Công tắc hành trình Omron ZE-QA2-2G

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: CÔNG TẮC HÀNH TRÌNH, CÔNG TẮC OMRON, OMRON Từ khóa: cảm biến áp suất, cảm biến lưu lượng, cảm biến omron, cảm biến omron giá rẻ, cảm biến tiệm cận, cảm biến tiếp xúc, cảm biến vi quang

Tuổi thọ dài và sức mạnh phá vỡ lớn

• Công tắc cơ bản đa năng Z được tích hợp trong Công tắc ZE, ZV và ZV2. Họ cung cấp độ bền cao và khả năng phá vỡ cao.

• Công tắc Cơ bản X có lỗ thoát từ tính được tích hợp trong Công tắc XE, XV và XV2. Các mô hình DC cũng đã được thêm vào sê-ri.

• Có ba phương pháp lắp (mặt bên, mặt đế và mặt chéo) và nhiều loại bộ dẫn động.

• Các đầu nối hướng về phía trước khi tháo nắp để kết nối dễ dàng.

• Công tắc có đầu nối đất có dấu CE.

Đặc điểm

Mounting			Side mounting			Base mounting			Diagonal side mounting
Actuator			Model	Approved standards		Model	Approved standards		Model	Approved standards
Actuator			Model	UL	CSA	Model	UL	CSA	Model	UL	CSA
General purpose	Plunger	AC	ZE-Q-2	●	●	ZV-Q-2	●	●	ZV2-Q-2	●	●
	Plunger	DC	XE-Q-2			XV-Q-2			XV2-Q-2
	Roller plunger	AC	ZE-Q22-2	●	●	ZV-Q22-2	●	●	ZV2-Q22-2	●	●
	Roller plunger	DC	XE-Q22-2			XV-Q22-2			XV2-Q22-2
	Crossroller plunger	AC	ZE-Q21-2	●	●	ZV-Q21-2	●	●	ZV2-Q21-2	●	●
	Crossroller plunger	DC	XE-Q21-2			XV-Q21-2			—
	Roller arm lever	AC	ZE-QA2-2	●	●	ZV-QA2-2	●	●	ZV2-QA2-2	●	●
	Roller arm lever	DC	XE-QA2-2			XV-QA2-2			XV2-QA2-2
	One-way action roller arm lever	AC	ZE-QA277-2	●	●	—			ZV2-QA277-2	●	●
	One-way action roller arm lever	DC	XE-QA277-2			—			—
Sealed (Booted)	Sealed plunger	AC	ZE-N-2	●	●	ZV-N-2	●	●	ZV2-N-2	●	●
	Sealed plunger	DC	XE-N-2			XV-N-2			XV2-N-2
	Sealed roller plunger	AC	ZE-N22-2	●	●	ZV-N22-2	●	●	ZV2-N22-2	●	●
	Sealed crossroller plunger	AC	ZE-N21-2	●	●	ZV-N21-2	●	●	ZV2-N21-2	●	●
	Sealed roller arm lever	AC	ZE-NA2-2	●	●	ZV-NA2-2	●	●	ZV2-NA2-2	●	●
	Sealed roller arm lever	DC	XE-NA2-2			XV-NA2-2			XV2-NA2-2
	One-way action sealed roller arm lever	AC	ZE-NA277-2	●	●	ZV-NA277-2	●	●	ZV2-NA277-2	●	●
	One-way action sealed roller arm lever	DC	XE-NA277-2			—			XV2-NA277-2

Note: 1. The diagonal side mounting model feature improved sealing property, improved mounting strength through use
of M5 screws, increased stability in seating with large mounting width (31 x 75 mm) and permit coupling of a
number of Switch units.
2. Ask your OMRON representative for information on models with ground terminals.

Thông số kỹ thuật

Approved Standards

Agency	Standard	File No.
UL	UL508	E76675
CSA	CSA C22.2 No.14	LR45746
CCC (CQC)	GB/T14048.5	Contact your OMRON representative for details.

Note: 1. Models XE, XV, and XV2 are not approved by UL, CSA, and CCC.
2. Ask your OMRON representative for information on approved models.

Ratings

Model	Rated voltage	Non-inductive load (A)				Inductive load (A)
		Resistive load		Lamp load		Inductive load		Motor load
		NC	NO	NC	NO	NC	NO	NC	NO
ZE-[] ZV-[] ZV2-[]	125 VAC 250 VAC 480 VAC	15 15 10		3 2.5 1.5	1.5 1.25 0.75	15 15 6		5 3 1.5	2.5 1.5 0.75
ZE-[] ZV-[] ZV2-[]	125 VDC 250 VDC	0.5 0.25		0.5 0.25		0.05 0.03		0.05 0.03
XE-[] XV-[] XV2-[]	8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	10 10 10 10 3		3 3 3 3 1.5	1.5 1.5 1.5 1.5 0.75	10 10 10 7.5 2	10 10 10 6 1.5	5 5 5 2 2	2.5 2.5 2.5 2.5 1.5

Note: 1. The above figures are for standard currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steadystate current.
4. Motor load has an inrush current of 6 times the steady-state current.

Inrush current	NC	30 A max.
Inrush current	NO	15 A max.

Approved Standard Ratings

UL/CSA

Model	Rated voltage	Current	Horsepower
ZE	125 VAC 250 VAC 480 VAC	15 A 15 A 15 A	1/8HP 1/4HP
ZE	125 VDC 250 VDC	0.5 A 0.25 A	—

CCC (GB/T14048.5)

Applicable category and ratings
AC-12 10 A/250 VAC

Characteristics

Degree of protection		IP65 *1
*Durability 2**	Mechanical	Z[]: 10,000,000 operations min. X[]: 1,000,000 operations min.
*Durability 2**	Electrical	Z[]: 500,000 operations min., for 15 A, 250 VAC resistive load X[]: 100,000 operations min., for 10 A, 125 VDC resistive load
Operating speed		Plunger type: 0.01 mm/s to 0.5 m/s Lever type: 0.02 mm/s to 0.5 m/s
Operating frequency	Mechanical	120 operations/min
Operating frequency	Electrical	20 operations/min
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		15 mΩ max. (initial value)
Terminal temperature rise		50°C max.
Dielectric strength	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
	Between current-carrying metal part and ground	Z[]: 2,000 VAC, 50/60 Hz for 1 min X[]: 1,500 VAC, 50/60 Hz for 1 min
	Between each terminal and non-current-carrying metal part	Z[]: 2,000 VAC, 50/60 Hz for 1 min X[]: 1,500 VAC, 50/60 Hz for 1 min
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude *3
Shock resistance *3	Destruction	1,000m/s² max.
Shock resistance *3	Malfunction	100 m/s² max. 4 50 m/s² max. 5
Ambient operating temperature		-10°C to +80°C (with no icing)
Ambient operating humidity		General-purpose type: 35% to 85%RH Sealed type: 35% to 95%RH
Weight		Approx. 260 to 280 g

Note: The above figures are initial values.
*1. IP65 for []-N models and IP60 for []-Q models.
*2. The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.
Contact your OMRON sales representative for more detailed information on other operating environments.
*3. At the operation limit positions.
*4. Only for plunger, sealed plunger, roller arm lever, and sealed roller arm lever.
*5. Only for crossroller plunger, sealed crossroller plunger, roller plunger, and sealed roller plunger.

Kích thước

(Unit: mm)

Side Mounting Models

Plunger
ZE-Q-2
XE-Q-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 2

Roller Plunger
ZE-Q22-2
XE-Q22-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 3

Crossroller Plunger
ZE-Q21-2
XE-Q21-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 4

Roller Arm Lever
ZE-QA2-2
XE-QA2-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 5

Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The diagrams shown the Switches with two, M4 screws (length: 45) attached. (The screws are provided.)

Please click image to enlarge (open in a new window).

One-way Action Roller Arm Lever
ZE-QA277-2
XE-QA277-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 8

Sealed Plunger
ZE-N-2
XE-N-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 9

Sealed Roller Plunger
ZE-N22-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 10

Sealed Crossroller Plunger
ZE-N21-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 11

Sealed Roller Arm Lever
ZE-NA2-2
XE-NA2-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 12

One-way Action Sealed Roller Arm Lever
ZE-NA277-2
XE-NA277-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 13

Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The diagrams shown the Switches with two, M4 screws (length: 45) attached. (The screws are provided.)

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 15

Base Mounting/Diagonal Side Mounting Models

The diagrams show the base-mounted model (ZV-[] or XV-[]) on top and the diagonal side-mounted model (ZV2-[] or XV2-[]) on bottom.
The flange on base-mounted models is shown with dotted lines.

Plunger
ZV(2)-Q-2
XV(2)-Q-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 17

Roller Plunger
ZV(2)-Q22-2
XV(2)-Q22-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 18

Crossroller Plunger
ZV(2)-Q21-2
XV-Q21-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 19

Roller Arm Lever
ZV(2)-QA2-2
XV(2)-QA2-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 20

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Please click image to enlarge (open in a new window).

Note: 1. OP for ZV2-Q-2 and XV2-Q-2 is 24.2 ±0.8 mm.
2. OP for ZV2-Q22-2 and XV2-Q22-2 is 35.7 ±1 mm.
3. OP for ZV2-Q21-2 is 35.7 ±0.8 mm.

One-way Action Roller Arm Lever
ZV2-QA277-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 23

Sealed Plunger
ZV(2)-N-2
XV(2)-N-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 24

Sealed Roller Plunger
ZV(2)-N22-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 25

Sealed Crossroller Plunger
ZV(2)-N21-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 26

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Please click image to enlarge (open in a new window).

Note: 1. OP for ZV2-N-2 and XV2-N-2 is 31.9 ±0.8 mm.
2. OP for ZV2-N22-2 is 35.7 ±0.8 mm.
3. OP for ZV2-N21-2 is 35.7 ±0.8 mm.

Sealed Roller Arm Lever
ZV(2)-NA2-2
XV(2)-NA2-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 29

One-way Action Sealed Roller Arm Lever
ZV(2)-NA277-2
XV2-NA277-2

ZE / ZV / ZV2 / XE / XV / XV2 Dimensions 30

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

(Unit: mm)

Side Mounting Models

Plunger
ZE-Q-2
XE-Q-2

Roller Plunger
ZE-Q22-2
XE-Q22-2

Crossroller Plunger
ZE-Q21-2
XE-Q21-2

Roller Arm Lever
ZE-QA2-2
XE-QA2-2

Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The diagrams shown the Switches with two, M4 screws (length: 45) attached. (The screws are provided.)

Please click image to enlarge (open in a new window).

One-way Action Roller Arm Lever
ZE-QA277-2
XE-QA277-2

Sealed Plunger
ZE-N-2
XE-N-2

Sealed Roller Plunger
ZE-N22-2

Sealed Crossroller Plunger
ZE-N21-2

Sealed Roller Arm Lever
ZE-NA2-2
XE-NA2-2

One-way Action Sealed Roller Arm Lever
ZE-NA277-2
XE-NA277-2

Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
2. The diagrams shown the Switches with two, M4 screws (length: 45) attached. (The screws are provided.)

Base Mounting/Diagonal Side Mounting Models

The diagrams show the base-mounted model (ZV-[] or XV-[]) on top and the diagonal side-mounted model (ZV2-[] or XV2-[]) on bottom.
The flange on base-mounted models is shown with dotted lines.

Plunger
ZV(2)-Q-2
XV(2)-Q-2

Roller Plunger
ZV(2)-Q22-2
XV(2)-Q22-2

Crossroller Plunger
ZV(2)-Q21-2
XV-Q21-2

Roller Arm Lever
ZV(2)-QA2-2
XV(2)-QA2-2

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Please click image to enlarge (open in a new window).

Note: 1. OP for ZV2-Q-2 and XV2-Q-2 is 24.2 ±0.8 mm.
2. OP for ZV2-Q22-2 and XV2-Q22-2 is 35.7 ±1 mm.
3. OP for ZV2-Q21-2 is 35.7 ±0.8 mm.

One-way Action Roller Arm Lever
ZV2-QA277-2

Sealed Plunger
ZV(2)-N-2
XV(2)-N-2

Sealed Roller Plunger
ZV(2)-N22-2

Sealed Crossroller Plunger
ZV(2)-N21-2

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.