Công tắc hành trình Omron D4C

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: CÔNG TẮC HÀNH TRÌNH, CÔNG TẮC OMRON, OMRON Từ khóa: cảm biến áp suất, cảm biến lưu lượng, cảm biến omron, cảm biến omron giá rẻ, cảm biến tiệm cận, cảm biến tiếp xúc, cảm biến vi quang

Công tắc kín, nhỏ gọn và thân mỏng mang đến sự lựa chọn của nhiều bộ truyền động

• Được phê duyệt bởi EN, UL, CSA và CCC (tiêu chuẩn Trung Quốc). (Hãy hỏi đại diện OMRON của bạn để biết thông tin về các kiểu máy đã được phê duyệt.)

• Các đặc tính bịt kín đáp ứng mức độ bảo vệ theo tiêu chuẩn IEC IP67.

• Kết cấu ba lớp kín:
Phần pít-tông được làm kín thông qua vòng đệm và màng ngăn bằng cao su nitrile; phần công tắc bịt kín bằng nắp cao su nitrile; lối vào cáp bịt kín thông qua vật liệu đóng gói.

• Chiều dài cáp 3 và 5 m có sẵn trên các mẫu tiêu chuẩn. Các mẫu cũng có sẵn với cáp được chứng nhận UL và CSA.

• Có thể gắn nhiều loại với Công tắc có Pit tông.

• Các mẫu có đèn LED chỉ báo màu đỏ được thêm vào sê-ri để dễ dàng xác nhận hoạt động. (Đặt mặc định là sáng khi không hoạt động.)

• Cáp chịu dầu VCTF có đánh dấu CE. (Chỉ áp dụng cho các mẫu tiêu chuẩn.)

Đặc điểm

Switches

Standard Switches with No Operation Indicator

Actuator	Ratings		Standard load			Microload
	Ratings		5 A at 250 VAC, 4 A at 30 VDC			0.1 A at 125 VAC, 0.1 A at 30 VDC
	Cable		VCTF oil- resistant cable *1	VCTF cable *2	SJT(O) cable *3	VCTF oil- resistant cable *1	VCTF cable *2
	Cable length (m)		Model
Pin plunger		3	D4C-1201	D4C-1401	D4C-1601	D4C-4201	D4C-4401
Pin plunger		5	D4C-1301	D4C-1501	D4C-1701	D4C-4301	D4C-4501
Roller plunger		3	D4C-1202	D4C-1402	D4C-1602	D4C-4202	D4C-4402
Roller plunger		5	D4C-1302	D4C-1502	D4C-1702	D4C-4302	D4C-4502
Crossroller plunger		3	D4C-1203	D4C-1403	D4C-1603	D4C-4203	D4C-4403
Crossroller plunger		5	D4C-1303	D4C-1503	D4C-1703	D4C-4303	D4C-4503
Roller lever		3	D4C-1220	D4C-1420	D4C-1620	D4C-4220	D4C-4420
Roller lever		5	D4C-1320	D4C-1520	D4C-1720	D4C-4320	D4C-4520
Roller lever, high-sensitivity		3	D4C-1224	D4C-1424	D4C-1624	D4C-4224	D4C-4424
Roller lever, high-sensitivity		5	D4C-1324	D4C-1524	D4C-1724	D4C-4324	D4C-4524
Sealed pin plunger		3	D4C-1231	D4C-1431	D4C-1631	D4C-4231	D4C-4431
Sealed pin plunger		5	D4C-1331	D4C-1531	D4C-1731	D4C-4331	D4C-4531
Sealed roller plunger		3	D4C-1232	D4C-1432	D4C-1632	D4C-4232	D4C-4432
Sealed roller plunger		5	D4C-1332	D4C-1532	D4C-1732	D4C-4332	D4C-4532
Sealed crossroller plunger		3	D4C-1233	D4C-1433	D4C-1633	D4C-4233	D4C-4433
Sealed crossroller plunger		5	D4C-1333	D4C-1533	D4C-1733	D4C-4333	D4C-4533
Plastic rod		3	D4C-1250	D4C-1450	D4C-1650	D4C-4250	D4C-4450
Plastic rod		5	D4C-1350	D4C-1550	D4C-1750	D4C-4350	D4C-4550
Center roller lever		3	D4C-1260	D4C-1460	D4C-1660	D4C-4260	D4C-4460
Center roller lever		5	D4C-1360	D4C-1560	—	D4C-4360	D4C-4560

Note: 1. Models are available separately with resistance to viscous oils (oil drain holes are provided), but only with
Plunger Models. Add “-M” to the model number (example: D4C-1202 would be D4C-1202-M). Ask your nearest
OMRON representative for details.
2. Switches with variable roller levers are also available. Ask your nearest OMRON representative for details.
*1. Oil-resistant vinyl cabtire cables; approved by EN and IEC.
*2. Ordinary vinyl cabtire cables.
*3. Switches with SJT(O) Cables (cables approved by UL and CSA) are approved by UL and CSA.

Standard Switches with Operation Indicator (Red)

Actuator	Ratings		5 A at 125 VAC		4 A at 30 VDC
	Cable		VCTF oil-resistant cable *1	VCTF cable *2	VCTF oil-resistant cable *1	VCTF cable *2
	Cable length (m)		Model
Pin plunger		3	D4C-2201	D4C-2401	D4C-3201	D4C-3401
Pin plunger		5	D4C-2301	D4C-2501	D4C-3301	D4C-3501
Roller plunger		3	D4C-2202	D4C-2402	D4C-3202	D4C-3402
Roller plunger		5	D4C-2302	D4C-2502	D4C-3302	D4C-3502
Crossroller plunger		3	D4C-2203	D4C-2403	D4C-3203	D4C-3403
Crossroller plunger		5	D4C-2303	D4C-2503	D4C-3303	D4C-3503
Roller lever		3	D4C-2220	D4C-2420	D4C-3220	D4C-3420
Roller lever		5	D4C-2320	D4C-2520	D4C-3320	D4C-3520
Roller lever, high-sensitivity		3	D4C-2224	D4C-2424	D4C-3224	D4C-3424
Roller lever, high-sensitivity		5	D4C-2324	D4C-2524	D4C-3324	D4C-3524
Sealed pin plunger		3	D4C-2231	D4C-2431	D4C-3231	D4C-3431
Sealed pin plunger		5	D4C-2331	D4C-2531	D4C-3331	D4C-3531
Sealed roller plunger		3	D4C-2232	D4C-2432	D4C-3232	D4C-3432
Sealed roller plunger		5	D4C-2332	D4C-2532	D4C-3332	D4C-3532
Sealed crossroller plunger		3	D4C-2233	D4C-2433	D4C-3233	D4C-3433
Sealed crossroller plunger		5	D4C-2333	D4C-2533	D4C-3333	D4C-3533
Plastic rod		3	D4C-2250	D4C-2450	D4C-3250	D4C-3450
Plastic rod		5	D4C-2350	D4C-2550	D4C-3350	D4C-3550
Center roller lever		3	D4C-2260	D4C-2460	D4C-3260	D4C-3460
Center roller lever		5	D4C-2360	D4C-2560	D4C-3360	D4C-3560

Note: Ask your nearest OMRON representative for information on Switching with approved international standards.
*1. Oil-resistant vinyl cabtire cables; approved by EN and IEC.
*2. Ordinary vinyl cabtire cables.

Standard Switches with Operation Indicator

Actuator	Ratings	0.1 A at 125 VAC	0.1 A at 30 VDC
	Cable	VCTF oil-resistant cable *	VCTF oil-resistant cable *
	Cable length (m)	Model
Pin plunger	3	D4C-5201	D4C-6201
Pin plunger	5	—	D4C-6301
Roller plunger	3	D4C-5202	D4C-6202
Roller plunger	5	D4C-5302	D4C-6302
Crossroller plunger	3	D4C-5203	D4C-6203
Crossroller plunger	5	D4C-5303	D4C-6303
Roller lever	3	D4C-5220	D4C-6220
Roller lever	5	D4C-5320	D4C-6320
Roller lever, high-sensitivity	3	D4C-5224	D4C-6224
Roller lever, high-sensitivity	5	D4C-5324	D4C-6324
Sealed pin plunger	3	—	D4C-6231
Sealed pin plunger	5	—	D4C-6331
Sealed roller plunger	3	D4C-5232	D4C-6232
Sealed roller plunger	5	D4C-5332	D4C-6332
Sealed crossroller plunger	3	—	D4C-6233
Sealed crossroller plunger	5	—	D4C-6333
Plastic rod	3	D4C-5250	D4C-6250
Plastic rod	5	D4C-5350	D4C-6350

Note: Ask your nearest OMRON representative for information on Switching with approved international standards.
* Oil-resistant vinyl cabtire cables; approved by EN and IEC.

Pre-wired Models (Use VCTF Oil-resistant Cable)

Actuator	Ratings	1 A at 125 VAC		1 A at 30 VDC
	Operation indicator	Without operation indicator	With operation indicator	Without operation indicator	With operation indicator
	Cable length (m)	Model
Pin plunger	0.3	—	—	—	D4C-3001-DK1EJ03
Roller plunger	0.3	—	D4C-2002-AK1EJ03	D4C-1002-DK1EJ03	D4C-3002-DK1EJ03
Sealed roller plunger	0.3	—	—	D4C-1032-DK1EJ03	D4C-3032-DK1EJ03
Roller lever (high-sensitivity model)	0.3	—	D4C-2024-AK1EJ03	—	D4C-3024-DK1EJ03

Note: 1. M1J models are also available. Contact your OMRON sales representative for further information.
2. Of the above model numbers, some with special specifications are not registered.

Weather-resistant Models

Actuator	Operation indicator		Without operating indication		With operating indication
	Ratings		Standard load	Microload	Standard load
			5 A at 250 VAC 4 A at 30 VDC	0.1 A at 125 VAC 0.1 A at 30 VDC	5 A at 125 VAC	4 A at 30 VDC
			VCTF oil-resistant cable *
	Cable length (m)		Model
Roller lever		3	D4C-1220-P	D4C-4220-P	D4C-2220-P	D4C-3220-P
Roller lever		5	D4C-1320-P	—	—	—
Roller lever (high-sensitivity model)		3	D4C-1224-P	D4C-4224-P	D4C-2224-P	D4C-3224-P
Roller lever (high-sensitivity model)		5	D4C-1324-P	D4C-4324-P	D4C-2324-P	D4C-3324-P
Adjustable roller lever		3	D4C-1227-P	D4C-4227-P	D4C-2227-P	D4C-3227-P
Adjustable roller lever		5	D4C-1327-P	D4C-4327-P	D4C-2327-P	D4C-3327-P
Adjustable rod lever		3	D4C-1229-P	D4C-4229-P	—	D4C-3229-P
Adjustable rod lever		5	D4C-1329-P	—	D4C-2329-P	D4C-3329-P

* Vinyl cabtire cable with excellent oil resistance.
Note: Silicon rubber is used to increase resistance to the environment. Silicon rubber, however, can generate silicon gas.
(This can occur at room temperature, but the amount of silicon gas generated increases at higher temperatures.)
Silicon gas will react as a result of arc energy and form silicon oxide (SiO₂). If silicon oxide accumulates on the
contacts, contact interference can occur and can interfere with the device. Before using a Switch, test it under actual
application conditions (including the environment and operating frequency) to confirm that no problems will occur in
actual.

Applicable Cables

Type			For AC	For DC
Appearance	No. of conductors	Cable length	Model	Model
Straight	4	2 m	XS2F-A421-D90-F	XS2F-D421-D80-F
Straight	4	5 m	XS2F-A421-G90-F	XS2F-D421-G80-F

Mounting Plates (Order Separately)

The WL/WL-N model incorporated by equipment can be replaced with the D4C together with the Mounting Plate without changing the position of the dog or cam.

List of Replaceable Models

WL/WL-N model (Actuator)	D4C model (Actuator)	Plate
WLD/WL01D/WLD18-N (Top plunger)	D4C-[][]01 (Plunger)	D4C-P001
WLD2/WL01D2/WLD28-N (Top roller plunger)	D4C-[][]02 (Roller plunger)	D4C-P002
WLCA2/WL01CA2/WLCA2-N (Roller lever)	D4C-[][]20 (Roller lever)	D4C-P020

Note: The WL01[] is for micro loads.

Example of Replacement

Note: The position of the dog remains unchanged.

Individual Parts

Head/Actuator

Actuator	Head (with actuator)	Actuator
Pin plunger	D4C-0001	—
Roller plunger	D4C-0002	—
Crossroller plunger	D4C-0003	—
Roller lever	D4C-0020	WL-1A100
Roller lever (weather-resistant model)	—	WL-1A100P1
Roller lever (high-sensitivity model)	D4C-0024	WL-1A100
Variable roller lever	D4C-0027	—
Variable rod lever	D4C-0029	HL-1HPA500
Sealed pin plunger	D4C-0031	—
Sealed roller plunger	D4C-0032	—
Sealed crossroller plunger	D4C-0033	—
Plastic rod	D4C-0050	—
Center roller lever	D4C-0060	—

Note: 1. The model numbers for heads are of the form D4C-00[][], with the numbers in the squares indicating the type of
actuator.
2. Actuators for plunger models, plastic rod models, and center roller lever models cannot be ordered individually.
They must be ordered together with the head.

Thông số kỹ thuật

Approved Standards

Agency	Standard	File No.
TÜV Product Service	EN60947-5-1	*1, 3
UL	UL508	E76675 *2
CSA	CSA C22.2 No.14	LR45746 *2
CCC(CQC)	GB/T14048.5	*3

*1. Excluding weather-resistant models, only models with VCTF oil-resistant cables and pre-wired models are certified.
(Contact your OMRON representative for the model numbers.)
Models with VCTF oil-resistant cables and pre-wired models (125 VAC) are certified for CE Marking.
*2. SJT(O)-cable models only.
(Applicable only to models listed on Lineup.)
*3. Ask your OMRON representative for information on approved models.

Ratings

Standard Model

Rated voltage	Non-inductive load (A)				Inductive load (A)
	Resistive load		Lamp load		Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC 250 VAC	5 (0.1) 5		1.5 1	0.7 0.5	3 2		2.5 1.5	1.3 0.8
8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	5 (0.1) 5 (0.1) 4 (0.1) 0.4 0.2		2 2 2 0.05 0.03		5 4 3	4 4 3	3 3 3 0.05 0.03
8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	5 (0.1) 5 (0.1) 4 (0.1) 0.4 0.2		2 2 2 0.05 0.03		0.4 0.2		3 3 3 0.05 0.03

Inrush current	NC	20 A max.
Inrush current	NO	10 A max.

Note: 1. The values given on the top are steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp loads have an inrush current of 10 times the steady-state current.
4. Motor loads have an inrush current of 6 times the steady-state current.
5. The values “0.1” given in parentheses are for micro load models.

Pre-wired Model

Rated voltage	Non-inductive load (A)				Inductive load (A)
	Resistive load		Lamp load		Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC	1	1	1	0.7	1	1	1	1
30 VDC	1	1	1	1	1	1	1	1

Approved Standard Ratings

TÜV (EN60947-5-1), CCC (GB/T14048.5)

Model	Applicable category and ratings	I the
D4C-1[][][]	AC-15 2 A/250 V DC-12 2 A/30 V	5 A 4 A
D4C-2[][][]	AC-15 2 A/125 V	5 A
D4C-3[][][]	DC-12 2 A/30 V	4 A
D4C-4[][][]	AC-14 0.1 A/125 V DC-12 0.1 A/30 V	0.5 A 0.5 A
D4C-5[][][]	AC-14 0.1 A/125 V	0.5 A
D4C-6[][][]	DC-12 0.1 A/30 V	0.5 A

UL/CSA

B300 (D4C-16[][], -17[][])
B150 (D4C-26[][], -27[][])
B300

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
120 VAC 240 VAC	5 A	30 15	3 1.5	3,600 3,600	360 360

B150

Rated voltage	Carry current	Current (A)		Volt-amperes (VA)
Rated voltage	Carry current	Make	Break	Make	Break
120 VAC	5 A	30	3	3,600	360

Characteristics

Degree of protection		IP67
*Durability 1**	*Mechanical 3**	10,000,000 operations min.
*Durability 1**	*Electrical 2**	200,000 operations min. (5 A at 125 VAC, resistive load)
Operating speed		0.1 mm/s to 0.5 m/s (in case of plunger) 1 mm/s to 1 m/s (in case of roller lever)
Operating frequency	Mechanical	120 operations/min
Operating frequency	Electrical	30 operations/min
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance (initial)		250 mΩ max. (initial value with 2-m VCTF cable) 300 mΩ max. (initial value with 3-m VCTF cable) 400 mΩ max. (initial value with 5-m VCTF cable)
Dielectric strength	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
	Between current-carrying metal part and ground	1,500 VAC, 50/60 Hz for 1 min Uimp: 2.5 kV (EN60947-5-1)
	Between each terminal and non- current-carrying metal part	1,500 VAC, 50/60 Hz for 1 min Uimp: 2.5 kV(EN60947-5-1)
Rated insulation voltage (Ui)		300 V (EN60947-5-1) *5
Pollution degree (operating environment)		3 (EN60947-5-1)
Short-circuit protective device (SCPD)		10 A fuse type gI or gG (IEC60269)
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (I the)		5 A, 4 A, 0.5 A (EN60947-5-1)
Protection against electric shock		Class I (with grounding wire) *6
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude *4
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	500 m/s² max. *4
Ambient operating temperature		-10°C to +70°C (with no icing)
Ambient operating humidity		35% to 95%RH
Weight (D4C-1202)		With 3-m VCTF cable: 360 g With 5-m VCTF cable: 540 g

Note: The above figures are initial values.
*1. The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.
Contact your OMRON sales representative for more detailed information on other operating environments.
*2. Pre-wired Models: 1,000,000 operations min. (DC specifications, switching current: 0.1 A)
*3. Outdoor specifications: 500,000 operations min.
*4. Excluding Plastic Rods.
*5. Pre-wired models: 250 V
*6. Pre-wired models: class III

Kích thước

(Unit: mm)

Switches

Models without LED indicators are shown in the illustrations and dimensions diagrams. Refer to below for Models with LED Indicators.
The boxes in the model numbers are replaced with the rating and cable type. Refer to Data Sheet for the Model Number Structure.