Bộ nguồn Hanyoung DPS-15S48

Liên hệ

Liên hệ :

08 88 44 88 99

Liên hệ :

0978 63 73 78

Liên hệ :

0909 63 73 78

Liên Hệ Tư Vấn

Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn

Categories: HANYOUNG NUX, TPR/SSR/SMPS

DPS-15S48	DPS-30S48	DPS-50S48	DPS-75S48
DPS-15S24	DPS-30S24	DPS-50S24	DPS-75S24
DPS-15S15	DPS-30S15	DPS-50S15	DPS-75S15
DPS-15S12	DPS-30S12	DPS-50S12	DPS-75S12
DPS-15S5	DPS-30S5	DPS-50S5	DPS-75S5
DPS-100S48	DPS-120S48	DPS-180S48	DPS-240S48
DPS-100S24	DPS-120S24	DPS-180S24	DPS-240S24
DPS-100S15	DPS-120S15	DPS-180S15	DPS-240S15
DPS-100S12	DPS-120S12	DPS-180S12	DPS-240S12
DPS-100S5	DPS-120S5	DPS-180S5	DPS-240S5

– Dòng DPS
– Kiểu lắp đặt đường ray DIN
– Tự động lựa chọn điện áp đầu vào nhờ chức năng tự động lựa chọn đầu vào
– Quá dòng, quá áp, quá tải với chức năng bảo vệ quá mức
– Điều chỉnh điện áp đầu ra thấp
– Đa dạng sản phẩm từ 15W đến 240W
– Việc thực hiện nhiệt thấp do hiệu quả cao
– Được trang bị đèn hoa tiêu BẬT điện áp đầu ra
– Được trang bị đầu ra rơle tín hiệu DC OK

· Suffix code

Model	Code			Description
DPS-				DPS Power supply (DIN Rail Type)
Power output	15			15 W
	30			30 W
	50			50 W
	75			75 W
	100			100 W
	120			120W
	180			180 W
	240			240 W (※ Only DPS-240S-12 : 216 W)
Number of output voltage		S		1 Output (Single output)
Output voltage classification			48	48 V DC (DPS-15S, DPS-30S, DPS-50S Exclude)
			24	24 V DC
			15	15 V DC (DPS-75S, DPS-100S, DPS-120S, DPS-180S, DPS-240S Exclude)
			12	12 V DC (DPS-180S Exclude)
			5	5 V DC (DPS-75S, DPS-100S, DPS-120S, DPS-180S, DPS-240S Exclude)

· Specification

[ 15 Watt (5 V, 12 V, 15 V, 24 V d.c.) ]

Model			DPS-15S-05	DPS-15S-12	DPS-15S-15	DPS-15S-24
Output	Rated output voltage		5 V	12 V	15 V	24 V
	Rated output current		3 A	1.3 A	1 A	0.63 A
	Rated power output		15 W
	Peak current		3.6 A	1.44 A	1.2 A	0.75 A
	Circuit voltage fluctuation rate		±0.5 %	±0.5 %	±0.5 %	±0.5 %
	Load voltage fluctuation rate		±1 %	±1 %	±1 %	±1 %
	Ripple		80 ㎷ p-p max	120 ㎷ p-p max	120 ㎷ p-p max	150 ㎷ p-p max
	Ambient temperature fluctuation		±1 %	±1 %	±1 %	±1 %
	Running time		200 ㎳ max (110 V AC, Io=100 %)
	Remaining time		10 ㎳ min (110 V AC, Io=100 %)
	Voltage fluctuation range		4.6 – 5.3 V	11.2 – 13.7 V	13.6 – 16.1 V	22.6 – 27.6 V
	Voltage setting range		±1 % max (Rated output voltage)
Input	Input voltage		100 – 240 V AC (※ Designed voltage range : 85 – 264 V AC)
	Input frequency		50 – 60 ㎐ (47 – 63 ㎐)
	Current (A)	110 V AC	0.3	0.3	0,3	0.3
		220 V AC	0.16	0.16	0.16	0.16
	Efficiency	220 V AC	76 %	81 %	82 %	86 %
	Inrush current	110 V AC	20 A Typ. (Ta=25 ℃, Io=100 % at Cold start)
		220 V AC	40 A Typ. (Ta=25 ℃, Io=100 % at Cold start)
	Leakage current	110 V AC	0.35 ㎃ max
		220 V AC	0.75 ㎃ max
Protection function	Over current protection		Protective function performed within 110 ~ 200 % of the rated output current
	Over voltage protection		6.8 – 7.9 V	14.5 – 17.2 V	17.5 – 20.5 V	30 – 36 V
	Overheating protection		Protection circuit is in operation when PWM controller’s junction temperature is over 135~140℃.
	Protection of output short		Auto Re-start
	DC OK Signal		Green LED (ON when output voltage is normal)
ETC	Dielectric strength		2,700 V AC for 1 min, Detection current =10 ㎃, (Input – Output)
			1,500 V AC for 1 min, Detection current = 10 ㎃, (Input . FG)
			500 V AC for 1 min, Detection current = 10 ㎃, (Output – FG)
			500 V AC for 1 min, Detection current = 10 ㎃, (Output . DC OK)
	Insulation resistance		50 ㏁ min. (Input – Output, FG), (Output – FG, DC OK)
Environment	Ambient temperature		– 25 ~ +50 ℃ (Refer to the derating curve of output load )
	Ambient humidity		20 ~ 90 % RH (With no condensation)
	Storage temperature		– 40 ~ +85 ℃ (With no condensation)
	Vibration resistance		10 – 55 ㎐, peak amplitude 0.375 ㎜, 2 hours for each of 3 directions (DIN Rail is installed without applying voltage)
	Shock resistance		150 ㎨, 3 times for each of 6 directions . (State of packing)
	Weight		150 g	144 g	144 g	140 g

[ 30 Watt (5 V, 12 V, 15 V, 24 V d.c.) ]

Model			DPS-30S-05	DPS-30S-12	DPS-30S-15	DPS-30S-24
Output	Rated output voltage		5 V	12 V	15 V	24 V
	Rated output current		6 A	2.5 A	2 A	1.25 A
	Rated power output		30 W
	Peak current		7.2 A	3.0 A	2.4 A	1.5 A
	Circuit voltage fluctuation rate		±0.5 %	±0.5 %	±0.5 %	±0.5 %
	Load voltage fluctuation rate		±1 %	±1 %	±1 %	±1 %
	Ripple		80 ㎷ p-p max	120 ㎷ p-p max	120 ㎷ p-p max	150 ㎷ p-p max
	Ambient temperature fluctuation		±1 %	±1 %	±1 %	±1 %
	Running time		200 ㎳ max (110 V AC, Io=100 %)
	Remaining time		10 ㎳ min (110 V AC, Io=100 %)
	Voltage fluctuation range		4.6 – 5.3 V	11.2 – 13.7 V	13.6 – 16.1 V	22.6 – 27.6 V
	Voltage setting range		±1 % max (Rated output voltage)
Input	Input voltage		100 – 240 V AC (※ Designed voltage range : 85 – 264 V AC)
	Input frequency		50 – 60 ㎐ (47 – 63 ㎐)
	Current (A)	110 V AC	0.53	0.53	0.53	0.53
		220 V AC	0.3	0.3	0.3	0.3
	Efficiency	220 V AC	82 %	85 %	86 %	86 %
	Inrush current	110 V AC	20 A Typ. (Ta=25 ℃, Io=100 % at Cold start)
		220 V AC	40 A Typ. (Ta=25 ℃, Io=100 % at Cold start)
	Leakage current	110 V AC	0.35 ㎃ max
		220 V AC	0.75 ㎃ max
Protection function	Over current protection		Protective function performed within 110 ~ 200 % of the rated output current
	Over voltage protection		6.8 – 7.9 V	14.5 – 17.2 V	17.5 – 20.5 V	30 – 36 V
	Overheating protection		Protection circuit is in operation when PWM controller’s junction temperature is over 135~140℃.
	Protection of output short		Auto Re-start
	DC OK Signal		Green LED (ON when output voltage is normal)
ETC	Dielectric strength		2,700 V AC for 1 min, Detection current =10 ㎃, (Input – Output)
			1,500 V AC for 1 min, Detection current = 10 ㎃, (Input . FG)
			500 V AC for 1 min, Detection current = 10 ㎃, (Output – FG)
			500 V AC for 1 min, Detection current = 10 ㎃, (Output . DC OK)
	Insulation resistance		50 ㏁ min. (Input – Output, FG), (Output – FG, DC OK)
Environment	Ambient temperature		– 25 ~ +50 ℃ (Refer to the derating curve of output load )
	Ambient humidity		20 ~ 90 % RH (With no condensation)
	Storage temperature		– 40 ~ +85 ℃ (With no condensation)
	Vibration resistance		10 – 55 ㎐, peak amplitude 0.375 ㎜, 2 hours for each of 3 directions (DIN Rail is installed without applying voltage)
	Shock resistance		150 ㎨, 3 times for each of 6 directions . (State of packing)
	Weight		262 g	242 g	242 g	244 g

[ 50 Watt (5 V, 12 V, 15 V, 24 V d.c.) ]

Model			DPS-50S-05	DPS-50S-12	DPS-50S-15	DPS-50S-24
Output	Rated output voltage		5 V	12 V	15 V	24 V
	Rated output current		10 A	4.2 A	3.4 A	2.1 A
	Rated power output		50 W
	Peak current		12 A	5.04 A	4.08 A	2.52 A
	Circuit voltage fluctuation rate		±0.5 %	±0.5 %	±0.5 %	±0.5 %
	Load voltage fluctuation rate		±1 %	±1 %	±1 %	±1 %
	Ripple		80 ㎷ p-p max	120 ㎷ p-p max	120 ㎷ p-p max	150 ㎷ p-p max
	Ambient temperature fluctuation		±1 %	±1 %	±1 %	±1 %
	Running time		200 ㎳ max (110 V AC, Io=100 %)
	Remaining time		10 ㎳ min (110 V AC, Io=100 %)
	Voltage fluctuation range		4.6 – 5.3 V	11.2 – 13.7 V	13.6 – 16.1 V	22.6 – 27.6 V
	Voltage setting range		±1 % max (Rated output voltage)
Input	Input voltage		100 – 240 V AC (※ Designed voltage range : 85 – 264 V AC)
	Input frequency		50 – 60 ㎐ (47 – 63 ㎐)
	Current (A)	110 V AC	0.9	0.9	0.9	0.9
		220 V AC	0.5	0.5	0.5	0.5
	Efficiency	220 V AC	81 %	86 %	88 %	88 %
	Inrush current	110 V AC	20 A Typ. (Ta=25 ℃, Io=100 % at Cold start)
		220 V AC	40 A Typ. (Ta=25 ℃, Io=100 % at Cold start)
	Leakage current	110 V AC	0.35 ㎃ max
		220 V AC	0.75 ㎃ max
Protection function	Over current protection		Protective function performed within 110 ~ 200 % of the rated output current
	Over voltage protection		6.8 – 7.9 V	14.5 – 17.2 V	17.5 – 20.5 V	30 – 36 V
	Overheating protection		Protection circuit is in operation when PWM controller’s junction temperature is over 135~140℃.
	Protection of output short		Auto Re-start
	DC OK Signal		Green LED (ON when output voltage is normal)
ETC	Dielectric strength		2,700 V AC for 1 min, Detection current =10 ㎃, (Input – Output)
			1,500 V AC for 1 min, Detection current = 10 ㎃, (Input . FG)
			500 V AC for 1 min, Detection current = 10 ㎃, (Output – FG)
			500 V AC for 1 min, Detection current = 10 ㎃, (Output . DC OK)
	Insulation resistance		50 ㏁ min. (Input – Output, FG), (Output – FG, DC OK)
Environment	Ambient temperature		– 25 ~ +50 ℃ (Refer to the derating curve of output load )
	Ambient humidity		20 ~ 90 % RH (With no condensation)
	Storage temperature		– 40 ~ +85 ℃ (With no condensation)
	Vibration resistance		10 – 55 ㎐, peak amplitude 0.375 ㎜, 2 hours for each of 3 directions (DIN Rail is installed without applying voltage)
	Shock resistance		150 ㎨, 3 times for each of 6 directions . (State of packing)
	Weight		274 g	270 g	268 g	266 g

[ 75 Watt (12 V, 24 V, 48 V d.c.) ]

Model			DPS-75S-12	DPS-75S-24	DPS-75S-48
Output	Rated output voltage		12 V	24 V	48 V
	Rated output current		6.3 A	3.2 A	1.9 A
	Rated power output		75 W
	Peak current		7.5 A	3.8 A	1.9 A
	Circuit voltage fluctuation rate		±0.5 %	±0.5 %	±0.5 %
	Load voltage fluctuation rate		±1 %	±1 %	±1 %
	Ripple		120 ㎷ p-p max	150 ㎷ p-p max	240 ㎷ p-p max
	Ambient temperature fluctuation		±1 %	±1 %	±1 %
	Running time		200 ㎳ max (110 V AC, Io=100 %)
	Remaining time		10 ㎳ min (110 V AC, Io=100 %)
	Voltage fluctuation range		11.2 – 13.7 V	22.6 – 27.6 V	45.2 – 50.1 V
	Voltage setting range		±1 % max (Rated output voltage)
Input	Input voltage		100 – 240 V AC (※Designed voltage range : 85 – 264 V AC)
	Input frequency		50 – 60 ㎐ (47 – 63 ㎐)
	Current (A)	110 V AC	1.3	1.3	1,3
		220 V AC	0.71	0.71	0.71
	Efficiency	220 V AC	85 %	86 %	90 %
	Inrush current	110 V AC	20 A Typ. (Ta=25 ℃, Io=100 % at Cold start)
		220 V AC	40 A Typ. (Ta=25 ℃, Io=100 % at Cold start)
	Leakage current	110 V AC	0.35 ㎃ max
		220 V AC	0.75 ㎃ max
Protection function	Over current protection		Protective function performed within 110 ~ 200 % of the rated output current
	Over voltage protection		14 – 18 V	30 – 34 V	59 – 63 V
	Overheating protection		Protection circuit is in operation when PWM controller’s junction temperature is over 135~140℃
	Protection of output short		Auto Re-start
	DC OK Signal		Green LED (ON when output voltage is normal)
	DC OK Output		Relay output (ON when rated output is over 85%), 250 V AC 1 A max, 30 V DC 1 A max)
ETC	Dielectric strength		2,700 V AC for 1 min, Detection current = 10 ㎃, (Input – Output)
			1,500 V AC for 1 min, Detection current = 10 ㎃, (Input . FG)
			500 V AC for 1 min, Detection current = 10 ㎃, (Output – FG)
			500 V AC for 1 min, Detection current = 10 ㎃, (Output . DC OK)
	Insulation resistance		50 ㏁ min. (Input – Output, FG), (Output – FG, DC OK)
Environment	Ambient temperature		– 25 ~ +70 ℃ (Refer to the derating curve of output load)
	Ambient humidity		20 ~ 90 % RH (With no condensation)
	Storage temperature		– 40 ~ +85 ℃ (With no condensation)
	Vibration resistance		10 – 55 ㎐, peak amplitude 0.375 ㎜, 2 hours for each of 3 directions (DIN Rail is installed without applying voltage)
	Shock resistance		150 ㎨, 3 times for each of 6 directions (State of packing)
	Weight		536 g	528 g	524 g