Chưa có sản phẩm trong giỏ hàng.
The model numbers used to order sets of Units are illustrated below. One set comprises the Pushbutton, Lamp, and Switch.
For information on combinations, refer to Ordering Information.
Nút nhấn có đèn Omron A3P (Loại siêu sáng)
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Công tắc nút nhấn có đèn thân hình vuông lớn Các mẫu mới được thêm đèn LED siêu sáng.
• Các mẫu mới với đèn LED siêu sáng được thêm vào các mẫu một màn hình.
• Các mẫu cũ không thay đổi. Sắp xếp các mô hình có bảy màu (các mô hình màu đỏ, cam, xanh lá cây và trắng trước đó và các mô hình màu vàng, xanh lam và trắng tinh khiết mới).
• Đã thêm khóa bảo trì phổ biến.
Đặc điểm
Model Number Legend
Ordering Information
Ordering as a Set
The model numbers used to order sets of Units are given in the following tables. One set comprises the Pushbutton, Lamp, and Switch.
(Not all combinations are possible. Ask your OMRON representative for details.)
| Lighting method | Operation | Momentary operation (Self-resetting) | Alternate operation (Self-holding) | ||||
|---|---|---|---|---|---|---|---|
| Contact type | No. of outputs | Pushbutton color symbol | Case color | Black | Light gray | Black | Light gray |
| Standard Loads | SPDT | Bullet Shape LEDs R, O, G, W, Y, A or PW | 12 VAC/DC | A3PJ-90A11-12A(1) | A3PJ-90A12-12A(1) | A3PJ-90B11-12A(1) | A3PJ-90B12-12A(1) |
| 24 VAC/DC | A3PJ-90A11-24A(1) | A3PJ-90A12-24A(1) | A3PJ-90B11-24A(1) | A3PJ-90B12-24A(1) | |||
| DPDT | Bullet Shape LEDs R, O, G, W, Y, A or PW | 12 VAC/DC | A3PJ-90C11-12A(1) | A3PJ-90C12-12A(1) | A3PJ-90D11-12A(1) | A3PJ-90D12-12A(1) | |
| 24 VAC/DC | A3PJ-90C11-24A(1) | A3PJ-90C12-24A(1) | A3PJ-90D11-24A(1) | A3PJ-90D12-24A(1) | |||
| Microloads | SPDT | Bullet Shape LEDs R, O, G, W, Y, A or PW | 12 VAC/DC | A3PJ-90E11-12A(1) | A3PJ-90E12-12A(1) | — | — |
| 24 VAC/DC | A3PJ-90E11-24A(1) | A3PJ-90E12-24A(1) | — | — | |||
| DPDT | Bullet Shape LEDs R, O, G, W, Y, A or PW | 12 VAC/DC | A3PJ-90G11-12A(1) | A3PJ-90G12-12A(1) | — | — | |
| 24 VAC/DC | A3PJ-90G11-24A(1) | A3PJ-90G12-24A(1) | — | — | |||
Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White, (Y) = Yellow, (A) = Blue, (PW) = Pure White.
Ordering as a Set
The model numbers used to order sets of Units are given in the following tables. One set comprises the Pushbutton, Lamp, and Switch.
| Lighting method | Operation | Momentary operation (Self-resetting) | Alternate operation (Self-holding) | ||||
|---|---|---|---|---|---|---|---|
| Contact type | No. of outputs | Pushbutton color symbol | Case color | Black | Light gray | Black | Light gray |
| Standard Loads | SPDT | Bullet Shape LEDs R, O, G, W, Y, A or PW | 12 VAC/DC | A3PA-90A11-12A(1) | A3PA-90A12-12A(1) | A3PA-90B11-12A(1) | A3PA-90B12-12A(1) |
| 24 VAC/DC | A3PA-90A11-24A(1) | A3PA-90A12-24A(1) | A3PA-90B11-24A(1) | A3PA-90B12-24A(1) | |||
| DPDT | Bullet Shape LEDs R, O, G, W, Y, A or PW | 12 VAC/DC | A3PA-90C11-12A(1) | A3PA-90C12-12A(1) | A3PA-90D11-12A(1) | A3PA-90D12-12A(1) | |
| 24 VAC/DC | A3PA-90C11-24A(1) | A3PA-90C12-24A(1) | A3PA-90D11-24A(1) | A3PA-90D12-24A(1) | |||
| Microloads | SPDT | Bullet Shape LEDs R, O, G, W, Y, A or PW | 12 VAC/DC | A3PA-90E11-12A(1) | A3PA-90E12-12A(1) | — | — |
| 24 VAC/DC | A3PA-90E11-24A(1) | A3PA-90E12-24A(1) | — | — | |||
| DPDT | Bullet Shape LEDs R, O, G, W, Y, A or PW | 12 VAC/DC | A3PA-90G11-12A(1) | A3PA-90G12-12A(1) | — | — | |
| 24 VAC/DC | A3PA-90G11-24A(1) | A3PA-90G12-24A(1) | — | — | |||
Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White, (Y) = Yellow, (A) = Blue, (PW) = Pure White.
| Operation | Momentary operation (Self-resetting) | Alternate operation (Self-holding) | Pushbutton color symbol | |||
|---|---|---|---|---|---|---|
| Contact type | No. of outputs | Lighting method | Case color | Light gray | Light gray | |
| Standard Loads | SPDT | LED lamp | 24 VAC/DC | A3PT-90A12-24S(1) | A3PT-90B12-24S(1) | R O G W Y A PW |
| DPDT | 24 VAC/DC | A3PT-90C12-24S(1) | A3PT-90D12-24S(1) | |||
Note: Enter the desired color symbols for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White, (Y) = Yellow, (A) = Blue, (PW) = Pure White.
Accessories and Tools
Accessories, Tools, and the replacement parts (caps only) are the same as those for the A3P. Refer to the A3P datasheet.
Individual colored plates and legend plates are not available.
Thông số kỹ thuật
UL (File No. E41515), CSA (File No. LR45258)
Standard Load:
5 A at 125 VAC
3 A at 250 VAC
Microload:
0.1 A at 125 VAC
0.1 A at 30 VDC
Note: Certification has been obtained for the Switch Unit.
For detailed information on individual products that have received certification, consult your supplier.
5 A at 125 VAC
3 A at 250 VAC
Microload:
0.1 A at 125 VAC
0.1 A at 30 VDC
Note: Certification has been obtained for the Switch Unit.
For detailed information on individual products that have received certification, consult your supplier.
CCC (GB/T14048.5)
Standard Load:
3 A at 250 VAC
4 A at 30 VAC
Microload:
0.1 A at 125 VAC
0.1 A at 30 VDC
3 A at 250 VAC
4 A at 30 VAC
Microload:
0.1 A at 125 VAC
0.1 A at 30 VDC
Ratings
Contact Ratings Silver Alloy Contacts (for Standard Loads)
| Rated voltage (V) | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|
| Resistive load | Lamp load | Inductive load | Motor load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
| 125 VAC 250 VAC | 5 3 | 0.7 0.5 | 3 2 | 1.3 0.8 | ||||
| 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC | 5 5 4 0.4 0.2 | 2 2 2 0.05 0.03 | 4 4 3 0.4 0.2 | 3 3 3 0.05 0.03 | ||||
Note:
1. The above values are for steady-state currents.
2. Inductive load: Power factor = 0.4; time constant = 7 ms.
3. The lamp load has an inrush current of 10 times the steady-state current.
4. The motor load has an inrush current of 6 times the steady-state current.
Standard testing condition
(1) Ambient temperature: 20 ± 2°C
(2) Ambient humidity: 65 ± 5%RH
(3) Operating frequency: 20 times/min.
Gold Alloy Contacts (for Microloads)
| Rated voltage (V) | 0.1 A at 30 VDC (resistive load); 0.1 A at 125 VAC (resistive load) |
|---|---|
| Minimum applicable load | 1 mA at 5 VDC |
Bullet Shape LED and LED Lamp Ratings
Bullet Shape LEDs
| Model | A3PJ/M2PJ | A3PA/M2PA | |
|---|---|---|---|
| Rated current | Rated current | ||
| Applied voltage | Rated voltage | Single screen | Single screen |
| 5 VDC ±5% | 5 VDC | 40 mA | 20 mA |
| 12 VDC ±5% | 12 VDC | 20 mA | 10 mA |
| 24 VDC ±5% | 24 VDC | 10 mA | |
LED Lamps
| Applied voltage | Rated voltage | Rated current |
|---|---|---|
| 5 VDC±5% | 5 VDC | 8 mA |
| 12 VAC/VDC±5% | 12 VDC | |
| 24 VAC/VDC±5% | 24 VDC |
Characteristics
| Operating frequency | Mechanical | 120 operations/minute max. *1 | |
|---|---|---|---|
| Electrical | 30 operations/minute max. | ||
| Insulation resistance | 100 MΩ min. (at 500 VDC) | ||
| Contact resistance | Standard load | 40 mΩ max. (initial value) | |
| Microload | 100 mΩ max. (initial value) | ||
| Dielectric strength | Between terminals of same polarity | 1,000 VAC, 50/60 Hz for 1 minute *2 | |
| Between terminals of different polarity | 2,000 VAC, 50/60 Hz for 1 minute | ||
| Between current-carrying metal part and ground | 2,000 VAC, 50/60 Hz for 1 minute | ||
| Between each terminal and non-current-carrying metal part | 2,000 VAC, 50/60 Hz for 1 minute | ||
| Between lamp terminals | 1,000 VAC, 50/60 Hz for 1 minute *3 | ||
| Vibration resistance | Malfunction | 10 to 55 Hz, 1.5 mm double amplitude (1 ms max.) | |
| Shock resistance | Destruction | 500 m/s2 max. | |
| Malfunction | 200 m/s2 max. (1 ms max.) | ||
| Life expectancy | Mechanical | Momentary operation models: 1,000,000 operations min. Alternate operation models: 200,000 operations min. (One operation consists of set and reset operations.) | |
| Electrical | 100,000 operations min. | ||
| Weight | Approx. 30 g | ||
| Inrush current | NC | Silver contact: 10 A max. | |
| NO | Silver contact: 10 A max. | ||
| Ambient operating temperature | Bullet Shape LEDs: -10°C to 40°C (with no icing or condensation) LED Lamps: -10°C to 50°C (with no icing or condensation) | ||
| Ambient operating humidity | 35% to 85%RH | ||
| Ambient storage temperature | -25°C to 65°C | ||
| Degree of protection | IP40 | ||
| Electric shock protection class | Class II | ||
| PTI (proof tracking index) | 175 | ||
| Pollution degree | 3 (IEC947-5-1) | ||
*1. With alternate operation models, 60 operations/minute max. One operation cycle consists of set and reset operations.
*2. 600 VAC for microloads.
*3. With no incandescent lamp or LED lamp mounted.
Operating Characteristics
| Model | A3PJ series | A3PA series | A3PT series | ||||
|---|---|---|---|---|---|---|---|
| Operating Characteristics | Momentary operation models | Alternate operation models | Momentary operation models | Alternate operation models | Momentary operation models | Alternate operation models | |
| Operating force | OF max. | 5.88 N | 6.86 N | 5.88 N | 6.86 N | 3.92 N | 4.90 N |
| Releasing force | RF min. | 0.39 N | 0.29 N | 0.39 N | 0.29 N | 0.39 N | 0.29 N |
| Total travel | TT | Approx. 3.5 mm | Approx. 3.5 mm | Approx. 3.5 mm | Approx. 3.5 mm | Approx. 3.5 mm | Approx. 3.5 mm |
| Pretravel | PT max. | 3 mm | 3 mm | 3 mm | 3 mm | 3 mm | 3 mm |
| Lock travel alternate | LTA min. | — | 0.5 mm | — | 0.5 mm | — | 0.5 mm |
Kích thước
(Unit: mm)
A3PJ (Rectangular) Models
A3PA (Square) Models
A3PT (Round) Models
Panel Cutout
(If you use a Switch Guard or Seal Cover, refer to Switch and Guard Mounting Dimensions or Seal Cover Mounting Dimensions in the A3P datasheet.)
A3PJ (Rectangular) Models
Note:
1. n: Number of Units
2. Recommended panel thickness: 1 to 5 mm
3. Mount the panel before mounting the Switch Guard.
4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.
A3PA (Square) Models
Note:
1. n: Number of Units
2. Recommended panel thickness: 1 to 5 mm
3. Mount the panel before mounting the Switch Guard.
4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.
A3PT (Round) Models
Note:
1. Recommended panel thickness: 1 to 5 mm
2. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.
MODEL
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | A3P | Item list of A3P |
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | A3P |  |
Hãy là người đầu tiên nhận xét “Nút nhấn có đèn Omron A3P (Loại siêu sáng)”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.