LP3-5AN
LP3-5A3
LP3-5A5
– Cải thiện khả năng hiển thị với màn hình LCD góc nhìn rộng và màn hình trắng
– Đo xung tốc độ cao (50 K㎐)
– Cấp bảo vệ IP66
Model | Code | Content | |||
LP | □- | □ | □ | □ | LCD Multi Pulse Meter |
Dimensions | 3 | 96(W) X 48(H) mm | |||
Display digits | 5 | 5 digits | |||
Power voltage | A | 100 – 240 V a.c. 50/60Hz | |||
Setti ng stages | N | Display only | |||
3 | 3-stage setting (H/GO/L) | ||||
5 | 5-stage setting (HH/H/GO/L/LL) |
Model | LP3-5A5 | LP3-5A3 | LP3-5AN | |
Power voltage | 100 – 240 V a.c. 50/60 Hz | |||
Power consumption | Max. 8 VA | Max. 8 VA | Max. 6 VA | |
Display | Negative LCD display | |||
Character height | Counting unit (14.5 mm), Setting unit (10 mm) | |||
Input frequency | Non-contact (Max. 50 KHz, ON/OFF pulse width Min. 10 us), Contact (Max. 30 Hz ON/OFF pulse width Min. 16.6 ms) | |||
Input | Voltage | [H] level (4.5 – 24 V d.c.), [L] level (0 – 1 V d.c.), Input impedance (4.5 kQ) | ||
Non-voltage | Residual voltage (Max. 1 V), Impedance during short-circuit (Max. 300 Q), Impedance during open (Min. 100 kQ) | |||
Measurement range | F1, F2, F10, F11, F12, F13 : 0.0005 ~ 50 KHz F3, F4, F5, F6 : 0.001 s ~ 3200 s / F7, F8, F9 : 0 ~ 4×109 | |||
Measurement accuracy | F1, F4, F10, F11, F12, F13 : F.S ±0.05 % rdg ±1 digit F2, F3, F5, F6 : F.S ±0.01 % rdg ±1 digit | |||
External power supply | 12 V d.c. ±10 % 100 mA | |||
Display cycle | 0.05 sec / 0.5 sec / 1 sec / 2 sec / 4 sec / 8 sec | |||
Display range | -99999~99999 | |||
Power outage compensation | Approx. 10 years (non-volatile EEPROM only) | |||
Control output | HH(SPST), H(SPST), GO(SPST), L(SPST), LL(SPST) * HH/H output COM common, * LL/L output COM common | H (SPDT), GO (SPST), L (SPDT) | – | |
NO contact (250 V a.c. 5 A resistive load), NC contact (250 V a.c. 2 A resistive load) | ||||
Relay life cycle | Electrical | Min. 100,000 times | ||
Mechanical | Min. 10,000,000 times (250 V a.c. 2A) | |||
Front panel | IP66 (product front) | |||
Vibration durability | 10 – 55Hz double amplitude 0.75 mm X, Y, Z each direction, 2 hr | |||
Insulation resistance | Min. 100 MΩ (500 V d.c.), conductive part terminal – Non-conductive metal | |||
Dielectric strength | 2,000 V a.c. 60 Hz for 1 minute (between each conductive terminal) | |||
Noise immunity | ±2000 V (pulse width l ㎲, square-wave noise by noise simulator is applied among the power terminals) | |||
Ambient temperature | -10 ~ 50 0c (without condensation) | |||
Storage temperature | -20 ~ 60 0c (without condensation) | |||
Ambient humidity | 35 ~ 85 % RH |
Đánh giá
Chưa có đánh giá nào.