambient operating temperature *2-20 to +70°C-20 to +55°C-20 to +70°C-20 to +70°C *3
    Ambient operating humidity35 to 85% RH
    Ambient storage temperature *2-40 to +70°C
    Degree of protection *4IP65 oil-resistant modelsIP65IP65 oil-resistant modelsIP69K
    Electric shock protection classClass II
    PTI (tracking characteristic)175
    Degree of contamination3 (EN 60947-5-1)
    Minimum direct opening stroke11 mm
    Minimum direct opening force45 N
    Conditional short-circuit current100 A (EN 60947-5-1)
    Wight (for a 40-dia. head
    2NC/2NO Operation Unit)    		Approx. 95 gApprox. 95 gApprox. 125 gApprox. 135 g

     

    *1. State when an LED is not added between terminals of the same polarity on a lighting unit.
    *2. With no icing or condensation.
    *3. Capable of operation at up to 80°C under IP[]9K testing conditions per JIS D 5020.
    *4. The degree of protection from the front of the panel.

    Operating Characteristics

     

    ItemTurn-resetPull-reset
    Lighted / non-lighted modelsNon-lighted modelNon-lighted model
    (Models with IP69K)
    Total travel force (TTF)45 N max.60 N max.70 N max.
    Return force (RF)0.25N·m max. *60 N max.70 N max.
    Total travel (TT)10 ±1 mm5.5 ±1 mm

     

    * Rotation torque value.

    Terminal Arrangement (BOTTOM VIEW)

    A22NE-PD / A22NE-P / A22E Specifications 14

    Please click image to enlarge (open in a new window).

    Terminal Arrangement

    A22NE-PD / A22NE-P / A22E Specifications 15

    Please click image to enlarge (open in a new window).

    A22NE-P Push-in Plus Terminal Block Models

    Certified Standard Ratings

     

    • UL508 (File No. E76675), CSA C22.2 No.14
    6 A at 240 VAC, 10 A at 120 VAC
    • TÜV (EN60947-5-1) – Certified direct opening –
    (EN60947-5-5)
    AC-15 3 A at 240 VAC
    DC-13 4 A at 24 VDC
    • CCC (GB/T14048.5)
    AC-15 3 A at 240 VAC
    DC-13 4 A at 24 VDC

     

    Applicable Standards

     

    UL1059, UL486E (Push-in Plus Terminal Block Types)

    Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a short-circuit protection device. This fuse is not
    provided in the main unit.

     

    Certified Standards

     

    Certification bodyStandardsFile No.
    UL *UL508, C22.2 No.14E76675
    TÜV SÜDEN60947-5-1 (Certified direct opening),
    EN60947-5-5    		Consult your OMRON representative for details.
    CQC (CCC)GB/T14048.5Consult your OMRON representative for details.

     

    Note: Only models with NC contacts have a direct opening mechanism.
    * UL-certification for CSA C22.2 No. 14 has been obtained.

    Ratings

    Contacts (Standard Load)

     

    Rated
    insulation
    voltage (V)    		Rated carry
    current (A)    		Rated
    voltage
    (V)    		Rated current (A)
    AC15
    (Inductive load)    		AC12
    (Resistive load)    		DC13
    (Inductive load)    		DC12
    (Resistive load)
    6001024 VAC1010——
    120 VAC610
    240 VAC36
    380 VAC1.92
    440 VAC1.62
    24 VDC——48
    120 VDC1.12.2
    240 VDC0.551.1

     

     

    Note: 1. The above ratings were obtained by conducting tests under the following conditions.
    (1) Ambient temperature: 20°±2°C
    (2) Ambient humidity: 65±5%
    (3)Operating frequency: 20 operations/minute
    2. Minimum applicable load: 10 mA at 5 VDC (Resistive load)
    The operating range may vary depending on the usage conditions and type of load.

     

    LED Lamp

     

    Rated voltageOperating voltageCurrent value
    6 VAC/VDC6 VAC/VDC ± 10%Approx. 11 mA
    12 VAC/VDC12 VAC/VDC ± 10%Approx. 12 mA
    24 VAC/VDC24 VAC/VDC ± 10%Approx. 12 mA
    100 VAC100 VAC ± 10%Approx. 12 mA
    110 VAC110 VAC ± 10%
    120 VAC100 VAC to 130 VAC
    200 VAC200 VAC ± 10%Approx. 12 mA
    220 VAC220 VAC ± 10%
    230 VAC230 VAC ± 10%
    240 VAC220 VAC to 250 VAC

     

    Characteristics

     

    OperationTurn-resetPull-reset
    Non-lighted modelLighted ModelNon-lighted model
    A22NE-[]-P[][][]-NA22NE-M-P[][][]-[]A22NE-MP-P[][][]-NA22NE-MP-P[][][]-N-69K
    Allowable
    operating
    frequency    		Mechanical30 operations/minute or less
    (One operation consists of set and reset operations.)
    Electrical30 operations/minute or less
    (One operation consists of set and reset operations.)
    Insulation resistance *1100 MΩ min. (at 500 VDC)
    Contact resistance100 mΩ max. (initial value)
    Dielectric
    strength    		Between
    terminals of
    same polarity
    *1    		2,500 VAC, 50/60 Hz 1 minute (initial value)
    Between each
    terminal and
    ground    		2,500 VAC, 50/60 Hz 1 minute (initial value)
    Vibration
    resistance    		Malfunction10 to 55 Hz, 1.5 mm double amplitude (contact separation within 1 ms)
    Shock
    resistance    		Malfunction250 m/s2 max. (contact separation within 1 ms)
    DurabilityMechanical300,000 operations min.
    (One operation consists of set and reset operations.)    		100,000 operations min.
    (One operation consists of
    set and reset operations.)
    Electrical300,000 operations min.
    (One operation consists of set and reset operations.)    		100,000 operations min.
    (One operation consists of
    set and reset operations.)
    Ambient operating
    temperature *2    		-20 to +70°C-20 to +55°C-20 to +70°C-20 to +70°C *3
    Ambient operating
    humidity    		35 to 85% RH
    Ambient storage
    temperature *2    		-40 to +70°C
    Degree of protection*4IP65 oil-resistant models *5IP65IP65 oil-resistant models *5IP69K
    Electric shock
    protection class    		Class II
    PTI
    (tracking characteristic)    		175
    Degree of contamination3 (EN 60947-5-1)
    Minimum direct
    opening stroke    		11 mm
    Minimum direct
    opening force    		45 N
    Conditional
    short-circuit current    		100 A (EN 60947-5-1)
    Wight (for a 40-dia. Head
    1NC/1NO Operation Unit)    		Approx. 55 gApprox. 60 gApprox. 85 gApprox. 115 g

     

     

    *1. State when an LED is not added between terminals of the same polarity on a lighting unit. Does not apply to
    lighted-type 100 to 200 V lighting units.
    *2. With no icing or condensation.
    *3. Capable of operation at up to 80°C under IP[]9K testing conditions per JIS D 5020.
    *4. The degree of protection from the front of the panel.
    *5. The degree of protection is IP65 even with an integrated control box, but the system is not oil resistant.

     

    Operating Characteristics

     

    ItemTurn-resetPull-reset
    Lighted /
    non-lighted models    		Non-lighted modelNon-lighted model
    (Models with IP69K)
    Total travel force (TTF)45 N max.60 N max.70 N max.
    Return force (RF)0.25N·m * max.60 N max.70 N max.
    Total travel (TT)10 ±1 mm5.5 ±1 mm5.5 ±1 mm

     

    * Rotation torque value.

    Terminal Arrangement (BOTTOM VIEW)

    A22NE-PD / A22NE-P / A22E Specifications 29

    Please click image to enlarge (open in a new window).

    Terminal connection

    A22NE-PD / A22NE-P / A22E Specifications 30

    Please click image to enlarge (open in a new window).

    Terminal wiring drawings of two-contact Switch Units

    A22NE-PD / A22NE-P / A22E Specifications 31

    A22E Screw Terminal Block types

    Certified Standard Ratings

     

    • UL, cUL (File No. E41515)
    6 A at 220 VAC, 10 A at 110 VAC
    • TÜV (EN60947-5-1) (Low Voltage Directive)
    3 A at 220 VAC
    • CCC (GB14048.5)
    3 A at 240 VAC, 1.5 A at 24 VDC

     

    Certified Standards

     

    Certification bodyStandardsFile No.
    UL *1UL508, C22.2 No.14E41515
    TÜV SÜDEN60947-5-1 (Certified direct opening),
    EN60947-5-5    		Consult your OMRON representative for details.
    CQC (CCC)GB/T14048.52003010303070635
    KOSHA *2EN60947-5-1Consult your OMRON representative for details.

     

    Note: 1. Only models with NC contacts have a direct opening mechanism.
    2. A fuse is not provided.
    *1. UL-certification for CSA C22.2 No. 14 has been obtained.
    Certification has been obtained for individual Switch Blocks and Lighting Units.
    *2. Some models have been certified.

    Ratings

    Contacts (Standard Load)

     

    Rated carry
    current (A)    		Rated
    voltage (V)    		Rated current (A)
    AC15
    (Inductive load)    		AC12
    (Resistive load)    		DC13
    (Inductive load)    		DC12
    (Resistive load)
    1024 VAC1010——
    110 VAC510
    220 VAC36
    380 VAC23
    440 VAC12
    24 VDC——1.510
    110 VDC0.52
    220 VDC0.20.6
    380 VDC0.10.2

     

     

    Note: 1. Rated current values are determined according to the testing conditions. The above ratings were obtained by
    conducting tests under the following conditions.
    (1) Ambient temperature: 20°±2°C
    (2) Ambient humidity: 65±5%
    (3)Operating frequency: 20 operations/minute
    2. Minimum applicable load: 10 mA at 5 VDC

     

    Contacts (Microload)

     

    Rated applicable load100 mA at 30 VDC (Resistive load)
    Minimum applicable load1 mA at 5 VDC

     

    LED Lamp

     

    Rated voltageOperating voltageCurrent value
    6 VAC/VDC6 VAC/VDC ± 5%Approx. 8 mA
    12 VAC/VDC12 VAC/VDC ± 5%
    24 VAC/VDC24 VAC/VDC ± 5%

     

    Voltage-reduction lighting

     

    Rated voltageOperating voltageRated currentApplicable lamp
    (BA9S/Base: 13)
    110 VAC100 VAC
    (95 to 115 V)    		Approx. 8 mALED lamp
    A22-24A[]
    220 VAC200 VAC
    (190 to 230 V)

     

    Characteristics

     

    TypeTurn-resetPull-reset
    Non-lighted modelLighted modelNon-lighted model
    Allowable
    operating
    frequency    		Mechanical30 operations/minute (One operation consists of set and reset operations.)
    Electrical30 operations/minute (One operation consists of set and reset operations.)
    Insulation resistance100 MΩ min. (at 500 VDC)
    Contact resistance100 mΩ max. (initial value)
    Dielectric
    strength    		Between terminals
    of same polarity    		2,500 VAC, 50/60 Hz for 1 min.
    Between each
    terminal and ground    		2,500 VAC, 50/60 Hz for 1 min.
    Vibration resistance10 to 55 Hz, 1.5-mm double amplitude (contact separation within 1 ms)
    Shock
    resistance    		Destruction1000 m/s2
    Malfunction250 m/s2 max. (contact separation within 1 ms)
    DurabilityMechanical300,000 operations min. (One operation consists of set and reset operations.)
    Electrical300,000 operations min. (One operation consists of set and reset operations.)
    Ambient operating temperature *1-20 to +70°C-20 to +55°C-20 to +70°C
    Ambient operating humidity35 to 85% RH
    Ambient storage temperature-40 to +70°C
    Degree of protectionIP65 oil-resistant models *2 *3IP65 *2IP65 oil-resistant models *2 *3
    Electric shock protection classClass II
    PTI (tracking characteristic)175
    Degree of contamination3 (EN60947-5-1)
    Minimum direct opening stroke11 mm
    Minimum direct opening force45 N
    Conditional short-circuit current100 A (EN 60947-5-1)
    Weight (for a 40-dia. head 1NC/1NO
    Operation Unit)    		Approx. 65 gApprox. 80 gApprox. 100 g

     

    *1. With no icing or condensation.
    *2. The degree of protection from the front of the panel.
    *3. The degree of protection is IP65 even with an integrated control box, but the system is not oil resistant.

    Operating Characteristics

     

    ItemTurn-resetPull-reset
    Total travel force (TTF)44.1 N max.58.8 N max.
    Return force (RF)0.25 N·m max. *58.8 N max.
    Total travel (TT)10 ±1 mm5.5 ±1 mm

     

    * Rotation torque value.

    Terminal Arrangement (BOTTOM VIEW)

    A22NE-PD / A22NE-P / A22E Specifications 46

    Terminal connection

    A22NE-PD / A22NE-P / A22E Specifications 47

    Please click image to enlarge (open in a new window).

    Terminal wiring drawings of two-contact Switch Units

    A22NE-PD / A22NE-P / A22E Specifications 48

    Kích thước

    (Unit: mm)

    A22NE-PD Push-in Plus Terminal Block Models

    Non-lighted Models

    A22NE-MP-PD[][]-N
    Pull-reset (40-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 3

    A22NE-MP-PD[][]-N-69K
    Pull-reset (40-dia.) Degree of Protection: IP69K

    A22NE-PD / A22NE-P / A22E Dimensions 4

    A22NE-S-PD[][]-N
    Small Turn-reset (30-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 5

    A22NE-M-PD[][]-N
    Medium Turn-reset (40-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 6

    Note: The dimensions the same even if the Operation Unit is replaced with the A22NE-MR[]-N or the A22NE-MR[]-N-RD.

    A22NE-L-PD[][]-N
    Large Turn-reset (60-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 8

    Lighted Model

    A22NE-M-PD[][]-C
    Medium Turn-reset (40-dia.) Degree of Protection: IP65

    A22NE-PD / A22NE-P / A22E Dimensions 9

    Note: Unless otherwise specified, a tolerance of ±0.8mm applies to all dimensions.

    Accessories (Order Separately)

    LED Lamp

    A22NZ-L-RC

    A22NE-PD / A22NE-P / A22E Dimensions 12

    Note: For details on the accessories common to the screw terminal block types and push-in plus terminal block types, refer to “Common Accessories and Tools (Order Separately)”.

    A22NE-P Push-in Plus Terminal Block Models

    Non-lighted Models

    A22NE-MP-P[][]2-N
    Pull-reset (40-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 16

    A22NE-MP-P[][]2-N-69K
    Pull-reset (40-dia.) Degree of Protection: IP69K

    A22NE-PD / A22NE-P / A22E Dimensions 17

    A22NE-S-P[][]2-N
    Small Turn-reset (30-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 18

    A22NE-M-P[][]2-N
    Medium Turn-reset (40-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 19

    Note: The dimensions the same even if the Operation Unit is replaced with the A22NE-MR[]-N or the A22NE-MR[]-N-RD.

    A22NE-L-P[][]2-N
    Large Turn-reset (60-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 21

    Lighted Model

    A22NE-M-P[][]2-[]
    Medium Turn-reset (40-dia.) Degree of Protection: IP65

    A22NE-PD / A22NE-P / A22E Dimensions 23

    Note: Unless otherwise specified, a tolerance of ±0.8mm applies to all dimensions.

    Dimensions when a two-contact Switch Block is attached

    A22NE-PD / A22NE-P / A22E Dimensions 25

    Accessories (Order Separately)

    Switch Block with Push-In Plus technology

    Switch Block (one contact)

    A22NZ-S-P1[]

    A22NE-PD / A22NE-P / A22E Dimensions 28

    Switch Block (two contacts)

    A22NZ-S-P2[]

    A22NE-PD / A22NE-P / A22E Dimensions 29

    Lighting unit

    A22NZ-T-[]P

    A22NE-PD / A22NE-P / A22E Dimensions 30

    Mounting Latches

    A22NZ-H-02

    A22NE-PD / A22NE-P / A22E Dimensions 31

    LED Lamp

    A22NZ-L-[][]

    A22NE-PD / A22NE-P / A22E Dimensions 32

    Control Box

    A22NZ-A-B01Y

    A22NE-PD / A22NE-P / A22E Dimensions 33

    Control Box

    A22NZ-A-B101Y

    A22NE-PD / A22NE-P / A22E Dimensions 34

    Note: For details on the accessories common to the screw terminal block types and push-in plus terminal block types, refer to “Common Accessories and Tools (Order Separately)” on below.

    A22E Screw Terminal Block types

    Non-lighted Models

    A22E-MP
    Medium Pull-reset (40-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 38

    A22E-S
    Small Turn-reset (30-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 39

    A22E-M
    Medium Turn-reset (40-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 40

    Note: The dimensions are the same as for EMO/EMS indication models.

    A22E-L
    Large Turn-reset (60-dia.)Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 42

    Note: Unless otherwise specified, a tolerance of ±0.8mm applies to all dimensions.

    Lighted Model

    A22EL-M
    Medium Turn-reset (40-dia.) Degree of Protection: IP65 oil-resistant models

    A22NE-PD / A22NE-P / A22E Dimensions 45

    Switch dimensions when mounted to a 2NO (2NC) one-piece switch block

    A22NE-PD / A22NE-P / A22E Dimensions 46

    Note: The operation unit is an example for the A22E-M.

    Note: Unless otherwise specified, a tolerance of ±0.8mm applies to all dimensions.

    Accessories (Order Separately)

    LED Lamp

    A22-6[], 12[], 24[]

    A22NE-PD / A22NE-P / A22E Dimensions 49

    Control Box

    A22Z-B101Y (1-hole)

    A22NE-PD / A22NE-P / A22E Dimensions 50

    Cable Draw-out Hole (Top View)

    A22NE-PD / A22NE-P / A22E Dimensions 51

    A22Z-B201Y (1-hole)

    A22NE-PD / A22NE-P / A22E Dimensions 52

    Cable Draw-out Hole (Top View)

    A22NE-PD / A22NE-P / A22E Dimensions 53

     

    Note: For details on the accessories common to the screw terminal block types and push-in plus terminal block types,
    refer to “Common Accessories and Tools (Order Separately)” on below.

     

    Common Accessories and Tools (Order Separately)

    Common to Push-in Plus Terminal Block types (A22NE-PD/A22NE-P)/Screw Terminal Block types (A22E)

    Hole Plug

    Round A22Z-3530

    A22NE-PD / A22NE-P / A22E Dimensions 57

    30-dia. Resin Attachment

    A22Z-A30

    A22NE-PD / A22NE-P / A22E Dimensions 58

    Legend Plates for Emergency Stop

    A22Z-3476-1 (90 dia.)

    A22NE-PD / A22NE-P / A22E Dimensions 59

    A22Z-3466-1 (60 dia.)

    A22NE-PD / A22NE-P / A22E Dimensions 60

    A22Z-3466-2 (60 dia.)

    A22NE-PD / A22NE-P / A22E Dimensions 61

    Lock Ring

    A22Z-3360

    A22NE-PD / A22NE-P / A22E Dimensions 63

    Material: Nickel plated on iron

    25-dia. Ring

    A22Z-R25

    A22NE-PD / A22NE-P / A22E Dimensions 65

    Material: NBR (black)

    Tightening Tool

    A22Z-3905

    A22NE-PD / A22NE-P / A22E Dimensions 66

    Rubber Packing

    A22Z-R

    A22NE-PD / A22NE-P / A22E Dimensions 67

    Connector

    A22Z-3500

    A22NE-PD / A22NE-P / A22E Dimensions 68

    Common E-stop Shrouds

    A22Z-EG1, A22Z-EG1-W, A22Z-EG10, A22Z-EG10-W

    A22NE-PD / A22NE-P / A22E Dimensions 69

    Please click image to enlarge (open in a new window).

    E-stop Shrouds

    A22Z-EG2, A22Z-EG21, A22Z-EG22

    A22NE-PD / A22NE-P / A22E Dimensions 70

    Please click image to enlarge (open in a new window).

    E-stop Shroud

    A22Z-EG3

    A22NE-PD / A22NE-P / A22E Dimensions 71

    Please click image to enlarge (open in a new window).

    MODEL

    STTChi tiếtTiêu đềTải xuống
    1DANH SÁCH MODELA22NE-PD/ A22NE-P/ A22EItem list of A22NE-PD/ A22NE-P/ A22E

    TÀI LIỆU

    STTChi tiếtTiêu đềTải xuống
    1TÀI LIỆUA22NE-PD/ A22NE-P/ A22E

    Đánh giá

    Chưa có đánh giá nào.

    Hãy là người đầu tiên nhận xét “Công tắc dừng khẩn cấp Omron A22NE-PD”

    SẢN PHẨM LIÊN QUAN

    Bộ truyền thông cảm biến bộ khuếch đại sợi quang E3X-DRT21-S VER.3

    Liên hệ

    Bộ khuếch đại sợi quang Omron E3NX-FA

    Liên hệ

    Bộ mã hóa vòng quay Omron E6D-C

    Liên hệ

    Cảm biến sợi quang Omron E32-T11NF

    Liên hệ

    Bộ nguồn Omron S8JC-Z05048C

    Liên hệ

    Cảm biến quang điện Omron E3AS

    Liên hệ

    Bộ khuếch đại sợi quang Omron E3NX-CA

    Liên hệ

    Bộ khuếch đại sợi quang Omron E3X-ZV

    Liên hệ
    xem thêm
    Liên hệ nhanh