Liên hệ
• Các mẫu đòn bẩy con lăn trung tâm mới cho phép gắn tối đa 6 Công tắc theo nhóm.
• Đầu nối cáp để thay thế Switch dễ dàng.
• Kết cấu ba lớp để cung cấp mức độ bảo vệ theo tiêu chuẩn IEC IP67.
• Có đèn báo hoạt động để dễ theo dõi (đèn báo tiêu chuẩn sáng khi Công tắc không hoạt động).
• Được phê duyệt bởi UL và CSA.
| Ratings | 1 A at 125 VAC | 1 A at 30 VDC | |||
|---|---|---|---|---|---|
| LED indicator | Without indicator | With indicator | Without indicator | With indicator | |
| Actuator | Model | Model | Model | Model | |
| Pin plunger |  | D4CC-1001 | D4CC-2001 | D4CC-3001 | D4CC-4001 |
| Roller plunger |  | D4CC-1002 | D4CC-2002 | D4CC-3002 | D4CC-4002 |
| Crossroller plunger |  | D4CC-1003 | D4CC-2003 | D4CC-3003 | D4CC-4003 |
| High-sensitivity roller lever |  | D4CC-1024 | D4CC-2024 | D4CC-3024 | D4CC-4024 |
| Sealed pin plunger |  | D4CC-1031 | D4CC-2031 | D4CC-3031 | D4CC-4031 |
| Sealed roller plunger |  | D4CC-1032 | D4CC-2032 | D4CC-3032 | D4CC-4032 |
| Sealed crossroller plunger |  | D4CC-1033 | — | D4CC-3033 | D4CC-4033 |
| Plastic rod |  | D4CC-1050 | D4CC-2050 | D4CC-3050 | D4CC-4050 |
| Center roller lever |  | D4CC-1060 | D4CC-2060 | D4CC-3060 | D4CC-4060 |
| Type | For AC | For DC | ||
|---|---|---|---|---|
| Appearance | No. of conductors | Cable length | Model | Model |
Straight | 4 | 1 m | XS2F-A421-C90-F | XS2F-D421-C80-F |
| 2 m | XS2F-A421-D90-F | XS2F-D421-D80-F | ||
| 5 m | XS2F-A421-G90-F | XS2F-D421-G80-F | ||
| 10 m | XS2F-A421-J90-F | XS2F-D421-J80-F | ||
It is possible to replace an WL/WL-N Limit Switch with a D4CC Limit Switch mounted on this plate without changing the position of the dog or cam.
| WL/WL-N model (Actuator) | D4CC model (Actuator) | Plate |
|---|---|---|
| WLD WLD18-N (Top plunger) | D4CC- [] 001 (Plunger) | D4C-P001 |
| WLD2 WLD28-N (Top roller plunger) | D4CC- [] 002 (Roller plunger) | D4C-P002 |
| WLCA2 WLCA2-N (Roller lever) | D4CC- [] 024 (Roller lever) | D4C-P020 |
Note: The position of the dog remains unchanged.
| Rated voltage | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125 VAC | 1 | 1 | 1 | 0.7 | 1 | 1 | 1 | 1 |
| 30 VDC | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| Inrush current | NC | 5 A max. |
|---|---|---|
| NO | 2.5 A max. |
| Degree of protection | IP67 | |
|---|---|---|
| Durability *1 | Mechanical | 10,000,000 operations min. |
| Electrical | 200,000 operations min. (1 A at 125 VAC, resistive load) | |
| Operating speed | 0.1 mm/s to 0.5 m/s (in case of plunger) 1 mm/s to 1 m/s (in case of roller lever) | |
| Operating frequency | Mechanical | 120 operations/min |
| Electrical | 30 operations/min | |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact resistance (initial) | 100 mΩ max. | |
| Dielectric strength | Between terminals of same polarity | 1,000 VAC, 50/60 Hz for 1 min |
| Between current-carrying metal parts and ground | 1,500 VAC, 50/60 Hz for 1 min | |
| Between each termi-nal and non- current-carrying metal part | 1,500 VAC, 50/60 Hz for 1 min | |
| Vibration resistance | Malfunction | 10 to 55 Hz, 1.5-mm double amplitude *2 |
| Shock resistance | Destruction | 1,000 m/s2 max. |
| Malfunction | 500 m/s2 max. *2 | |
| Ambient operating temperature | -10°C to +70°C (with no icing) | |
| Ambient operating humidity | 35% to 95%RH | |
| Weight | Approx. 120 g (in the case of D4CC-1002) | |
The leakage current and resistance of Switches with indicators are as follows:
| Item Model | D4CC-2[][][] | D4CC-4[][][] |
|---|---|---|
| Voltage | 125 VAC | 30 VDC |
| Leakage current | 1.0 mA | 1.0 mA |
| Resistive value | 150 k Ω | 30 k Ω |
(Unit: mm)
The [] in each model number is replaced with the code expressing the rated load of the model. Refer to Model Number Legend.
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Select one of the specified Connector Plugs from the following table.
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
There is no difference in mounting pitch between the Mounting Plate and the WL/WL-N. The mounting depth of the D4CC with the Mounting Plate attached is, however, shorter than that of the panel-mounted WL/WL-N.
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | D4CC | Item list of D4CC |
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | D4CC |  |
Đánh giá
Chưa có đánh giá nào.