Công tắc hành trình Omron ZC-D55-MR VCT 1M

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: CẢM BIẾN AN TOÀN, OMRON, THIẾT BỊ AN TOÀN Từ khóa: cảm biến áp suất, cảm biến omron, cảm biến omron giá rẻ, đèn báo, đèn báo omron, giá rẻ, nút nhấn, nút nhấn omron

• Công tắc nhỏ, độ chính xác cao kèm theo với công tắc cơ bản tích hợp cho độ lặp lại cao và độ bền tối thiểu 10 triệu lần hoạt động.

• Cùng bước lắp đặt như Z Basic Switch.

• Cần ít lực vận hành hơn so với công tắc giới hạn thông thường.

• Dòng sản phẩm bao gồm các chế độ có đèn báo hoạt động để dễ dàng bảo trì và kiểm tra.

• Được phê duyệt bởi EN, UL, CSA và CCC (tiêu chuẩn Trung Quốc). (Hãy hỏi đại diện OMRON của bạn để biết Thông tin về các kiểu máy đã được phê duyệt.)

Đặc điểm

Model Number Legend

Ordering Information

Actuator	Model	Approved Standards
Actuator	Model	UL	CSA	EN
Plunger	ZC-D55	●	●	●
Panel mount plunger	ZC-Q55	●	●	●
Panel mount roller plunger	ZC-Q2255	●	●	●
Panel mount crossroller plunger	ZC-Q2155	●	●	●
Sealed roller plunger	ZC-N2255	●	●	●
Sealed crossroller plunger	ZC-N2155	●	●	●
Short hinge lever	ZC-W55	●	●	●
Hinge lever	ZC-W155	●	●	●
Short hinge roller lever	ZC-W255	●	●	●
Hinge roller lever	ZC-W2155	●	●	●
One-way action short hinge roller lever	ZC-W355	●	●	●
One-way action hinge roller lever	ZC-W3155	●	●	●

Note: 1. Use molded terminal models when using the Switch under one of the following conditions: a) dusty, b) high
amount of dripping oil, or c) high humidity. Refer to Molded Terminal Model for the details.
2. Models are available with lead outlets in three positions: right-hand, left-hand, and underside.

Molded Terminal Model

Use of the molded terminal model is recommended in locations subject to excessive dust, oil drips, or moisture. The molded terminal model will have the same dimensions and operating characteristics as the basic model in each. Not approved by UL, CSA or EN.

Actuator	Location of lead output	Left-hand	Right-hand	Underside
Actuator	Length	Left-hand	Right-hand	Underside
Plunger	1 M	ZC-D55-ML VCT 1M	ZC-D55-MR VCT 1M	ZC-D55-MD VCT 1M
Plunger	3 M	ZC-D55-ML VCT 3M	ZC-D55-MR VCT 3M	ZC-D55-MD VCT 3M
Panel mount plunger	1 M	ZC-Q55-ML VCT 1M	ZC-Q55-MR VCT 1M	ZC-Q55-MD VCT 1M
Panel mount plunger	3 M	ZC-Q55-ML VCT 3M	ZC-Q55-MR VCT 3M	–
Panel mount roller plunger	1 M	ZC-Q2255-ML VCT 1M	ZC-Q2255-MR VCT 1M	ZC-Q2255-MD VCT 1M
Panel mount roller plunger	3 M	ZC-Q2255-ML VCT 3M	ZC-Q2255-MR VCT 3M	ZC-Q2255-MD VCT 3M
Panel mount crossroller plunger	1 M	ZC-Q2155-ML VCT 1M	ZC-Q2155-MR VCT 1M	ZC-Q2155-MD VCT 1M
Panel mount crossroller plunger	3 M	–	ZC-Q2155-MR VCT 3M	ZC-Q2155-MD VCT 3M
Sealed roller plunger	1 M	ZC-N2255-ML VCT 1M	ZC-N2255-MR VCT 1M	ZC-N2255-MD VCT 1M
Sealed roller plunger	3 M	ZC-N2255-ML VCT 3M	ZC-N2255-MR VCT 3M	ZC-N2255-MD VCT 3M
Sealed crossroller plunger	1 M	ZC-N2155-ML VCT 1M	ZC-N2155-MR VCT 1M	ZC-N2155-MD VCT 1M
Sealed crossroller plunger	3 M	ZC-N2155-ML VCT 3M	ZC-N2155-MR VCT 3M	–
Short hinge lever	1 M	–	ZC-W55-MR VCT 1M	–
Hinge lever	1 M	ZC-W155-ML VCT 1M	ZC-W155-MR VCT 1M	ZC-W155-MD VCT 1M
Short hinge roller lever	1 M	ZC-W255-ML VCT 1M	ZC-W255-MR VCT 1M	ZC-W255-MD VCT 1M
Hinge roller lever	1 M	ZC-W2155-ML VCT 1M	ZC-W2155-MR VCT 1M	ZC-W2155-MD VCT 1M
One-way action short hinge roller lever	1 M	–	ZC-W355-MR VCT 1M	–

Location of lead output

Right-hand	MR
Left-hand	ML
Underside	MD

Lead Supplies

Leads	Nominal cross-sectional area (mm²)	External diameter (mm)	Terminal connections
V.C.T. (vinyl cabtire cable)	1.25	3 conductor: 10.5 dia.	Black: COM White: NO Red: NC

Operation Indicator-equipped Models

Some models can be equipped upon request with a operation indicator to facilitate maintenance and inspection. Because the indicator is incorporated in the Terminal Protective Cover, the dimensions of the Limit Switch are not affected. In this model, the lead wire is to be connected to the screw terminal. (A connecting washer is provided on the tip of the lead wire). The lead wire can be connected to either the NC or NO terminal.
Operating characteristics are the same as the basic model from in each. Not approved by UL, CSA and EN.
* 12/24 VDC products are not subject to EN standards because their voltage is below that subject to CE marking regulations.

Actuator	AC	DC (12VDC) *	DC (24VDC) *
Plunger	ZC-D55-L	–	ZC-D55-L4
Panel mount plunger	ZC-Q55-L	–	ZC-Q55-L4
Panel mount roller plunger	ZC-Q2255-L	ZC-Q2255-L2	ZC-Q2255-L4
Panel mount crossroller plunger	ZC-Q2155-L	–	ZC-Q2155-L4
Sealed roller plunger	ZC-N2255-L	ZC-N2255-L2	ZC-N2255-L4
Sealed crossroller plunger	ZC-N2155-L	ZC-N2155-L2	ZC-N2155-L4
Hinge lever	ZC-W155-L	–	ZC-W155-L4
Short hinge roller lever	ZC-W255-L	–	ZC-W255-L4
Hinge roller lever	ZC-W2155-L	–	ZC-W2155-L4

(For AC)

• The operating voltage range is from 90 to 250 VAC.

• The dimensions are the same as the standard type. The top of the Terminal Protective Cover is transparent to allow checking the operation easily.

(For DC)

• The DC-operated is provided with an LED indicator.

• There is no protective structure.

• Since a rectifier stack is incorporated into the unit to permit reversing the polarity, this type can also operate on AC power source.

• The LED projects from the housing for easy visibility.

Accessories

	MODEL
ZC Terminal Cover	TERMINAL COVER FOR ZC55
ZC Seal Rubber	SC-R40
ZC Rubber Packing	ZC RUBBER PACKING

Note: The Switch is equipped with these 3 items as a standard.

Thông số kỹ thuật

Approved Standards

Agency	Standard	File No.
UL*	UL508	E76675
TÜV Rheinland	EN60947-1, EN60947-5-1	J50041904
CCC(CQC)	GB/T14048.5	Contact your OMRON representative for details.

Note: Ask your OMRON representative for information on approved models.
* UL certified for CSA C22.2 No. 14.

Ratings

Rated voltage	Non-inductive load (A)				Inductive load (A)
	Resistive load		Lamp load		Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC 250 VAC	10 10		3 2.5	1.5 1.25	10 10		5 3	2.5 1.5
8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	10 10 6 0.5 0.25		3 3 3 0.4 0.2	1.5 1.5 1.5 0.4 0.2	6 6 5 0.05 0.03		5 5 5 0.05 0.03	2.5 2.5 2.5 0.05 0.03

Inrush current	NC	30 A max.
Inrush current	NO	15 A max.

Note: 1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The above ratings were tested under the following conditions according.
(1) Ambient temperature:+20±2°C
(2) Ambient humidity: 65±5%RH
(3) Operating frequency:20 operations/min.

Approved Standard Ratings

UL/CSA

A300

Voltage	Carry current	Current (A)		Volt-amperes (VA)
Voltage	Carry current	Make	Break	Make	Break
120 VAC 240 VAC	10A	60 30	6 3	7,200	720

TÜV Rheinland (EN60947-1, EN60947-5-1), CCC (GB/T14048.5)

Applicable category and ratings
AC-12 10 A/250 VAC

Characteristics

Degree of protections		IP67
Durability	Mechanical	10,000,000 operations min.
Durability	Electrical	500,000 operations min.
Operating speed		0.05 mm/s to 0.5 m/s *1
Operating frequency	Mechanical	120 operations/min
Operating frequency	Electrical	20 operations/min
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		15 mΩ max. (initial value for the builtin switch when tested alone)
Dielectric strength	Between non-continuous terminals	1,000 VAC, 50/60 Hz for 1 min
Dielectric strength	Between each terminal and non- current-carrying metal parts	2,000 VAC, 50/60 Hz for 1 min
Rated insulation voltage (Ui)		1,000 VAC
Pollution degree (operating environment)		3 (IEC947-5-1)
Short-circuit protective device		10 A-fuse type gG (IEC 60269)
Protection against electric shock		Class II
Proof tracking index (PTI)		175
Switch category		D (IEC335)
Rated operating current (Ie)		10 A
Rated operating voltage (Ue)		250 VAC
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude *2
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max. (in case of plunger model) 1 2
Ambient operating temperature		-10°C to +80°C (with no icing)
Ambient operating humidity		35% to 95%RH
Weight		Approx. 92 g (in case of ZC-Q22(21)55)

*1. Only for models with plungers. (Contact your OMRON representative for information on other models.)
*2. Less than 1 ms under a free state at the operating limits.

Kích thước

(Unit: mm)

Plunger
ZC-D55

Panel Mount Plunger
ZC-Q55

Panel Mount Roller Plunger
ZC-Q2255

Panel Mount Crossroller Plunger
ZC-Q2155

Sealed Roller Plunger
ZC-N2255

Sealed Crossroller Plunger
ZC-N2155

Short Hinge Roller Lever
ZC-W55

Hinge Lever
ZC-W155

Short Hinge Roller Lever
ZC-W255

Hinge Roller Lever
ZC-W2155

One-way Action Short Hinge Roller Lever
ZC-W355

One-way Action Hinge Roller Lever
ZC-W3155

Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. Operating characteristics are for when the Switch is operated from direction A.

Please click image to enlarge (open in a new window).

MODEL

STT	Chi tiết	Tiêu đề	Tải xuống
1	DANH SÁCH MODEL	ZC	Item list of ZC

TÀI LIỆU

STT	Chi tiết	Tiêu đề	Tải xuống
1	TÀI LIỆU	ZC

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Công tắc hành trình Omron ZC-D55-MR VCT 1M” Hủy

xem thêm

Công tắc hành trình Omron ZC-D55-MR VCT 1M

Liên Hệ Tư Vấn

Đặc điểm

Model Number Legend

Ordering Information

Molded Terminal Model

Location of lead output

Lead Supplies

Operation Indicator-equipped Models

(For AC)

(For DC)

Accessories

Thông số kỹ thuật

Approved Standards

Ratings

Approved Standard Ratings

UL/CSA

A300

TÜV Rheinland (EN60947-1, EN60947-5-1), CCC (GB/T14048.5)

Characteristics

Kích thước

Plunger ZC-D55

Panel Mount Plunger ZC-Q55

Panel Mount Roller Plunger ZC-Q2255

Panel Mount Crossroller Plunger ZC-Q2155

Sealed Roller Plunger ZC-N2255

Sealed Crossroller Plunger ZC-N2155

Short Hinge Roller Lever ZC-W55

Hinge Lever ZC-W155

Short Hinge Roller Lever ZC-W255

Hinge Roller Lever ZC-W2155

One-way Action Short Hinge Roller Lever ZC-W355

One-way Action Hinge Roller Lever ZC-W3155

MODEL

TÀI LIỆU

Đánh giá

Hãy là người đầu tiên nhận xét “Công tắc hành trình Omron ZC-D55-MR VCT 1M” Hủy

SẢN PHẨM LIÊN QUAN

Đăng nhập

Plunger
ZC-D55

Panel Mount Plunger
ZC-Q55

Panel Mount Roller Plunger
ZC-Q2255

Panel Mount Crossroller Plunger
ZC-Q2155

Sealed Roller Plunger
ZC-N2255

Sealed Crossroller Plunger
ZC-N2155

Short Hinge Roller Lever
ZC-W55

Hinge Lever
ZC-W155

Short Hinge Roller Lever
ZC-W255

Hinge Roller Lever
ZC-W2155

One-way Action Short Hinge Roller Lever
ZC-W355

One-way Action Hinge Roller Lever
ZC-W3155