| Power supply voltage | Output configuration | Resolution (divisions) |
Connector for H8PS Cam Positioner |
Model |
|---|---|---|---|---|
| 5 to 12 VDC | Open-collector output | 256 (8-bit) | None | E6CP-AG3C 256P/R 2M |
| 12 to 24 VDC | E6CP-AG5C 256P/R 2M | |||
| Supported | E6CP-AG5C-C 256P/R 2M |
Bộ mã hóa vòng quay Omron E6CP-A
Liên hệ
Liên hệ :
08 88 44 88 99
Liên hệ :
0978 63 73 78
Liên hệ :
0909 63 73 78
Liên Hệ Tư Vấn
Lưu ý: Quý khách có thể tùy chọn mẫu sản phẩm hoặc liên hệ để được tư vấn
Bộ mã hóa tuyệt đối đa năng với đường kính ngoài 50 mm
• Mô hình tuyệt đối.
• Đường kính ngoài 50 mm.
• Độ phân giải: 256 (8-bit).
• Kết cấu nhẹ sử dụng thân nhựa.
Đặc điểm
Encoders
Note: When connecting to the H8PS, use the E6CP-AG5C-C, which is connected using a connector. It cannot be used on
other models.
other models.
Accessories (Order Separately)
| Name | Model | Remarks | |
|---|---|---|---|
| Couplings | E69-C06B | Provided with the E6CP-AG3C and E6CP-AG5C. | |
| E69-C68B | Different end diameter | ||
| E69-C610B | Different end diameter | ||
| E69-C06M | Metal construction | ||
| Servo Mounting Bracket | E69-2 | Provided with the product. (Three brackets in a set.) | |
| Extension Cable | E69-DF5 | 5 m | Models are also available with 15-m and 98-m cables. |
| E69-DF10 | 10 m | ||
| E69-DF20 | 20 m | ||
Thông số kỹ thuật
| Model | E6CP-AG3C | E6CP-AG5C | E6CP-AG5C-C | |
|---|---|---|---|---|
| Power supply voltage | 5 VDC -5% to 12 VDC +10%, ripple (p-p): 5% max. |
12 VDC -10% to 24 VDC +15%, ripple (p-p): 5% max. | ||
| Current consumption *1 | 90 mA max. | 70 mA max. | ||
| Resolution (rotations) | 256 (8-bit) | |||
| Output code | Gray code | |||
| Output configuration | Open-collector output | |||
| Output capacity | Applied voltage: 28 VDC max. Sink current: 16 mA max. Residual voltage: 0.4 V max. (at sink current of 16 mA) |
|||
| Maximum response frequency *2 |
5 kHz | |||
| Logic | Negative logic (high = 0, low = 1) | |||
| Accuracy | ±1° max. | |||
| Direction of rotation | Output code incremented by CW (as viewed from the end of the shaft) | |||
| Rise and fall times of output |
1 μs max. (Control output voltage: 16 V, Load resistance: 1 kΩ, Output cable: 2 m max.) | |||
| Starting torque | 0.98 mN·m max. | |||
| Moment of inertia | 1 × 10-6kg·m2 max. | |||
| Shaft loading |
Radial | 29.4 N | ||
| Thrust | 19.6 N | |||
| Maximum permissible speed | 1,000 r/min | |||
| Ambient temperature range | Operating: -10 to 55°C (with no icing), Storage: -25 to 85°C (with no icing) | |||
| Ambient humidity range | Operating/Storage: 35% to 85% (with no condensation) | |||
| Insulation resistance | 200 MΩ min. (at 500 VDC) between current-carrying parts and case | |||
| Dielectric strength | 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case | |||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
|||
| Shock resistance | Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions | |||
| Degree of protection*3 | IEC 60529 IP50 | |||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | Connector Models (Standard cable length: 2 m) |
||
| Material | Case: ABS, Main unit: PPS, Shaft: SUS416, Mounting Bracket: Galvanized iron | |||
| Weight (packed state) | Approx. 200 g | |||
| Accessories | Coupling (excluding Connector Models), Servo Mounting Bracket, Hexagonal wrench (excluding Connector Models), Instruction manual |
|||
*1. An inrush current of approximately 8 A will flow for approximately 0.3 ms when the power is turned ON.
*2. The maximum electrical response speed is determined by the resolution and maximum response frequency as
follows:
*2. The maximum electrical response speed is determined by the resolution and maximum response frequency as
follows:
This means that the Rotary Encoder will not operate electrically if its speed exceeds the maximum electrical
response speed.
*3. No protection is provided against water or oil.
response speed.
*3. No protection is provided against water or oil.
Kích thước
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Encoder
E6CP-AG3C
E6CP-AG5C
The E69-C06B Coupling is provided.
E6CP-AG5C-C
The E69-C06B Coupling is sold separately.
Accessories (Order Separately)
Servo Mounting Bracket
E69-2
Note: Provided with the product.
Extension Cable
E69-DF5
Note: 1. The E69-DF5 (5 m) is also available with the following cable lengths: 10 m, 15 m, 20 m, and 98 m.
2. Cable can be extended to 100 m when the H8PS Cam Positioner is connected.
2. Cable can be extended to 100 m when the H8PS Cam Positioner is connected.
MODEL
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | DANH SÁCH MODEL | E6CP-A | Item list of E6CP-A |
TÀI LIỆU
| STT | Chi tiết | Tiêu đề | Tải xuống |
| 1 | TÀI LIỆU | E6CP-A |  |
Be the first to review “Bộ mã hóa vòng quay Omron E6CP-A”
SẢN PHẨM LIÊN QUAN
Liên hệ
Liên hệ
Liên hệ
Reviews
There are no reviews yet.