Nút nhấn Omron A165S/W

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Danh mục: CÔNG TẮC OMRON, NÚT NHẤN/ ĐÈN BÁO, OMRON Từ khóa: cảm biến áp suất, cảm biến omron, cảm biến omron giá rẻ, nút nhấn, nút nhấn omron

Xây dựng riêng biệt với hình trụ 16-dia.

• Cấu trúc riêng biệt tương tự như Nút bấm sê-ri A16 với Thiết kế thu nhỏ 28,5 mm

• Các tiếp điểm giống nhau có thể được sử dụng cho cả tải tiêu chuẩn và vi tải.

• Các mẫu IP65 chống dầu

• Tuân theo EN60947-5-1.

Đặc điểm

Ordering as a Set

The model numbers used to order sets of Units are given in the following tables. One set comprises the Selector, Lamp (lighted models only), and Switch.

Solder Terminals

Rectangular

A165[]-J

No. of notches	Output	Reset method	Lighting method	Model
2 notches	SPDT	Manual	LED	A165W-J2M[]-24D-1
		Manual	Non-lighted	A165S-J2M-1
		Automaticl	LED	A165W-J2A[]-24D-1
		Automaticl	Non-lighted	A165S-J2A-1
	DPDT	Manual	LED	A165W-J2M[]-24D-2
		Manual	Non-lighted	A165S-J2M-2
		Automaticl	LED	A165W-J2A[]-24D-2
		Automaticl	Non-lighted	A165S-J2A-2
3 notches	DPDT	Manual	LED	A165W-J3M[]-24D-2
3 notches	DPDT	Manual	Non-lighted	A165S-J3M-2

Note: Enter the desired color symbol for the Selector in []: R (red); Y (yellow); G (green). The Selector for non-lighted
models is black.

Square

A165[]-A

No. of notches	Output	Reset method	Lighting method	Model
2 notches	SPDT	Manual	LED	A165W-A2M[]-24D-1
		Manual	Non-lighted	A165S-A2M-1
		Automaticl	LED	A165W-A2A[]-24D-1
		Automaticl	Non-lighted	A165S-A2A-1
	DPDT	Manual	LED	A165W-A2M[]-24D-2
		Manual	Non-lighted	A165S-A2M-2
		Automaticl	LED	A165W-A2A[]-24D-2
		Automaticl	Non-lighted	A165S-A2A-2
3 notches	DPDT	Manual	LED	A165W-A3M[]-24D-2
3 notches	DPDT	Manual	Non-lighted	A165S-A3M-2

Note: Enter the desired color symbol for the Selector in []: R (red); Y (yellow); G (green). The Selector for non-lighted
models is black.

Round

A165[]-T

No. of notches	Output	Reset method	Lighting method	Model
2 notches	SPDT	Manual	LED	A165W-T2M[]-24D-1
		Manual	Non-lighted	A165S-T2M-1
		Automaticl	LED	A165W-T2A[]-24D-1
		Automaticl	Non-lighted	A165S-T2A-1
	DPDT	Manual	LED	A165W-T2M[]-24D-2
		Manual	Non-lighted	A165S-T2M-2
		Automaticl	LED	A165W-T2A[]-24D-2
		Automaticl	Non-lighted	A165S-T2A-2
3 notches	DPDT	Manual	LED	A165W-T3M[]-24D-2
3 notches	DPDT	Manual	Non-lighted	A165S-T3M-2

Note: Enter the desired color symbol for the Selector in []: R (red); Y (yellow); G (green). The Selector for non-lighted
models is black.

Ordering Individually

Selectors, Lamps, and Switches can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs.

Please click image to enlarge (open in a new window).

Selectors (Oil-resistant IP65 Models Only)

Appearance	Number of notches	Reset method	Lighting method	Model	Selector color symbol
Rectangular (A165[]-J)	2 notches	Manual	LED	A165W-J2M[]	Enter the desired color symbol for the Selector in[] . R (red), Y (yellow), G (green)
		Manual	Non-lighted	A165S-J2M
		Automatic	LED	A165W-J2A[]
		Automatic	Non-lighted	A165S-J2A
	3 notches	Manual	LED	A165W-J3M[]
		Manual	Non-lighted	A165S-J3M
		Fully automatic	LED	A165W-J3A[]
		Fully automatic	Non-lighted	A165S-J3A
Square (A165[] -A)	2 notches	Manual	LED	A165W-A2M[]	Enter the desired color symbol for the Selector in[] . R (red), Y (yellow), G (green)
		Manual	Non-lighted	A165S-A2M
		Automatic	LED	A165W-A2A[]
		Automatic	Non-lighted	A165S-A2A
	3 notches	Manual	LED	A165W-A3M[]
		Manual	Non-lighted	A165S-A3M
		Fully automatic	LED	A165W-A3A[]
		Fully automatic	Non-lighted	A165S-A3A
Round (A165[] -T)	2 notches	Manual	LED	A165W-T2M[]	Enter the desired color symbol for the Selector in[] . R (red), Y (yellow), G (green)
		Manual	Non-lighted	A165S-T2M
		Automatic	LED	A165W-T2A[]
		Automatic	Non-lighted	A165S-T2A
	3 notches	Manual	LED	A165W-T3M[]
		Manual	Non-lighted	A165S-T3M
		Fully automatic	LED	A165W-T3A[]
		Fully automatic	Non-lighted	A165S-T3A

Note: The selector for non-lighted models is black.

Sets

Select an Operation Unit and a Switch Unit (Lamp and Switch).

Please click image to enlarge (open in a new window).

Switch Units (A Switch Unit includes a Switch and a Lamp.)

Appearance	Number of notches	Classification			Model
	2 notches	SPDT	24 V	Solder terminals	A16W-2N[]-24D-1
	2 notches	DPDT			A16W-2N[]-24D-2
	3 notches	DPDT			A16W-3N[]-24D-2

Switch Units with Voltage Reduction Units (Solder Terminals)

Appearance	Classification			Operating voltage	Model
	Standard loads and microloads	2 notches	SPDT	100/110 VAC/VDC	A16L-[]-T1-1
		2 notches	DPDT		A16L-[]-T1-2
		3 notches	DPDT		A16W-3N[]-T1-2

Note: The LED has a 24-VAC/VDC circuit built in.

Insert one of the following letters into the box ([]).

Symbol	Light color
R	Red
Y	Yellow
G	Green

Switch Units with Screw-less Clamp Connectors

Classification					Model	Remarks
Standard loads and microloads	2 notches DPDT	Non-lighted			A16-2S	Used for Pushbutton Switches and Knob-type Selector Switches.
		Lighted	No voltage-reduction lighting		A16L-Δ-[]-2S
			Voltage- reduction lighting	100/110 VAC/VDC	A16L-Δ-T1-2S
			Voltage- reduction lighting	200/220 VAC/VDC	A16L-Δ-T2-2S
	3 notches DPDT	Non-lighted			A16S-3N-2LS
		Lighted	No voltage-reduction lighting		A16W-3NΔ-[]-2S
			Voltage- reduction lighting	100/110 VAC/VDC	A16W-3N-Δ-T1-2S
			Voltage- reduction lighting	200/220 VAC/VDC	A16W-3N-Δ-T2-2S

Note: The 100-V models and 200-V models have a 24-VAC/VDC circuit built in.

Insert symbols in Δ and [].

Δ

Symbol	Light color
R	Red
Y	Yellow
G	Green

[]

Symbol	Type	Operating voltage
5D	LED	5 VDC
12D		12 VAC/VDC
24D		24 VAC/VDC

Ordering Individually

Switches

Classification					Model
Lighted	Switches (without voltage- reduction lighting)	2 notches	SPDT	Solder terminal	A16S-2N-1L
		2 notches	DPDT		A16S-2N-2L
		3 notches	DPDT		A16S-3N-2L
Non-lighted		2 notches	SPDT		A16S-2N-1
		2 notches	DPDT		A16S-2N-2
		3 notches	DPDT		A16S-3N-2
Lighted		2 notches	SPDT	PCB terminal	A16S-2N-1LP
Lighted			DPDT		A16S-2N-2LP
Non-lighted			SPDT		A16S-2N-1P
Non-lighted			DPDT		A16S-2N-2P

Lamps

Operating voltage	Super-bright
Light color	5 VDC	12 VAC/VDC	24 VAC/VDC
Red	A16-5DSR	A16-12DSR	A16-24DSR
Yellow	A16-5DSY	A16-12DSY	A16-24DSY
Green	A16-5DSG	A16-12DSG	A16-24DSG

Accessories and Tools (Order Separately)

Accessories

Name	Appearance	Classification	Model	Remarks
Panel Plugs		Rectangular	A16ZJ-3003	Used for covering the panel cutouts for future panel expansion. Degree of protection: IP40
		Square	A16ZA-3003
		Round	A16ZT-3003

Tools

Name	Appearance	Model	Applicable types					Remarks
Name	Appearance	Model	Push- button Switch	Knob- type Selector Switch	Key-type Selector Switch	Emer- gency Stop Switch	Indicator	Remarks
Screw Fitting		A16Z-3004	Yes	Yes	Yes	Yes	Yes	Convenient for ganged installation. Tighten to a torque of 0.39 Nm min.
Extractor		A16Z-5080	Yes	Yes	Yes	Yes	Yes	Convenient for extracting the Switches and Lamps.

Thông số kỹ thuật

Approved Standard Ratings

UL, cUL (File No. E41515)

5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
Note: Certification has been obtained for the Switch.
For detailed information on individual products that have received certification, consult your supplier.

TÜV (EN60947-5-1) (Low Voltage Directive)

3 A at 250 VAC
3 A at 30 VDC

CCC (GB/T14048.5)

5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC

Ratings

Switch Ratings

Rated voltage	Resistive load
125 VAC	5A
250 VAC	3A
30 VDC	3A

Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20±2°C
4. Operating frequency: 20 times/min

Contact Form

Name	Contact form
SPDT

Super-bright LED

Rated voltage	Rated current	Operating voltage	Internal limiting resistor
5 VDC	8 mA	5 VDC ± 5%	Red, yellow: 300 Ω Green: 160 Ω
12 VAC/VDC		12 VAC/VDC ± 5%	Red, yellow: 1 kΩ Green: 910 Ω
24 VAC/VDC		24 VAC/VDC ± 5%	2.4 kΩ

Characteristics

Socket Unit

Type		Knob-type Selector Switch
Allowable operating frequency	Mechanical	20 operations/minute max.
Allowable operating frequency	Electrical	10 operations/minute max.
Insulation resistance		100 MΩ min. (at 500V DC)
Contact resistance		100 mΩ max. (initial value)
Dielectric strength	Between terminals of same polarity	1,000 VAC, 50/60 Hz for 1 min
	Between terminals of different polarity	2,000 VAC, 50/60 Hz for 1 min
	Between each terminal and ground	2,000 VAC, 50/60 Hz for 1 min
	Between lamp terminals	1,000 VAC, 50/60 Hz for 1 min *
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
Shock resistance	Destruction	500 m/s² max.
Shock resistance	Malfunction	150 m/s² max. (malfunction within 1 ms)
Durability	Mechanical	250,000 operations min.
Durability	Electrical	100,000 operations min.
Electric shock protection class		Class II
PTI (tracking characteristic)		175
Degree of contamination		3 (IEC60947-5-1)
Weight		Approx. 13 g (in the case of a lighted DPDT switch)
Ambient operating temperature		-10°C to 55°C (with no icing or condensation)
Ambient operating humidity		35% to 85%RH
Ambient storage temperature		-25°C to 65°C (with no icing or condensation)

* With LED not mounted.
(Perform testing with the LED not mounted.)

Screw-less Clamp

Item	Type	Screw-less Clamp
Recommended wire size		0.5 mm² twisted wire or 0.8 mm-dia. solid wire
Usable wires and tensile strength	Twisted wire	0.3 mm²	0.5 mm²	0.75 mm²	1.25 mm²
	Solid wire	0.5 mm dia.	0.8 mm dia.	1.0 mm dia.	—
	Tensile strength	10 N	20 N	30 N	40 N
Length of exposed wire		10 ± 1 mm
Compliant		JIS C 2811 Terminal Blocks for Industrial Use

Operating Characteristics

Type	Knob-type Selector Switch
Characteristics	2 notches	3 notches
Operating torque (OF) max.	0.1 Nm
Set position (SP)	90 ± 5 °	45°+10, 0

Kích thước

(Unit: mm)

• The Dimension shows 2-switch outputs.
• The lamp terminal is not provided with non-lighted models.

Rectangular A165[]-J
Solder terminals (tab terminals #110)

Note: See below for panel cutouts.

Square A165[]-A
Solder terminals (tab terminals #110)

Note: See below for panel cutouts.

Round A165[]-T
Solder terminals (tab terminals #110)

Note: See below for panel cutouts.

Rectangular A165[]-J
PCB terminals

The lamp terminal is not also provided with nonlighted models.
Note: See below for panel cutouts.

Rectangular A165W[]-T
Reduced-voltage lighting solder terminals (tab terminals #110)

Rectangular A165[]-2S
Screw-Less Clamp

The lamp terminal is also provided with nonlighted models.

Panel Cutouts

Models with Solder Terminals and Models with Screw-less Clamp Connectors

Please click image to enlarge (open in a new window).

Note: 1. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm.
2. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after
coating.
3. Figures in parentheses are for screw-less clamp connectors.

Models with PCB Terminals

Please click image to enlarge (open in a new window).

Note: 1. Ensure that the variation in the distance between the centers of neighboring mounting holes is less than ±0.1
mm.
2. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm. If, however, a Switch Guard or Dust Cover is
used, the thickness of the mounting panel must be 0.5 to 2 mm.
3. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after
coating.

MODEL

STT	Chi tiết	Tiêu đề	Tải xuống
1	DANH SÁCH MODEL	A165S/ W	Item list of A165S/ W

TÀI LIỆU

STT	Chi tiết	Tiêu đề	Tải xuống
1	TÀI LIỆU	A165S/ W

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Nút nhấn Omron A165S/W” Hủy

xem thêm

Nút nhấn Omron A165S/W

Liên Hệ Tư Vấn

Xây dựng riêng biệt với hình trụ 16-dia.

Đặc điểm

Ordering as a Set

Solder Terminals

Rectangular

A165[]-J

Square

A165[]-A

Round

A165[]-T

Ordering Individually

Selectors (Oil-resistant IP65 Models Only)

Sets

Switch Units (A Switch Unit includes a Switch and a Lamp.)

Switch Units with Voltage Reduction Units (Solder Terminals)

Insert one of the following letters into the box ([]).

Switch Units with Screw-less Clamp Connectors

Δ

[]

Ordering Individually

Switches

Lamps

Accessories and Tools (Order Separately)

Accessories

Tools

Thông số kỹ thuật

Approved Standard Ratings

UL, cUL (File No. E41515)

TÜV (EN60947-5-1) (Low Voltage Directive)

CCC (GB/T14048.5)

Ratings

Switch Ratings

Contact Form

Super-bright LED

Characteristics

Socket Unit

Screw-less Clamp

Operating Characteristics

Kích thước

Rectangular A165[]-J Solder terminals (tab terminals #110)

Square A165[]-A Solder terminals (tab terminals #110)

Round A165[]-T Solder terminals (tab terminals #110)

Rectangular A165[]-J PCB terminals

Rectangular A165W[]-T Reduced-voltage lighting solder terminals (tab terminals #110)

Rectangular A165[]-2S Screw-Less Clamp

Panel Cutouts

Models with Solder Terminals and Models with Screw-less Clamp Connectors

Models with PCB Terminals

MODEL

TÀI LIỆU

Đánh giá

Hãy là người đầu tiên nhận xét “Nút nhấn Omron A165S/W” Hủy

SẢN PHẨM LIÊN QUAN

Đăng nhập

Rectangular A165[]-J
Solder terminals (tab terminals #110)

Square A165[]-A
Solder terminals (tab terminals #110)

Round A165[]-T
Solder terminals (tab terminals #110)

Rectangular A165[]-J
PCB terminals

Rectangular A165W[]-T
Reduced-voltage lighting solder terminals (tab terminals #110)

Rectangular A165[]-2S
Screw-Less Clamp