Liên hệ
Sê-ri WL cung cấp đầy đủ các Công tắc giới hạn với lịch sử lâu dài đáp ứng nhu cầu của người dùng. Chọn các thông số kỹ thuật chịu được môi trường, bộ truyền động cho bất kỳ phôi nào về cơ bản, độ nhạy vận hành phù hợp với phôi, chỉ báo vận hành để hỗ trợ vận hành và bảo trì cũng như các thông số kỹ thuật đi dây khác nhau.
Sê-ri bao gồm Công tắc kín khí, Công tắc kín, Công tắc chịu nhiệt, Công tắc nhiệt độ thấp, Công tắc chống ăn mòn và Công tắc chống thời tiết. Chọn một trong những yêu cầu của môi trường tại chỗ.
Thép không gỉ và nhựa chống lại sự bám dính của các mảnh vụn được sử dụng để ngăn ngừa các rắc rối do bột kẽm tạo ra trong quá trình hàn.
Tuổi thọ cao đã đạt được bằng cách tăng khả năng chống ma sát và tạo ra các đặc tính trượt tốt hơn trong cơ chế đầu. Khả năng hiển thị lớn hơn được cung cấp khi cài đặt với màn hình huỳnh quang để cài đặt hành trình.
Cấu trúc hai cực, ngắt đôi đảm bảo phanh mạch.
Vòng chữ O, đệm kín và các biện pháp khác cung cấp cấu trúc chống nước, chống nhỏ giọt (IP67).
Nhiều công tắc WL/WLM khác nhau được UL, CSA, TÜV, EN/IEC và CCC chấp thuận khiến chúng trở nên lý tưởng cho các máy xuất khẩu.
Xác nhận hoạt động bằng đèn neon hoặc đèn LED để xác nhận và bảo trì khởi động dễ dàng hơn.
* Các chỉ báo hoạt động được cung cấp trên các công tắc được trang bị đèn báo, Công tắc cơ bản chống bắn tóe và Công tắc cơ bản có tuổi thọ cao.
Giảm hệ thống dây điện với kết nối một chạm. Cũng có sẵn các mẫu có đầu nối đi dây trực tiếp và đi dây sẵn giúp việc thay thế Công tắc dễ dàng hơn.
Note: Models are also available with ground terminals.
| Actuator | Roller lever R38 |  | Roller lever R50 |  | Roller lever R63 |  | ||
|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | |||||
| Basic | Standard load | WLCA2 | WLCA2-7 | WLCA2-8 | ||||
| Microload | WL01CA2 | WL01CA2-7 | WL01CA2-8 | |||||
| Overtravel | General- purpose | Standard load | WLH2 | – | – | |||
| Microload | WL01H2 | – | – | |||||
| 90° operation | Standard load | WLCA2-2 | – | – | ||||
| Microload | WL01CA2-2 | – | – | |||||
| Standard load | WLCA2-2N | – | – | |||||
| Microload | WL01CA2-2N | – | – | |||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actuator | Adjustable roller lever |  | Adjustable rod lever 25 to 140mm |  | Adjustable rod lever 350 to 380mm |  | Rod spring lever |  | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | Model | ||||||
| Basic | Standard load | WLCA12 | WLCL | – | – | |||||
| Microload | WL01CA12 | WL01CL | – | – | ||||||
| Overtravel | General- purpose | Standard load | WLH12 | WLHL | WLHAL4 | WLHAL5 | ||||
| Microload | WL01H12 | WL01HL | – | – | ||||||
| 90° operation | Standard load | WLCA12-2 | WLCL-2 | – | – | |||||
| Microload | WL01CA12-2 | – | – | – | ||||||
| Standard load | WLCA12-2N | WLCL-2N | – | – | ||||||
| Microload | WL01CA12-2N | WL01CL-2N | – | – | ||||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actuator | Fork lever lock (with WL-5A100 plastic roller lever) |  | Fork lever lock (with WL-5A102 plastic roller lever) |  | Fork lever lock (with WL-5A104 plastic roller lever) |  | Fork lever lock (with WL-5A104 plastic roller lever) |  | |
|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | Model | |||||
| Maintained | Standard load | WLCA32-41 | WLCA32-42 | WLCA32-43 | WLCA32-44 | ||||
| Microload | WL01CA32-41 | – | WL01CA32-43 | WL01CA32-44 | |||||
| Actuator | Top plunger |  | Top-roller plunger |  | Top-ball plunger |  | Sealed top-roller plunger |  | |
|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | Model | |||||
| Top plunger | Standard load | WLD | WLD2 | WLD3 | WLD28 | ||||
| Microload | WL01D | WL01D2 | WL01D3 | WL01D28 | |||||
| Actuator | Horizontal plunger |  | Horizontal-roller plunger |  | Horizontal-ball plunger |  | |
|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | ||||
| Side plunger | Standard load | WLSD | WLSD2 | WLSD3 | |||
| Microload | WL01SD | WL01SD2 | WL01SD3 | ||||
| Actuator | Coil spring (spring diameter: 6.5) |  | Coil spring (spring diameter: 4.8) |  | Coil spring (resin rod diameter: 8) |  | Steel wire (wire diameter: 1) |  | |
|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | Model | |||||
| Flexible rod | Standard load | WLNJ | WLNJ-30 | WLNJ-2 | WLNJ-S2 | ||||
| Microload | WL01NJ | WL01NJ-30 | WL01NJ-2 | WL01NJ-S2 | |||||
| Actuator | Roller lever R38 | | Roller lever R50 | | Roller lever R63 | | Adjustable roller lever | | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | Model | ||||||
| Basic | Neon lamp | WLCA2-LE | WLCA2-7LE | WLCA2-8LE | WLCA12-LE | |||||
| LED | WLCA2-LD | WLCA2-7LD | WLCA2-8LD | WLCA12-LD | ||||||
| Overtravel | General- purpose | Neon lamp | WLH2-LE | – | – | WLH12-LE | ||||
| LED | WLH2-LD | – | – | WLH12-LD | ||||||
| 90° operation | Neon lamp | WLCA2-2LE | – | – | WLCA12-2LE | |||||
| LED | WLCA2-2LD | – | – | WLCA12-2LD | ||||||
| Neon lamp | WLCA2-2NLE | – | – | WLCA12-2NLE | ||||||
| LED | WLCA2-2NLD | – | – | WLCA12-2NLD | ||||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actuator | Adjustable rod lever 25 to 140 mm | | Adjustable rod lever 350 to 380 mm | | Rod spring lever | | ||
|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | |||||
| Basic | Neon lamp | WLCL-LE | – | – | ||||
| LED | WLCL-LD | – | – | |||||
| Overtravel | General- purpose | Neon lamp | WLHL-LE | WLHAL4-LE | WLHAL5-LE | |||
| LED | WLHL-LD | WLHAL4-LD | WLHAL5-LD | |||||
| 90° operation | Neon lamp | WLCL-2LE | – | – | ||||
| LED | WLCL-2LD | – | – | |||||
| Neon lamp | WLCL-2NLE | – | – | |||||
| LED | WLCL-2NLD | – | – | |||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actuator | Fork lever lock (with WL-5A100 Plastic Roller Lever) | | Fork lever lock (with WL-5A102 Plastic Roller Lever) | | Fork lever lock (with WL-5A104 Plastic Roller Lever) | | |
|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | ||||
| Maintained | Neon lamp | WLCA32-41L E | WLCA32-42LE | WLCA32-43LE | |||
| LED | WLCA32-41LD | – | WLCA32-43LD | ||||
| Actuator | Top plunger | | Top-roller plunger | | Top-ball plunger | | Sealed top-roller plunger | | |
|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | Model | |||||
| Top plunger | Neon lamp | WLD-LE | WLD2-LE | WLD3-LE | WLD28-LE | ||||
| LED | WLD-LD | WLD2-LD | WLD3-LD | WLD28-LD | |||||
| Actuator | Horizontal plunger | | Horizontal-roller plunger | | Horizontal-ball plunger | | |
|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | ||||
| Side plunger | Neon lamp | WLSD-LE | WLSD2-LE | WLSD3-LE | |||
| LED | WLSD-LD | WLSD2-LD | WLSD3-LD | ||||
| Actuator | Coil spring (spring diameter: 6.5) | | Coil spring (spring diameter: 4.8) | | Coil spring (resin rod diameter: 8) | | Steel wire (wire diameter: 1) | | |
|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | Model | |||||
| Flexible rod | Neon lamp | WLNJ-LE | WLNJ-30LE | WLNJ-2LE | WLNJ-S2LE | ||||
| LED | WLNJ-LD | WLNJ-30LD | WLNJ-2LD | WLNJ-S2LD | |||||
| Actuator | Item | Basic | Overtravel | ||||
|---|---|---|---|---|---|---|---|
| General-purpose | |||||||
| Wiring | Built-in switch specification | Model | Model | ||||
Roller lever | 2-conductor | DC | NO | connector pins No. 3, 4 | Standard | WLCA2-LDK13 | WLH2-LDK13 |
| Airtight seal | WLCA2-55LDK13 | WLH2-55LDK13 | |||||
| 4-conductor | DC | Standard | WLCA2-LDK43 | WLH2-LDK43 | |||
| Airtight seal | WLCA2-55LDK43 | WLH2-55LDK43 | |||||
| Top-roller plunger  | 2-conductor | DC | NO | connector pins No. 3, 4 | Standard | WLD2-LDK13 | – |
| Airtight seal | WLD2-55LDK13 | – | |||||
| 4-conductor | DC | Standard | WLD2-LDK43 | – | |||
| Airtight seal | WLD2-55LDK43 | – | |||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actu- ator | Item | Basic | Overtravel | ||||
|---|---|---|---|---|---|---|---|
| General-purpose | |||||||
| Wiring | Built-in switch specification | Model | Model | ||||
| Roller lever | 2- conductor | DC | NO | connector pins No. 3, 4 | Standard | WLCA2-LD-M1J | WLH2-LD-M1J |
| Airtight seal | WLCA2-55LD-M1J | – | |||||
| connector pins No. 1, 4 | Standard | WLCA2-LD-M1GJ | WLH2-LD-M1GJ | ||||
| Airtight seal | WLCA2-55LD-M1GJ | – | |||||
| NC | connector pins No. 3, 2 | Standard | – | – | |||
| Airtight seal | WLCA2-55LD-M1JB | – | |||||
| 4- conductor | DC | Standard | WLCA2-LD-DGJ03 | WLH2-LD-DGJ03 | |||
| Airtight seal | WLCA2-55LD-DGJ03 | – | |||||
| 3- conductor | DC | connector pins No. 2, 3, 4 | Standard | WLCA2-LD-DK1EJ03 | – | ||
| Airtight seal | WLCA2-55LD-DK1EJ03 | – | |||||
| Top- roller plunger | 2- conductor | DC | NO | connector pins No. 3, 4 | Standard | WLD2-LD-M1J | – |
| Airtight seal | WLD2-55LD-M1J | – | |||||
| connector pins No. 1, 4 | Standard | WLD2-LD-M1GJ | – | ||||
| Airtight seal | WLD2-55LD-M1GJ | – | |||||
| NC | connector pins No. 3, 2 | Standard | – | – | |||
| Airtight seal | WLD2-55LD-M1JB | – | |||||
| 4- conductor | DC | Standard | WLD2-LD-DGJ03 | – | |||
| Airtight seal | – | – | |||||
| 3- conductor | DC | connector pins No. 2, 3, 4 | Standard | WLD2-LD-DK1EJ03 | – | ||
| Airtight seal | WLD2-55LD-DK1EJ03 | – | |||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
Note: Models are also available with ground terminals.
| Actuator | Roller lever R38 | |||||
|---|---|---|---|---|---|---|
| Item | Basic | Overtravel | ||||
| General-purpose | ||||||
| Model | Model | |||||
| Airtight seal | No indicator | WLCA2-55 | WLH2-55 | |||
| Indicator | LED | WLCA2-55LD | WLH2-55LD | |||
| Neon | WLCA2-55LE | WLH2-55LE | ||||
| Hermetic seal | Molded terminals | -139 | No indicator | WLCA2-139 | WLH2-139 | |
| Indicator | NC wiring | WLCA2-139LD2 | – | |||
| NO wiring | WLCA2-139LD3 | – | ||||
| -140 | No indicator | WLCA2-140 | WLH2-140 | |||
| Indicator | NC wiring | WLCA2-140LD2 | – | |||
| NO wiring | WLCA2-140LD3 | – | ||||
| -141 | No indicator | WLCA2-141 | WLH2-141 | |||
| Indicator | NC wiring | WLCA2-141LD2 | – | |||
| NO wiring | WLCA2-141LD3 | WLH2-141LD3 | ||||
| Anti-coolant | No indicator | WLCA2-RP60 | WLH2-RP60 | |||
| Indicator | NC wiring | WLCA2-RP60LD2 | – | |||
| NO wiring | WLCA2-RP60LD3 | WLH2-RP60LD3 | ||||
| Heat-resistant | No indicator | WLCA2-TH | WLH2-TH | |||
| Low-temperature | WLCA2-TC | WLH2-TC | ||||
| Corrosion-proof | WLCA2-RP | WLH2-RP | ||||
| Weather-proof | WLCA2-P1 | WLH2-P1 | ||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actuator | Roller lever R38 | |||||
|---|---|---|---|---|---|---|
| Item | Overtravel | |||||
| 90° (-2 model) | 90° (-2N model) | |||||
| Model | Model | |||||
| Airtight seal | No indicator | WLCA2-255 | WLCA2-2N55 | |||
| Indicator | LED | WLCA2-255LD | WLCA2-2N55LD | |||
| Neon | WLCA2-255LE | WLCA2-2N55LE | ||||
| Hermetic seal | Molded terminals | -139 | No indicator | WLCA2-2139 | WLCA2-2N139 | |
| Indicator | NC wiring | WLCA2-2139LD2 | – | |||
| NO wiring | WLCA2-2139LD3 | – | ||||
| -140 | No indicator | – | WLCA2-2N140 | |||
| Indicator | NC wiring | – | – | |||
| NO wiring | – | – | ||||
| -141 | No indicator | – | – | |||
| Indicator | NC wiring | – | – | |||
| NO wiring | – | – | ||||
| Anti-coolant | No indicator | WLCA2-2RP60 | – | |||
| Indicator | NC wiring | WLCA2-2RP60LD2 | – | |||
| NO wiring | WLCA2-2RP60LD3 | – | ||||
| Heat-resistant | No indicator | WLCA2-2TH | WLCA2-2NTH | |||
| Low-temperature | WLCA2-2TC | WLCA2-2NTC | ||||
| Corrosion-proof | – | – | ||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actuator | Adjustable roller lever | |||||
|---|---|---|---|---|---|---|
| Item | Basic | Overtravel | ||||
| General-purpose | ||||||
| Model | Model | |||||
| Airtight seal | No indicator | WLCA12-55 | – | |||
| Indicator | LED | WLCA12-55LD | – | |||
| Neon | WLCA12-55LE | – | ||||
| Hermetic seal | Molded terminals | -139 | No indicator | WLCA12-139 | – | |
| -140 | WLCA12-140 | – | ||||
| -141 | WLCA12-141 | – | ||||
| Anti-coolant | WLCA12-RP60 | – | ||||
| Heat-resistant | No indicator | WLCA12-TH | WLH12-TH | |||
| Low-temperature | WLCA12-TC | WLH12-TC | ||||
| Corrosion-proof | WLCA12-RP | WLH12-RP | ||||
| Weather-proof | WLCA12-P1 | WLH12-P1 | ||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actuator | Adjustable roller lever | ||
|---|---|---|---|
| Item | Overtravel | ||
| 90° (-2 model) | 90° (-2N model) | ||
| Model | Model | ||
| Heat-resistant | No indicator | WLCA12-2TH | WLCA12-2NTH |
| Low-temperature | WLCA12-2TC | WLCA12-2NTC | |
| Actuator | Adjustable rod lever 25 to 140 mm | |||||
|---|---|---|---|---|---|---|
| Item | Basic | Overtravel | ||||
| General-purpose | ||||||
| Model | Model | |||||
| Airtight seal | No indicator | WLCL-55 | – | |||
| Indicator | LED | WLCL-55LD | – | |||
| Neon | – | – | ||||
| Hermetic seal | Molded terminals | -139 | No indicator | WLCL-139 | – | |
| -140 | WLCL-140 | – | ||||
| -141 | – | – | ||||
| Anti-coolant | WLCL-RP60 | – | ||||
| Heat-resistant | No indicator | WLCL-TH | WLHL-TH | |||
| Low-temperature | WLCL-TC | WLHL-TC | ||||
| Corrosion-proof | WLCL-RP | WLHL-RP | ||||
| Weather-proof | WLCL-P1 | WLHL-P1 | ||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Actuator | Adjustable rod lever 25 to 140 mm | ||
|---|---|---|---|
| Item | Overtravel | ||
| 90° (-2 model) | 90° (-2N model) | ||
| Model | Model | ||
| Heat-resistant | No indicator | WLCL-2TH | WLCL-2NTH |
| Low-temperature | WLCL-2TC | WLCL-2NTC | |
| Corrosion-proof | WLCL-2RP | – | |
| Actuator | Top-roller plunger | | Sealed top-roller plunger | | Horizontal plunger | | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | |||||||
| Airtight seal | No indicator | WLD2-55 | WLD28-55 | WLSD-55 | ||||||
| Indicator | LED | WLD2-55LD | WLD28-55LD | WLSD-55LD | ||||||
| Neon | WLD2-55LE | WLD28-55LE | – | |||||||
| Hermetic seal | Molded terminals | -139 | No indicator | WLD2-139 | WLD28-139 | WLSD-139 | ||||
| -140 | – | WLD28-140 | – | |||||||
| Anti-coolant | WLD2-RP60 | WLD28-RP60 | WLSD-RP60 | |||||||
| Heat-resistant | No indicator | WLD2-TH | WLD28-TH | WLSD-TH | ||||||
| Low-temperature | WLD2-TC | – | WLSD-TC | |||||||
| Corrosion-proof | WLD2-RP | WLD28-RP | WLSD-RP | |||||||
Note: The standard cable length for models with airtight seals is 5 m.
| Actuator | Horizontal-roller plunger | | Coil spring (spring diameter: 6.5) | | Coil spring (resin rod diameter: 8) | | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Item | Model | Model | Model | |||||||
| Airtight seal | No indicator | WLSD2-55 | WLNJ-55 | WLNJ-255 | ||||||
| Indicator | LED | WLSD2-55LD | WLNJ-55LD | WLNJ-255LD | ||||||
| Neon | – | – | – | |||||||
| Hermetic seal | Molded terminals | -139 | No indicator | WLSD2-139 | WLNJ-139 | – | ||||
| -140 | WLSD2-140 | WLNJ-140 | WLNJ-2140 | |||||||
| Anti-coolant | WLSD2-RP60 | WLNJ-RP60 | WLNJ-2RP60 | |||||||
| Heat-resistant | No indicator | WLSD2-TH | WLNJ-TH | – | ||||||
| Low-temperature | WLSD2-TC | WLNJ-TC | WLNJ-2TC | |||||||
| Corrosion-proof | WLSD2-RP | WLNJ-RP | WLNJ-2RP | |||||||
Note: The standard cable length for models with airtight seals is 5 m.
| Actuator | Roller lever | Sealed top-roller plunger  | |||||
|---|---|---|---|---|---|---|---|
| Item | Double nut lever |  | Allen-head lever |  | |||
| Model | Model | Model | |||||
| Neon lamp operation indicator | Basic | WLCA2-LEAS | WLCA2-LES | WLD28-LES | |||
| Overtravel | General-purpose | WLH2-LEAS | WLH2-LES | – | |||
| LED operation indicator | Basic | WLCA2-LDAS | WLCA2-LDS | WLD28-LDS | |||
| Overtravel | General-purpose | WLH2-LDAS | WLH2-LDS | – | |||
| Item | LED operation indicator *1 | ||||
|---|---|---|---|---|---|
| Basic | Overtravel | ||||
| General-purpose | |||||
| Actuator | Model | Model | |||
 | Roller lever, screw terminal | WLMCA2-LD | WLMH2-LD | ||
 | Roller lever, direct-wired connector | 2-conductor | AC | WLMCA2-LDK13A | WLMH2-LDK13A |
| DC | WLMCA2-LDK13 | WLMH2-LDK13 | |||
| 4-conductor | AC | WLMCA2-LDK43A | WLMH2-LDK43A | ||
| DC | WLMCA2-LDK43 | WLMH2-LDK43 | |||
 | Roller lever, pre-wired connector *2 | 2-conductor | DC | WLMCA2-LD-M1J | WLMH2-LD-M1J |
| 4-conductor | DC | WLMCA2-LD-DGJ03 | WLMH2-LD-DGJ03 | ||
| Voltage specification | Number of conductors | Cable length | Model |
|---|---|---|---|
| AC | 2 | 2 m | XS2F-A421-DB0-F |
| 5 m | XS2F-A421-GB0-F | ||
| 4 | 2 m | XS2F-A421-D90-F | |
| 5 m | XS2F-A421-G90-F | ||
| DC | 2 | 2 m | XS2F-D421-DD0 |
| 5 m | XS2F-D421-GD0 | ||
| 4 | 2 m | XS2F-D421-D80-F | |
| 5 m | XS2F-D421-G80-F |
| Actuator type | Set model | Head model (with Actuator) | |
|---|---|---|---|
| Roller lever |  | WLCA2 | WL-1H1100 |
| WLH2 | WL-2H1100-1 * | ||
| WLCA2-2 | WL-3H1100 | ||
| WLCA2-2N | WL-6H1100 | ||
| Adjustable roller lever |  | WLCA12 | WL-1H2100 |
| WLH12 | WL-2H2100-1 * | ||
| WLCA12-2 | WL-3H2100 | ||
| WLCA12-2N | WL-6H2100 | ||
| Adjustable rod lever |  | WLCL | WL-4H4100 |
| WLCL-2 | WL-3H4100 | ||
| WLCL-2N | WL-6H4100 | ||
| Top plunger |  | WLD | WL-7H100 |
| WLD2 | WL-7H200 | ||
| WLD3 | WL-7H300 | ||
| WLD28 | WL-7H400 | ||
| Horizontal plunger |  | WLSD | WL-8H100 |
| WLSD2 | WL-8H200 | ||
| WLSD3 | WL-8H300 | ||
| Fork lever lock |  | WLCA32-41 | WL-5H5100 |
| WLCA32-42 | WL-5H5102 | ||
| WLCA32-43 | WL-5H5104 | ||
| WLCA32-44 | WL-5H5104 | ||
| Coil spring |  | WLNJ | WL-9H100 |
| WLNJ-30 | WL-9H200 | ||
| WLNJ-2 | WL-9H300 | ||
| WLNJ-S2 | WL-9H400 | ||
| Actuator type | Switches without levers | ||
|---|---|---|---|
| Model | |||
| Switches for roller levers | | Basic R38 | WLRCA2 |
| General-purpose overtravel, 80° | WLRH2 | ||
| Overtravel, 90° operation | WLRCA2-2 | ||
| Overtravel, 90° operation | WLRCA2-2N | ||
| Switches for adjustable roller levers | | Basic | WLRCA2 |
| General-purpose overtravel, 80° | WLRH2 | ||
| Overtravel, 90° operation | WLRCA2-2 | ||
| Overtravel, 90° operation | WLRCA2-2N | ||
| Switches for adjustable rod lever | | Basic, 25 to 140 mm | WLRCL |
| Overtravel, 90° operation, 25 to 140 mm | WLRCA2-2 | ||
| Overtravel, 90° operation, 25 to 140 mm | WLRCA2-2N | ||
| Switches for top plungers | | – | – |
| Switches for horizontal plungers | | – | – |
| Switches for fork lever locks | | Maintained, WL-5A100 Maintained, WL-5A102 Maintained, WL-5A104 | WLRCA32 |
| Switches for coil springs | | – | – |
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
| Cover | Cover only with indicator |  |
|---|---|---|
| Item | Model | |
| Neon lamp | WL-LE | |
| LED | WL-LD | |
| Head (with actuator) | Lever | Cover with indicator | Switches without Levers | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Complete Heads with allen-head levers |  | Double Nut Lever |  | Allen- head Lever |  | Double Nut Lever |  | Cover with Indicator |  | Switches without levers |  |
| Model | Model | Model | Model | Model | Model | ||||||
| WL-1H1100S (for WLCA2-[]) | WL-2H1100S (for WLH2-[]) | WL-1A103S Roller lever | WL-1A105S Roller Lever | Neon lamp WL-LES | WLRCA2-LDS | ||||||
| WLRH2-LES WLRH2-LDS | |||||||||||
| LED (LED) WL-LDS | |||||||||||
Note: For details of The WL high-sensitivity, high-precision models, refer to Limit Switch WL-N/WL Datasheet (Cat. No. C151-E1).
Heads can be replaced within the same model group. They cannot be replaced between different model groups.
| Group No. | Set model number | Head model number (with Actuator) |
|---|---|---|
| 1 | WLCA2 | WL-1H1100 |
| WLCA2-7 | WL-1H1200 | |
| WLCA2-8 | WL-1H1300 | |
| WLCA12 | WL-1H2100 | |
| 2 | WLCL | WL-4H4100 * |
| 3 | WLH2 | WL-2H1100-1 |
| WLH12 | WL-2H2100-1 | |
| WLHL | WL-2H4100 | |
| WLHAL4 | WL-2H4106 | |
| WLHAL5 | WL-2H4107 | |
| 4 | WLCA2-2N | WL-6H1100 |
| WLCA12-2N | WL-6H2100 | |
| WLCL-2N | WL-6H4100 | |
| 5 | WLCA2-2 | WL-3H1100 |
| WLCA12-2 | WL-3H2100 | |
| WLCL-2 | WL-3H4100 | |
| 6 | WLCA32-41 | WL-5H5100 |
| WLCA32-42 | WL-5H5102 | |
| WLCA32-43 | WL-5H5104 | |
| WLCA32-44 | WL-5H5104 | |
| 7 | WLD | WL-7H100 |
| WLD2 | WL-7H200 | |
| WLD3 | WL-7H300 | |
| 8 | WLD28 | WL-7H400 * |
| 9 | WLSD | WL-8H100 |
| WLSD2 | WL-8H200 | |
| WLSD3 | WL-8H300 | |
| 10 | WLNJ | WL-9H100 |
| WLNJ-30 | WL-9H200 | |
| 11 | WLNJ-2 | WL-9H300 * |
| 12 | WLNJ-S2 | WL-9H400 * |
* This Heads are special and must be used. Do not use any other Head.
| Agency | Standard | File No. | Approved models |
|---|---|---|---|
| UL | UL508 | E76675 | Contact your OMRON representative for information on approved models. |
| CSA | CSA C22.2 No.14 | LR45746 | |
| TÜV Rheinland | EN60947-5-1 | J50022353, J9950023, J9950959 | |
| CCC (CQC) | GB/T14048.5 | Contact your OMRON representative for details. |
| Item | Rated voltage (V) | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | ||||||
| NC | NO | NC | NO | NC | NO | NC | NO | ||
| Basic models, overtravel models | 125 VAC 250 VAC 500 VAC | 10 10 10 | 3 2 1.5 | 1.5 1 0.8 | 10 10 3 | 5 3 1.5 | 2.5 1.5 0.8 | ||
| 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC | 10 10 6 0.8 0.4 | 6 6 4 0.2 0.1 | 3 3 3 0.2 0.1 | 10 10 6 0.8 0.4 | 6 6 4 0.2 0.1 | ||||
| Inrush current | NC | 30 A max. |
|---|---|---|
| NO | 20 A max. |
| Minimum applicable load | 5 VDC 160 mA |
|---|
| Rated voltage (V) | Rated current (A) – Resistive load |
|---|---|
| AC 125 | 0.1 |
| DC 30 |
Operation in the following ranges will produce optimum performance.
| Recommended load range | 5 to 30 VDC 0.5 to 100 mA |
|---|
| Recommended load range | 5 VDC 1 mA |
|---|
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 120 VAC 240 VAC 480 VAC 600 VAC | 10 A | 60 30 15 12 | 6 3 1.5 1.2 | 7,200 | 720 |
0.1 A 125 VAC, 0.1 A 30 VDC
| Model | Application category and ratings | Thermal current (Ithe) | Indicator |
|---|---|---|---|
| WL[] | AC-15: 2 A/250 V DC-12: 2 A/48 V | 10 A | — |
| WL01[] | AC-14: 0.1 A/125V DC-12: 0.1 A/48 V | 0.5 A | — |
| WL[]-LE | AC-15: 2 A/250 V | 10 A | Neon lamp |
| WL01[]-LE | AC-14: 0.1 A/125 V | 0.5 A | Neon lamp |
| WL[]-LD | AC-15: 2 A/115 V DC-12: 2 A/48 V | 10 A | LED |
| WL01[]-LD | AC-14: 0.1 A/115 V DC-12: 0.1 A/48 V | 0.5 A | LED |
Note: As an example, AC-15: 2 A/250 V means the following:
| Application category | AC-15 |
|---|---|
| Rated operating current (Ie) | 2A |
| Rated operating voltage (Ue) | 250V |
| Item | Max. rated voltage (V) | Leakage current (mA) | |
|---|---|---|---|
| WL-LE | Neon lamp | 125 AC | Approx. 0.6 |
| 250 AC | Approx. 1.9 | ||
| WL-LD | LED | 115 AC/DC | Approx. 0.5 |
| 10 to 24 AC/DC | Approx. 0.4 | ||
| Degree of protection | IP67 | |
|---|---|---|
| Durability *1 | Mechanical | 15,000,000 operations min. *2 |
| Electrical | 750,000 operations min. *3 | |
| Operating speed | 1 mm/s to 1 m/s (in case of WLCA2) | |
| Operating frequency | Mechanical | 120 operations/minute min. |
| Electrical | 30 operations/minute min. | |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact resistance | 25 mΩ max. (initial value for the built-in switch when tested alone) *6 | |
| Dielectric strength | Between terminals of the same polarity | 1,000 VAC, 50/60 Hz for 1 min |
| Between current-carrying metal part and ground | 2,200 VAC, 50/60 Hz for 1 min/Uimp 2.5 kV | |
| Between each terminal and non- current-carrying metal part | 2,200 VAC, 50/60 Hz for 1 min/Uimp 2.5 kV | |
| Rated insulation voltage (Ui) | 250 V (EN60947-5-1) | |
| Pollution degree (operating environment) | 3 (EN60947-5-1) | |
| Short-circuit protective device (SCPD) | 10 A, fuse type gG or gI (IEC60269) | |
| Conditional short-circuit current | 100 A (EN60947-5-1) | |
| Conventional enclosed thermal current (Ithe) | 10 A, 0.5 A (EN60947-5-1) | |
| Protection against electric shock | Class I | |
| Vibration resistance | Malfunction | 10 to 55 Hz, 1.5-mm double amplitude *4 |
| Shock resistance | Destruction | 1,000 m/s2 max. |
| Malfunction | 300 m/s2 max. *4 | |
| Ambient operating temperature | -10°C to +80°C (with no icing) *5 | |
| Ambient operating humidity | 35% to 95% RH | |
| Weight | Approx. 275 g (in case of WLCA2) | |
| Item | Rated voltage (V) | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | ||||||
| NC | NO | NC | NO | NC | NO | NC | NO | ||
| WL[]-LES | 125 VAC 250 VAC | 10 10 | 3 2 | 1.5 1 | 10 10 | 5 5 | 2.5 1.5 | ||
| WL[]-LDS | 115 VAC | 10 | 3 | 1.5 | 10 | 5 | 2.5 | ||
| 12 VDC 24 VDC 48 VDC | 10 6 3 | 6 4 2 | 3 3 1.5 | 10 6 3 | 6 4 2 | ||||
| Inrush current | NC | 30 A max. |
|---|---|---|
| NO | 20 A max. | |
| Operating temperature | -10°C to +80°C (with no icing) | |
| Operating humidity | 35% to 95%RH max. | |
| Rated voltage | Carry current | Current (A) | Volt-amperes (VA) | ||
|---|---|---|---|---|---|
| Make | Break | Make | Break | ||
| 120 VAC 240 VAC | 10 A | 60 30 | 6 3 | 7,200 | 720 |
| Rated voltage | Carry current |
|---|---|
| 115 VAC | 10 A |
| 115 VDC | 0.8 A |
| Model | Application category and ratings |
|---|---|
| WL[] | AC-15: 2 A/250 V DC-12: 2 A/48 V |
| WL01[] | AC-14: 0.1 A/125V DC-12: 0.1 A/48 V |
| WL[]-LE | AC-15: 2 A/250 V |
| WL01[]-LE | AC-14: 0.1 A/125 V |
| WL[]-LD | AC-15: 2 A/115 V DC-12: 2 A/48 V |
| WL01[]-LD | AC-14: 0.1 A/115 V DC-12: 0.1 A/48 V |
Note: As an example, AC-15: 2 A/250 V means the following:
| Application category | AC-15 |
|---|---|
| Rated operating current (Ie) | 2 A |
| Rated operating voltage (Ue) | 250 V |
| Degree of protection | IP67 | |
|---|---|---|
| Durability *1 | Mechanical | 15,000,000 operations min. *2 |
| Electrical | 750,000 operations min. *3 | |
| Operating speed | 1 mm/s to 1 m/s (in case of WLCA2) | |
| Operating frequency | Mechanical | 120 operations/minute min. |
| Electrical | 30 operations/minute min. | |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact resistance | 25 mΩ max. (initial value for the built-in switch when tested alone) | |
| Dielectric strength | Between terminals of the same polarity | 1,000 VAC, 50/60 Hz for 1 min |
| Between current-carrying metal part and ground | 2,200 VAC, 50/60 Hz for 1 min/Uimp 2.5 kV | |
| Between each terminal and non- current-carrying metal part | 2,200 VAC, 50/60 Hz for 1 min/Uimp 2.5 kV | |
| Rated insulation voltage (Ui) | 250 V (EN60947-5-1) | |
| Pollution degree (operating environment) | 3 (EN60947-5-1) | |
| Short-circuit protective device (SCPD) | 10 A, fuse type gG or gI (IEC60269) | |
| Conditional short-circuit current | 100 A (EN60947-5-1) | |
| Conventional enclosed thermal current (Ithe) | 10 A, 0.5 A (EN60947-5-1) | |
| Protection against electric shock | Class I | |
| Vibration resistance | Malfunction | 10 to 55 Hz, 1.5-mm double amplitude |
| Shock resistance | Destruction | 1,000 m/s2 max. |
| Malfunction | 300 m/s2 max. | |
| Ambient operating temperature | -10°C to +80°C (with no icing) | |
| Ambient operating humidity | 35% to 95%RH | |
| Weight | Approx. 275 g (in case of WLCA2) | |
| Item | Rated voltage (V) | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | ||||||
| NC | NO | NC | NO | NC | NO | NC | NO | ||
| Basic models, overtravel models | 115 AC | 10 | 3 | 1.5 | 10 | 5 | 2.5 | ||
| 12 DC 24 DC 48 DC 115 DC | 10 6 3 0.8 | 6 4 2 0.2 | 3 3 1.5 0.2 | 10 6 3 0.8 | 6 4 2 0.2 | ||||
| Inrush current | NC | 30 A max. |
|---|---|---|
| NO | 20 A max. |
| Model | Rated voltage (V) | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | ||||||
| NC | NO | NC | NO | NC | NO | NC | NO | ||
| DC | 12 DC | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| 24 DC | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | |
| 48 DC | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | |
| 115 DC | 0.8 | 0.8 | 0.2 | 0.2 | 0.8 | 0.8 | 0.2 | 0.2 | |
| AC | 115 AC | 3 | 3 | 3 | 1.5 | 3 | 3 | 3 | 2.5 |
| Degree of protection | IP67 | |
|---|---|---|
| Durability * | Mechanical | 30,000,000 operations min. |
| Electrical | 30,000,000 operations min. (10 mA at 24 VDC, resistive load) 750,000 operations min. (10 A at 115 VAC, resistive load) | |
| Operating speed | 1 mm/s to 1 m/s (in case of WLCA2) | |
| Operating frequency | Mechanical | 120 operations/minute |
| Electrical | 30 operations/minute | |
| Rated frequency | 50/60 Hz | |
| Insulation resistance | 100 MΩ min. (at 500 VDC) | |
| Contact resistance | 25 mΩ max. (initial value for the built-in switch when tested alone) | |
| Dielectric strength (50/60 Hz for 1 min) | Between terminals of the same polarity | 1,000 VAC (except connector models) |
| Between current-carrying metal part and ground | 2,200 VAC (1,500 V) | |
| Between each terminal and non-current- carrying metal part | 2,200 VAC (1,500 V) | |
| Vibration resistance | Malfunction | 10 to 55 Hz, 1.5-mm double amplitude |
| Shock resistance | Destruction | 1,000 m/s2 max. |
| Malfunction | 300 m/s2 max. | |
| Ambient operating temperature | -10°C to +80°C (with no icing) | |
| Ambient operating humidity | 35% to 95%RH | |
| Weight | Approx. 275 g (in case of WLCA2) | |
(Unit: mm)
For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
For all models WL[] indicates a standard-load model and WL01[] indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Refer to Data Sheet for the connecting cable.
WL[] are Standard Models and WL01[] are Microload Models.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
* External dimensions are the same even for different core wires.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
WL-1A100
Standard Lever
WL-1A115
Resin Roller
WL-1A400
Bearing Roller
WL-1A118
Nylon Roller:
Roller Width: 30 mm
WL-1A105
Double Nuts
WL-1A103S
Spatter Prevention
WL-1A200
Lever Length: 50
Roller Width: 15
WL-1A300
Lever Length: 63
WL-2A100
WL-2A111
Resin Roller
WL-2A107
Double Nuts
WL-2A108
Resin Roller
WL-2A122
WL-2A106
WL-2A130
WL-2A104
WL-2A110
WL-2A105
WL-1A106
WL-1A110
WL-4A100
WL-4A201
WL-3A100
WL-3A106
Double Nut
WL-3A108
WL-3A200
WL-3A203
WL-4A112
WL-2A129
WL-5A101
WL-5A100 has a plastic roller
WL-5A103
WL-5A102 has a plastic roller
WL-5A105
WL-5A104 has a plastic roller
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | WL | Item list of HL-5000 |
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | WL |  |
Đánh giá
Chưa có đánh giá nào.